G37 Headlights Halo Install Step by Step DIY!!!

In this video, I think I touched on everything you need to know regarding modifiying/retrofitting your g37 headlights.
Its a pretty detailed and in depth video covering each step I took to achieve these results.
----------------------------------AFFILLIATED LINKS---------------------------------------
Link to halo kit: lightingtrendz.com/collection...
Heat gun: amzn.to/3K1Zbm2
Butyl to reseal Headlights: amzn.to/3PuSvxL
Screwdriver: amzn.to/3dKdY8Y
Black Spray Paint: amzn.to/3K47ayU
Heavy Duty Clamps: amzn.to/3c2gTJo Used to hold light in place until butyl cools
Rotary tool Wired: amzn.to/3puot2I
Rotary Tool Cordless: amzn.to/3ptecnp
Diamond cutting wheel: amzn.to/3dGbecD
#retrofit #halos #demoneyes #g37

[@1BuildMedia]

In this video, I think I touched on everything you need to know regarding modifiying/retrofitting your g37 headlights. Its a pretty detailed and in depth video covering each step I took to achieve these results. -----------------------------------AFFILLIATED LINKS---------------------------------------- Link to halo kit: lightingtrendz.com/collections/infiniti-halo-kits Heat gun: amzn.to/3SpvO0x Butyl to reseal Headlights: amzn.to/3zVwTpJ Screwdriver: amzn.to/3PY7Zvr Black Spray Paint: amzn.to/3d78o01 Heavy Duty Clamps: amzn.to/3QjP3H2 Used to hold light in place until butyl cools Rotary tool Wired: amzn.to/3oOU66O Rotary Tool Cordless: amzn.to/3JqJgxn Diamond cutting wheel: amzn.to/3QjP3H2 #retrofit #halos #demoneyes #g37

[@lexaroonii]

how did you get the rubber piece in the back with to fit in with the two wires

[@trevortownsend5056]

Finally!!! Someone dropped the sauce on this install

[@RandyMagnetG4ZA]

Headlights looking crazy 🙌🏾🙌🏾🙌🏾

[@markus360s]

You must’ve read my mind I was just looking for a good install video for this . Lol 🔥🔥

[@mr.glitch9071]

Great video helps me understand the process a little bit more before I start the process

[@franco.2x930]

🔥🔥🔥 going to try this as soon as my new lights come in

[@fellafella_g3774]

Fire description🔥🔥

[@Gwrap.s]

Awesome video my guy well explained just liked & subscribe earned it👏🏼 keep up the good work.

[@1BuildMedia]

Awesome! Thank you!

[@ForeignDJ]

Just got a g37 last Thursday thanks for this vid🔥

[@1BuildMedia]

Enjoy it

[@luvwoo9056]

bro thank you

[@maxroyhill9218]

Good job great teaching

[@1BuildMedia]

Thank you!

[@876ixlifestyle]

🔥🔥🔥🔥🔥

[@raylindg1977]

To glue the LED strips can you use hot silicone? I would like do it with halo and RGB trips… yours lights are fireeee🔥🔥🔥🤙🏾

[@Breezyreef]

Thanks for this. Question...did you sand and/or primer the chrome housing before painting?

[@Cliff2live]

if i buy the halo kit does it come with all four halos or do i have to get multiple quanitity's

[@GeoffCourtney]

Could you use a heat gun to remove the lens?

[@larisasantos5536]

Did you reinstall the plastic piece that holds the ballast/ignitor cable ?

[@robertberki395]

Hi what size the angle eyes are ?

[@moulaylhoussinouflahi1177]

Good job bro 🔥 thanks Can u pls the links for parts to use ( halos …… )

[@1BuildMedia]

lightingtrendz.com customize search to your vehicle

[@DDotzDriveway]

Hey this was a good video but im hella confused on the wiring part and how you got the angel eyes to light up after you put them back onto the car any advice or tips

[@1BuildMedia]

Its been so long man i actually forgot. But, what I do remember is when you buy the halos you get a device that supplies power that needs to be connected to the battery.

[@christiancastro9086]

Hey the only thing i seen you missed/ skipped past in this video is how you did the wiring for the halos. once everything was sealed together what wires did u splice into. wiring management ect. if you can provide that it would be great

[@1BuildMedia]

No splicing I went straight to the battery for power then ran a line inside the cabin to a fuse that came on once the car is powered on

[@josealba378]

What’s the website for the halo light

[@sketchvert7290]

BRO!!! Sick G!!! Did you paint your grille? what spray paint did you use?

[@1BuildMedia]

Thanks. it was a high gloss black paint from behr. Two quotes then I got a gloss clear one over it

[@techfu582]

@@1BuildMedia How has it held up to road debris caused chips? I've been concerned that the clear coat won't stop the rocks/pebbles

[@getbakkvinny]

@@techfu582 just apply many heavy layers of clear coat

[@w3kt723]

You do you do builds for customers?

[@1BuildMedia]

I dont.

[@OrvilleMascoe]

Bredda which spray u use ?

[@1BuildMedia]

Links in description for paint and more

[@terrynstephens3447]

How did you wire the lights back in

[@terrynstephens3447]

Or how would you wire it to the parking lights

[@1BuildMedia]

I'm not sure what you mean

[@SebastianGarcia-us5gg]

Where did you buy the halo kit

[@1BuildMedia]

my apologies. I updated the description

[@fbahmed96]

How long did this take you ?

[@1BuildMedia]

About 2 hours a light

[@Stock.Foreign]

HEY AM HAVING A PROBELM TAKEN MY HEADLIGHT APART I HAVE PUT IT IN THE OVEN AND PUT IT ON 22O AND IT STILL DIDNT WANT TO COME APART AND I HAVE TRIDE 250 STILL DONT WANT TO COME APART EASY

[@1BuildMedia]

May have not used butyl in the first place to seal it

[@solar2575]

I see u have 2 front lips and I wanted to know what’s the first one

[@1BuildMedia]

Just one I got off ebay. Just search for g37 lip on there you will find it

[@solar2575]

thx@@1BuildMedia

[@euphoria4517]

I’m so confused ahaha

[@ambvshchargi3]

Which state yuh deh mi G? Mi wouldn’t mind if yuh could do mines for me dis BAD🫡

[@1BuildMedia]

Nah man mi nuh do dat

[@ambvshchargi3]

@@1BuildMedia mi Nuh understand yuh response…

[@1BuildMedia]

@@ambvshchargi3 I dont modify other ppl's headlights only for entertainment purposes.

[@ambvshchargi3]

@@1BuildMedia JAH Know! Respect said speed 🫡