Fun Extras! This kit has a LOT of unused parts, including a full grenade gun from the full armor. Also, the beam javelin can attach to the wings if you use the FA forearm shield adapter (also included) and it still can attach to the DE hard points for the backpack. In half-transformed mode on the arms, it looks like a jet boosted beam bayonette for the shield, and is awesome... just leave the tail binders off, as they add WAY too much to the thickness of the bottom of the DE
@tensazangetsu80763 жыл бұрын
i still dont get how did u do this LMAO im talking abt the hyper beam javelin attaching on backpack
@Dakitty3 жыл бұрын
@@tensazangetsu8076 the backpack is very slightly modified from the FA unicorn, and the shield can be mounted from either the tail stabilizers or the joint between the shield and the DE add-on... but mounting it from the bottom on the backpack looks kinda silly, so you can replace that joint with the included FA joint for combining with the javelin/beam gattlings
@ilikegiantrobots17752 жыл бұрын
I will say, if you’re posing this on the ground, and you don’t have any stand on hand, I would say leave the tails on, they provide enough stability if you pose them correctly
@neroledoot2011 ай бұрын
So I gotta pull up the FA Unicorn's instructions to give my normal Unicorn a grenade gun
@Dakitty11 ай бұрын
@neroledoot20 I mean... it is like 4 parts on one runner with pretty clear sandwich construction, I would advise just going for it
@Ash.leighhh3 жыл бұрын
They really need to make RG IBO kits. Would fit PERFECTLY with the whole Idea that IBO’s mobile suits are literally frames.
@primes_3 жыл бұрын
Hell yes
@enriquemunoz64153 жыл бұрын
@@primes_ i would live to get an rg barbatos
@razrafz3 жыл бұрын
would love RG vidar, RG bael and RG lupus Rex
@enriquemunoz64153 жыл бұрын
But we all know what we really want rg neo zeong,mg neo zeong,and of course pg neo zeong
@Grunt00663 жыл бұрын
I know right. I'm still waiting on those! Why havent they done that already!?
@jackthrowroad86433 жыл бұрын
I think that part might be the top of the front skirt from the mg grandaddy 3.0
@lupinxiang1543 жыл бұрын
I would say the same thing as well.
@stsuhaila23 жыл бұрын
Either the RG or the MG 3.0. Missing one of mine lol
@HybrydATP643 жыл бұрын
I think it is
@shadeK.I.D3 жыл бұрын
Its not from granddaddy 3.0...i'm looking at mine and the parts don't look the same.
@Vloggmus3 жыл бұрын
The rg is based off of the 3.0 so probably the rg
@saeednaoki32593 жыл бұрын
4:54 that part belongs to front skirt of RX-78-2. I believe it’s the 3.0 MG
@soragranda3 жыл бұрын
You are right!, I lost and then find that same piece for that same kit once... It falls easy for some reason XD.
@Lockon55003 жыл бұрын
yeah the top part of the right skirt
@chill40753 жыл бұрын
Nice
@powiboi3 жыл бұрын
Glad to know i wasn't the only one that knew that piece
@kiramutoujaeger3 жыл бұрын
Looks like mg rx78-2 gundam ver.3.0
@Bobert20203 жыл бұрын
The true beast of possiblity. And the true destroyer of wallets. P-bandai rg unicorn gundam perfectibility Divine when?
@thelorebrarian22663 жыл бұрын
Ngl, I bought the full armor just to make it
@randyyeh75763 жыл бұрын
You forgot to add "gundam base only"
@agusaffandi23473 жыл бұрын
@@thelorebrarian2266 can you make it?
@GojiraFan-in9oo3 жыл бұрын
Wrong. The MGEX is the destroyer of wallets
@DCG9093 жыл бұрын
@@GojiraFan-in9oo Bandai PG phenex Narrative version. Combine it with a kosmos LED kit to also light up the wings and add delpi holo blue decals and a nameplate for the base. I had been eyeballing the non-narrative version for 3(?) years now, since the PG Unicorn is what got me into gunpla. Got the kit delivered last week, LED's are still in shipment and Delpi still needs to announce the NT version decals (they are working on those).
@GojiraFan-in9oo3 жыл бұрын
11:41 We all know it's Gundarium Tier. It's basically all of the RG Unicorns in 1 kit. A crap-ton of equipment should scare you from ranking this Gundarium tier.
@ocap31573 жыл бұрын
Idk how much gundam i have spent my money but I'm still buying this no matter what it takes
@twohands21523 жыл бұрын
@@ocap3157 check PBandai USA.
@ocap31573 жыл бұрын
@@twohands2152 nah, Japan would be more cheaper, I'm going to Japan this weekend because my dad is working there, so 1 week means 1 gundam
@gerogyzurkov22592 жыл бұрын
I mean crap ton equipment is a good thing cause it's good for custom making. That and you can make the regular unicorns if you don't want that much clutter on it
@seraph_dalgon_92163 жыл бұрын
Seeing all these Unicorn releases just reignites my burning desire for master grade Barbatos Lupus and Lupus Rex. Cuz if Bandai is willing to keep making new Unicorns, then why not just make two more Barbatos.
@kaiz18453 жыл бұрын
One, the MG Barbatos frame has a massive flaw imho. The actual shoulder/deltoid area of that kit has 0 mobility, which kills a *lot* of dynamic poses. That's especially bad if Bandai wants to carry that frame over to the Lupus and the Rex, since those are kits that really need to be able to throw good punches. Two, this point, I'm pretty sure that a big majority of the Gundam fanbase are just hardcore UC purists, and that whenever Bandai makes any kits/figures for designs that aren't strictly in line with the UC aesthetic, they secretly get mass death threats or something. Seriously, the only thing we get nowadays are UC stuff, and a $500 unplayable hand grenade with metal joints for Seed/00 every other year.
@maryleridaantonio1563 Жыл бұрын
Theres a mg lupus and lupus rex except its p-bandai AND you need he mg 4th form barbie
@trevorbowen17473 жыл бұрын
I'll wait for the mg ex edition to come out in 5 years. Lets be real, they are already planning for that stuff
@soragranda3 жыл бұрын
They are so troll that maybe is a premium Bandai expansion kit for the mgex, mgex² XD.
@MisterSouji3 жыл бұрын
Exact reason I decised to skip the PG Phenix. Just gonna wait for the MGEx.
@Angel-jd7df3 жыл бұрын
Hope we get a pg perfect
@joshuahensley93953 жыл бұрын
Are you proud of your self for obviously saying the obvious
@LeebThatsCanned3 жыл бұрын
Ill wait for a new mg virtue gundam
@ilikegiantrobots17753 жыл бұрын
Just built this today. I built the standard version a few months ago, so this went quicker than if I was first building it. This is now my second favorite model kit, the first is the MG Freedom 2.0. Both are some of the best kits I’ve ever built
@GojiraFan-in9oo3 жыл бұрын
4:54 I thought that gag was ded Anyway that piece is part of the MG Grandaddy Gundam 3.0's front skirting armor on the top side.
@shinjitama19723 жыл бұрын
lol yup your right what part it is....
@thatmotivatedchris67493 жыл бұрын
Of which ms though
@GojiraFan-in9oo3 жыл бұрын
@@thatmotivatedchris6749 The Gundam
@thatmotivatedchris67493 жыл бұрын
@@GojiraFan-in9oo no shit sherlock 😑 WHICH gundam ?
@leolied67663 жыл бұрын
@@thatmotivatedchris6749 Rx 78-2 3.0
@cheesemoon63193 жыл бұрын
"And the only that is BS right here is the fact that this never got a full release, both version P-Bandai" Thank you for speaking the truth.
@OtherMomo3 жыл бұрын
For anyone who doesn't know and is curious, VN = Vibrating Nail, BS = Beam Smartgun, DE = Defense Extention, XC = Xeno-Connect
@OtherMomo3 жыл бұрын
VN, BS, and DE are self explanatory but the XC is the thing on it and the Banshee Norn's back, it increases generator efficiency while also taping into the something something signal that lets people know a mobile suit is afoot, effectively extending its sight range making it know where tlu are before you know where it is. At closer range it can interfere with your own systems making it difficult to target.
@notbenithecow59203 жыл бұрын
for someone who loved the unicorns, buildlt three of RG unicorns (bandee, normal, and full armor) the best way to appreciate it is determine what mode you want to display your unicorn, and then lock it.. play around? yes, but not too much...
@mosheep3 жыл бұрын
This, lmao. I have the same line up (banshee yet to be build tho) and I haven't touched them since finishing them. Only when I'm rearranging my shelf, which isn't often, do I ever try to play with them again. They're pretty, and solidly built imo. But can be finicky to people that are heavy handed 🤷🏻♂️.
@notbenithecow59203 жыл бұрын
@@mosheep yep! totally agree, the normal and bandee dessine is the one to go if you want to play around.. the banshee is ok i guess, the backpack is little bit "menacing" to touch around.. lol that's why i keep my FA and normal unicorn in destroy mode and never bother to transform them.. its okay to change pose but no transform 🤣
@AmogusEpic3 жыл бұрын
I'm not one hundred percent sure which kit that piece is from, but It looks like the outside edge of a suits front-skirting. Maybe some GM variant?
@_champy3 жыл бұрын
looks like an MG crossbone front skirt part.
@AmogusEpic3 жыл бұрын
@@_champy Yeah, it does look a lot like either the MG or RG crossbone's now that you mention it. I just can't tell the grade since both are fairly small
@daniely89473 жыл бұрын
After others commented, verified on my own kit. Mg Rx-78-2 3.0. 100%
@matteste3 жыл бұрын
Reminds me a bot of the shoulder/torso area of the Barbatos.
@VolticWind3 жыл бұрын
5:14 that actually looks like part of the front or rear skirting armor from a RG
@dominicmorales44083 жыл бұрын
I think it’s part of the Master Grade Grand daddy Gundam.I recognize it cause it falls off all the time on my kit.It’s either the front skirting armor,or butt flap armor that goes around the square,yellow part...at least that’s what it looks like to me!
@noahshedd6101 Жыл бұрын
Agreed I recognize it the same way
@nathanielangelojancamacam7584Ай бұрын
I love that he didn't bother changing the pose at the end. Just spins endlessly. It means pose and never touch
@jsunn6791Ай бұрын
I just picked this kit up at the Gundam Base Tokyo! Great review and I can't wait to get started on it!
@gundampharmacist73483 жыл бұрын
Hey Mecha Gaikotsu, I got the RG Perfectibility myself; I can tell you that I haven't had any of the problems you had with the legs; while I think you might be onto something with transforming the MGEX, your history with the other Unicorns and my own build might also suggest you may have just not gotten a good one.
@EXADragaon3 жыл бұрын
With all the leftovers, you could pretty much build the 3 Unicorn in blue/white colors
@corwinharper87633 жыл бұрын
Man I love your vids bro and your simple way of explaining and adding humor just makes it so much easier to get into thanks again for the content. 💪🏽💪🏽💪🏽
@GrimzillaNemesis3 жыл бұрын
I HAVE BEEN WAITING FOR THIS EVER SINCE I FOUND YOUR CHANNEL
@IvanRojasX53 жыл бұрын
I want this one... But that price tag is something that is already giving me headaches... But at least is cheaper than the first edition of the Gundam Unicorn Blu-ray collection that came with this model kit.
@germanytiger44053 жыл бұрын
you know, you can get this one and just paint some Russian invisible ink on for your own desiring lights
@germanytiger44053 жыл бұрын
and the bandai standard parts really drive this kitty's style out, not even most paint works can achieve this much beauty. worth taking it with this price
@TenSoldierYT3 жыл бұрын
@@germanytiger4405 Russian invisible ink?
@germanytiger44053 жыл бұрын
@@TenSoldierYT just like these rumours you heard from you parents or sth, they invented some ink that can be deploy on any surfaces and react with special lights only, some suggest their effects last only couple hours
@germanytiger44053 жыл бұрын
@@TenSoldierYT Bruh thats old ass tales and you accuse me for assuming you as a child. isn't it okay to just ask formally?
@triplesix02093 жыл бұрын
Next version: Perfectibility Divine Unicorn Good job Bandai
@zainiikhwan94053 жыл бұрын
Rg Perfectibility: I won't disintegrate like my MG, come on pose me Mecha: I'm not worthy, I'm not worthy orz
@fishpop3 жыл бұрын
The Perfectibility is basically what i crated on Breaker 3 except mine had my colours. Although i used the Full Armor Unicorn's legs cos those had missile pods.
@ong13223 жыл бұрын
10:10 I love the way you say Riddhe and Banagher
@TokyoFilthy3 жыл бұрын
Been waiting for this review, so glad im here for it
@RoushFan17993 жыл бұрын
I so can’t wait for mine to eventually get to me from Side 7, I adore the Perfectibility and have held off on building an RG Unicorn just to have this as the one and only in my collection!
@michaelperry20573 жыл бұрын
I just had to get one and so far so good. I know it’s going to have some issues but it’s just sooooo awesome looking. I can’t wait to finish mine. Keep up the great videos.
@zetasann3 жыл бұрын
Pretty epic, will not lie.
@yienox42343 жыл бұрын
I just searched this up today looking for a review and what do you know here’s one
@karljavier5033 жыл бұрын
Just bought this weeks ago, and don't regret every cent I spent
@sharpshot1173 жыл бұрын
That part is from the real grade RX-78 skirt armor. I built that kit like, 3 days ago so it's still very clear in my mind
@tyronesaurus9103 жыл бұрын
Just a thought. I think it would be awesome to kitbash a Unicorn with different colored psycho fame taken from other Unicorn variants. i.e blue on the feet, green on the arms and red in the torso hehe
@sunrisespartan17653 жыл бұрын
that blue psycho frame is so beautiful
@lucaseichler31403 жыл бұрын
M8, the RG unicorn's base adapter can be attached to the stand using the square hole as well. The 3mm peg hole is more for the bases that don't have the octagonal peg, like the runnerless stand.
@abrahamambriz8923 жыл бұрын
Gundarium Tier in my opinion.
@eduardojimenez11843 жыл бұрын
As a owner of both the Blu-Ray release and the P-Bandai release, this is easily my favorite RG Unicorn
@eduardojimenez11843 жыл бұрын
@@Gunpla_shrimp no the P-Bandai has the same plastic colors as the regular release but the Blu-ray version has like a pearl finish to the whole kit and it’s in a more off white color than a regular release Unicorn. You’d be able to tell right away if it was the boy-ray just from that, and the box.
@eduardojimenez11843 жыл бұрын
@@Gunpla_shrimp it was a limited Japan only run that you had to pre-order to get, I think the whole set was like around $650, but I paid like $350 for the Perfectibility by itself on eBay
@shadowX503 жыл бұрын
I ordered mine on September but didnt get it until march. Just now finished it though. I plan on keeping mine as unicorn mode but idk how to put on the shield things with the backpack closed. probably isnt even possible. I still love it though haha.
@TheUltimizer.3 жыл бұрын
If this guy had a Black look with that Blue, I would buy it instantly
@scizorlord51263 жыл бұрын
Isn't that part from the MG Gundam 3.0's skirt?
@fused4813 жыл бұрын
I WANT THIS BUT I DONT NEED IT ACTUALLY I DONT WANT THIS I NEED THIS
@indigo_whiskey3 жыл бұрын
By the way, you don’t need that clear adapter part for attaching it to the stand. Most real grades have that same or similar grey connector part, and the large square hole can be used to attach directly to the large roundish peg on any action base arm. The smaller 3mm hole is for fixed position action bases like you might see with some high grades, the big square is for all other action bases 1 through 5
@bulostik073 жыл бұрын
4:56 from the front or rear skirt of Gundam Rx 78-2 3.0, Part num G1 or G2 (15)
@SirSaberDelux3 жыл бұрын
That Gundam Part is from the RX-78-2 Gundam 3.0 front skirt.
@riceboycruz13003 жыл бұрын
4:49 “BUT FIRST ITS THE RETURN OF” * Ad plays for Nintendo switch *
@TheUltimizer.3 жыл бұрын
5:19 To me it looks like a part from the RG Crossbone Gundam's waist, like that claw gimmick
@Repliforce10 ай бұрын
Despite definitely falling into the category of “heavy handed” (I broke one of the shoulder frame pieces :c) and nearly every experience I had with touching kit until very recently, especially with it as my first RG, being PAIN, I adore it. Well worth the 80-something dollars and sanity questioning, would buy RG again.
@nicemecha3 жыл бұрын
I'd love to see all the FA parts jammed on it too.
@gerogyzurkov22593 жыл бұрын
I wonder how unstable it'll be.
@neroidius69153 жыл бұрын
I think we can say that the Unicorn is the first mass produced Gundam
@delphinep4294 Жыл бұрын
A piece of the skirt armor of the RX-78-2 ? But in what grade🤔
@DarkROSkull0133 жыл бұрын
It's glorious. Lol. This would definitely be a grail on any collection.
@soshio_03 жыл бұрын
Mecha: With the same amount of care of the other kits Normal RG unicorn gundum: 🤣
@marcuschooi3 жыл бұрын
I was waiting for this for ages, I also planned to get this kit at Tokyo.
@twohands21523 жыл бұрын
This kit is going to be on sale on p-bandai USA starting August 26. Along with a metric f*ck-ton of other Gundam Base exclusives.
@CharloBagis3 жыл бұрын
I really like that blue psycho frame
@tfmsgderek88853 жыл бұрын
gundam part is the top of the front/rear skirt of the RX-78-2 possibly the MG and all we're missing is a PG and MGEX perfectibility
@LostInTheInternet933 жыл бұрын
You have run into my greatest gripe with the RG unicorn. It is beautiful, technology is amazing, and shelf presence is *chief kiss*. But I am terrified to touch it! It won't break on me, but you can not play with it. Also some of the joints have aged in the six years since I bought it. Hopefully with how popular the unicorn types are, we'll get a mark 2 with a locking system or something for the NTD mode
@yohandatuba39043 жыл бұрын
Wow more RG unicorn, you will never have enough unicorn :3 Edit: 5:10 it looks like the front or back skirting of the RG Gramps that is if you have it if not it could be the MG
@dmurdaseven99463 жыл бұрын
It's part of the skirt armor for the crossbone gundam for that mystery part, 95 perfect certain
@avicte38752 жыл бұрын
Great video! Keep it up! But you should try to bring this kit for everyone. I’m some one like you. I’m not exactly the most pastiest and I have big hands. But I absolutely love this kit.
@DanielBlazeRevolution3 жыл бұрын
Now this is the kit i been waiting for this review & as for the MG Unicorn Gundam Perfectibility, its not good enough unlike RG kits.
@Studio_OZKai3 жыл бұрын
Great timing, as my RG Perfectibility finally emerged from its 3-month dormancy in the Pacific (Though somehow ending up in New Jersey?????) and I should hopefully be receiving it in the coming week!
@chrisstick54033 жыл бұрын
Maybe that mystery part could be part of the skirt armor for the RG RX-78-2? Mine fell off all the time until I glued it. That's my best guess.
@UnversedXIII3 жыл бұрын
I'm so getting this kit. It'll look good with my FA Unicorn
@8BitJustice2 жыл бұрын
I kind of think the mystery Gunpla part *might* be one half of one of the weapon/accessory mounting clips from System Base 001, or at least it looks a lot like it.
@tylerstocker61893 жыл бұрын
Wasn't able to get the RG, but I did get the HG. It doesn't look as good but it doesn't fall apart all the time either.
@SebastianPargaPaints3 жыл бұрын
I think that part is from (I forget the name) the kind of classic original mascot gundam, it’s from the hip plate
@divinetrile67193 жыл бұрын
thank you for posting this awsome vid on my b day
@MeiMei_4043 жыл бұрын
That small part is from the MG Granddaddy 3.0 front (or back) skirt armor
@lancelicup50982 жыл бұрын
"This isn't really a kit for play. This is a kit for display" nice rhyme
@Centzaurion3 жыл бұрын
Unicorn gundam: exists Bandai: i can milk you
@mkevindhizky3 жыл бұрын
I think thats grandaddy 3.0 front skirt part
@burururampage75653 жыл бұрын
I absolutely love the Perfectability. With the Phenex Wings and Banshee Hands it looks amazing
@sgt_0blivion2452 жыл бұрын
5:06 Have you checked your RX-78-2 waist parts? It looks like the L piece from nearby the right yellow pad.
@jakebanares18343 жыл бұрын
5:00 Its from a front skirt of either mg or rg rx78 gundam
@alexbigman77593 жыл бұрын
I could be wrong but I think the loose Gundam part is part of the skirting armor for the mg rx 78 2 version 3.0
@akuma31583 жыл бұрын
The part is from the MG RX-78-2 3.0 It's the piece that goes on the upper parts of the frontal skirts, and that seems to be the right one
@UndocumentedEightSix3 жыл бұрын
PBandai was not ready for the traffic when this went live, in trying i wound up with 2 in cart and just hit order scared i would miss out. Been trying to sell my extra at retail price for about 3 months now and still no luck.
@takutoyamaguchi4363 жыл бұрын
Cool i will definetly buy the kit
@Raigurren3 жыл бұрын
Really hoping to snag this during the expo this week
@dr.bright62722 жыл бұрын
I just found a picture of the Plan B with parts of the "Full Armor." He's got 2 Beam Magnums.
@boeing01673 жыл бұрын
That Gundam part is the front skirting armour off of the RG or the MG 3.0 RX-78-2
@AJigsCorpuz3 жыл бұрын
Yeah.. I hope for MGEX Uni Perfectibility in near near sooner future..🥱😁
@spee9dy4573 жыл бұрын
I believe that missing part belongs to the MG RX-78-2 Ver. 3.0's skirting armour
@weaponwaffers35163 жыл бұрын
You probably won't see this since this review is kinda oldish now, but the stand adapter looks like you may be able to connect it with the square peg of the base instead of having to use another adapter on the base.
@ltcdr_43 жыл бұрын
White zaku part
@xander59953 жыл бұрын
I just ordered the Master grade extreme unicorn
@kennyolivieri60483 жыл бұрын
That gundam part looks like part of the MG RX-78-2 3.0's front skirt
@psycommu363 жыл бұрын
I am gonna cry in the corner for a sec before I watch this.
@haramberoth1173 жыл бұрын
ID rather have this in red ....or green as a TRUE full armor unicorn Finally I’m making this a thing and it looks great!
@jamogable3 жыл бұрын
Bandai: How do we make the Unicorn Perfect? Gundam Base: Yes!
@synx92113 жыл бұрын
That piece is from RX-78-2 3.0(front skirt or butt flap)
@jesseleanos12653 жыл бұрын
That spare piece looks like maybe the skirt claw part from the RG Crossbone gundam?
@Apollo-xs9zd10 ай бұрын
That part is from the crouch of a mg rx78 the 3rd version
@JordanFromJersey3 жыл бұрын
The part is from an RX-78, I think either the 3.0 or the RG(I couldn’t really tell the size from the clip. It’s part of the skirt armor; it sandwiches the yellow boxes(ammo?) on either the front or the back. Sorry I can’t be more specific.
@jonathanyap37703 жыл бұрын
I end getting HG version of this. Less articulation and no transformation but also less falling part. Still loving the RG Unicorn Gundam
@damonschuchardt38533 жыл бұрын
the gundam part is from the Rx-78-2 3.0's front or back skirt
@ostoggez74443 жыл бұрын
WHO'S THAT GUNDAM PART?!?!?! That Gunpla part looks like the skirt armor of the RX-78-2 3.0 kit.