G70 Velossa Tech Dual BIG MOUTH "LIT KIT" Ram Air Snorkels FULL INSTALL

[@velossatech113]

Thanks so much for making this! Absolutely loved watching this comprehensive video! Welcome to #TEAMVT!

[@moon1te]

Thank you, I love the product and very easy to do! Much better then OEM plus the led's just make it sexy. Now under lightning is easy with the controller already installed

[@velossatech113]

@@moon1te Thank you for the kind words! So happy to hear that!

[@wotblitzworldoftanks3943]

Great video!

[@michaelcolnick5802]

where are your chocks for the back tires?

[@moon1te]

I had them there. But I had goot brake anyways so it was all good

[@ARG70-y1z]

Just wondering, if you have to disconnect the battery before removing the bumper and cables and also do any of the bolt need to be torqued and the amount, also have you gotten any bigger debris in the airbox like maybe bugs or rocks? Thanks.

[@moon1te]

@arg70-y1z You don't necessarily have to disconnect the battery, although you can and it might be better is the real answer. But, I didn't and it was fine. The bolts don't have to get torqued down, they're mounting bolts so just make sure you tighten them securely with a bit of force. As far as bigger debris, no didn't notice anything, I've since swapped out my intakes and that's going to be on the upcoming video. But I didn't notice anything different as far as debris is concerned. Thanks for watching 🙏

[@benblauvelt9034]

Did you not need the ags simulator assembly in the kit?

[@moon1te]

That's not needed for the g70 and it wasn't in the kit.

[@kevinconnell8104]

You find intercooler to be worth it? Provide and performance increases?

[@moon1te]

The performance of the car does actually feel better. Car got a bit louder actually which was a surprise for me. So it's def doing something. More cold air=more power

[@moon1te]

I'm working on the Intercooler install video

[@ericschofner546]

Did you not trip a P0444 CEL for removing the Air Flap Valve? I tuned in to see how you went about avoiding that.

[@moon1te]

I didn't remove any valves for this installation. The only thing that was removed is the oem snorkels, and they were replaced by the velossa tech snorkels. There is no valve there. I also removed the shroud, but there were no valves there either. The shroud is just plastic housing. The P0444 CEL doesn't have anything to do with this installation on this particular car. The P0444 code is an EVAP issue. This installation has nothing to do with evaporative emissions. There's lots of videos on how to fix a P0444 CEL, so backtrack on what you did. Again, I didn't remove any valves or sensors with this installation. Anything removed was pieces of plastic. Hope this helps

[@hasanfadhil6404]

The sport prestige models come with active valves for the intakes, but I don't know if the launch edition does?

[@moon1te]

My intakes didn't have any valves, I have Takeda AFe intakes installed rn. Never got a check engine or any codes after the intake swap or the snorkles swap.

[@hasanfadhil6404]

@moon1te yeah, it's on the 24 and 25 models active shutters for the radiator. My 22 G70 SP don't have them, and my brother 22 Launch edition didn't have them either.

[@moon1te]

​@hasanfadhil6404 my '23 doesn't have it either. Why did they feel the need to put a valve on the intakes? Crazy, i didn't know this. Thank bro 💪...#velossatech should come up with a fix for this. I had a simple swap and plug and play.

[@giuseppedimarco4212]

Why not put the power button inside the car? You have to open and close the hood every time you want the Lit Kit on or off?

[@moon1te]

No, kit can stay on but you can control it with an app via Bluetooth. Whatever color and pattern you want, plus on and off. So I just leave the switch on

[@thechannelflow7840]

They give you plenty of wire, You can bring it into the cabin via the door you can stick the wire thru a gap in the fender and windshield

[@giuseppedimarco4212]

What year is yours mine is a 2024 2.5 and I installed the same one because they said it was compatible but I get an error because the shroud is out. The car knows the shroud sensors are not working because they are unplugged.

[@moon1te]

I have a 2023 3.3t. You have to check what you did. In my car, there are no sensors on the shroud. I didn't remove any sensors by doing this installation. The shroud is just a piece of plastic housing. The only purpose it serves is to direct air. No valves or sensors. Any sensor you removed, I suggest you put it back. Check my video thoroughly, and you'll see I never removed any sensors that I didn't put back. The only sensor I removed is the bumper sensors, but I plugged that back in when I reinstalled the bumper. Maybe that is your issue? Check your steps again and watch the video thoroughly. Hope this helps

[@giuseppedimarco4212]

@ we found out the 2024 is different than the 2023. Velossa Tech is making a new AGS simulator since it’s not compatible they are working on it now

[@moon1te]

@giuseppedimarco4212 I still don't get what these snorkels have to do with the AGS System? I don't remember messing with the AGS system when I installed them. Sorry to hear you're having issues

[@giuseppedimarco4212]

Where you guys located I need this done just got a 2024 G70

[@moon1te]

I'm located in NYC. I can get it done for you within 2hrs

[@giuseppedimarco2791]

@@moon1te how much $$$ I have the 2024 G70 2.5 AWD. I ordered the same kit as you. They said the 3.3 on is the same for my car

[@moon1te]

​@giuseppedimarco2791 I can do it for you for $200. It'll take me a couple of hours including taking off your bumper.

[@tommyc7434]

How much to come with kit and install? Im in Ridgewood

[@moon1te]

I would need you to already have the kit so that there's no confusion on which version you want to get. I don't work for velossa tech, I just know how to install them on the g70's. Ridgewood is an hour away from me so installation would be around $250-300