G&G LevAR BBA Upgrades Guide

[@LukeBBA]

Couple extra points: Nozzles are a Waldo Dynamics product which I've designed (But not manufactured) and I'll be getting a boatload in on first release! Still on track for late January O-Rings I've used in the video are generic Nitrile O rings I've ordered off amazon but I have ordered a load that I'll be putting up on the website later in the month in packs of 6 The Maple Leaf hop rubber in the video was passable in the sense of it sorted the inconsistency I had with the stock blue G&G bucking but the 4UANTUM bucking was a noticable improvement over the macaron 60.

[@user-gz1pd2fw7q]

Exactly what I was looking for! The timing was so right on this video. Thank you Sir!

[@PierreSoft]

Dude this channel is awesome, making innovative products for airsoft and doing fielded research. great stuff man

[@fukokuroha4094]

I hpa tapped mine, a good sealant material is an absolute MUST. I modified my stock nozzle and bored it out to 4mm to get higher airflow. Couple that with a 6.05 lambda barrel and a truesight bucking I was reaching 300ft+

[@blusox78]

what sealant material did you use? I'm having a devil of a job getting it airtight and stopping the whole assembly from undoing itself.

[@fukokuroha4094]

@blusox78 i found this thick sealant tape called blue monster. I used it on the hpa barb and let it sit overnight before attaching the whole thing back onto the rifle itself.

[@EmDeeCee6147]

I’ve just ordered a 4UAD bucking from your website 👌🏻

[@oaf9531]

Just got my short stroke kit. looking forward to see how much better it is!

[@Trittech]

Awesome company!

[@franciscojavieramezcuafern1209]

Shooting test? ;)😊

[@workhardplayharder4924]

You need to try traditional bucking like laylax's bucking. It's amazing compatible for this system. 😅

[@StantonLuke]

All great information! I have a question about the handguard on the thumbnail.. what is it? Where’s it from?

[@LukeBBA]

Its an aliexpress special 9.5" MK8 repro in green - think it was from "Zero Doman Store" or "AEG Handguard store" on ali

[@deicidedad]

Ive tried Co2 via hpa reg and hpa bottle. The Co2 i found was really inconsistant. Im using a 6.03mm barrel, 70° MrHop bucking and a silent industries hop unit. I use 0.40 as DMR. On hpa good out to irl 90M, Co2 was all over the place, couldnt keep constant fps, as in 15 to 20 fps fluctuations. On mine with gas, green comes in at 1.2J, red 1.3J and 1.9J on black (all nuprol) with .20. That was tested straight out of the box with that (15" version) so ive just run it as a DMR , as per my local sites rules (RedAlert 😊)

[@LukeBBA]

@@deicidedad Interesting! I need to sort my HPA rig out as it would be nice to keep my gas for the blowback rifles :)

[@rickygrimes5422]

I killed my valve doing the hpa setup so be very careful as its the opposite way the valve comes out and yes g&g do the valves so got i couple

[@LukeBBA]

@@rickygrimes5422 noted! I did try and remove my valve just to have a look but its properly in there

[@nanimuwu]

Ever since the closing of the airsoft field in Bristol city centre, where is your go to in the area of Bristol?

[@LukeBBA]

Check this big list I've got on my website of local to vaguely local sites to try bristolbasedairsoft.co.uk/pages/local-site-list

[@nanimuwu]

@LukeBBA 👍

[@WWIIAirsoftGuy]

What grip is that that you have above the V2 grip?

[@LukeBBA]

Not sure if this is what you mean but the part above the grip is the gas resevoir. Ive only got one grip and its the V2 :)

[@WWIIAirsoftGuy]

@ yessir, that’s exactly what I meant! I don’t have a Levar yet, just going down the research rabbit hole for my next build haha. Preciate it!

[@LukeBBA]

@@WWIIAirsoftGuy Theres a diassembly video on my channel as well which goes over how it all comes apart, it explains somewhat how it all works :)

[@MrBurningrubber]

Amazing video thank you. Where did you get the o ring from for the valve mod ?

[@LukeBBA]

I just ordered them off amazon in a pack of 50, I may get loads in to sell myself in the near future for convenience :)

[@TORETOCUSTOMAIRSOFT]

Where can buy nozzle?

[@LukeBBA]

Releasing on my website towards the end of January

[@saionide8995]

@LukeBBA how can one tell the V1/V2 grip??? I purchased mine from an earlier run and don’t really want to have a hand grenade issue

[@LukeBBA]

Check out my disassembly video at 5:35 and you'll see the differences - at 00:00 of this video zoom in/fullscreen and you'll see half of the same image

[@jameslyons1978]

I can send you one of our hoa adapters for review if you fancy?

[@LukeBBA]

Haven't heard of any HPA adapters for the LevAR yet only existing valve taps, Where can I look at those? :)

[@BirdBuiltCustoms]

"Quad Smart Airsfot" is the bucking 😅 quantum lol

[@LukeBBA]

@@BirdBuiltCustoms 4UAD is the company, 4UANTUM is how they list all their products :)

[@anonymousnoone77]

💪❤️👍

[@SoulThief21]

What do you think of the mrhop for heavy balls like 0.40?

[@LukeBBA]

@@SoulThief21 havent personally tried it myself, i was underwhelmed with it on .32s so cant imagine it would have handled .4s well

[@SoulThief21]

@@LukeBBA Ok, I'll try and comment on something, my idea is to build a maple leaf 6.02, mr hop and nub omega accompanied by a retroarms camera. When everything arrives, I'll tell you how it goes.

[@SoulThief21]

@@LukeBBA Hello friend, update, I already have everything installed, impact measured with a telemeter to a person at 85m with a power of 1.80j hpa, something needs to be adjusted but it looks very good, I would love to get the 4auntum rubber, I will write to you when I make more evidence. all the best

[@BecauseHYDE16]

Sell the o-rings in a kit

[@LukeBBA]

@@BecauseHYDE16 Ill look into it :)