Galaxy S10+ Screen Replacement | Repair Guide | Full display and frame replacement

[@HermanMartz]

is it easy to replace to the Wi-Fi antenna piece on this device?

[@TapticDigital]

@@HermanMartz it’s not bad, most antennas are built into the plastic midframe pieces and those are cheap. But replacing the WiFi module on the board is quite a bit harder

[@NuclearBomb-ow4zf]

DUDE HELP ME. I😭 One of the 3 Logic board Screws won't come out(volume button one) it is really stuck down and I ruined it trying to unscrew it so many times how do I take it out 😭😭😭

[@TapticDigital]

@@NuclearBomb-ow4zf use a small grinding tool to cut a straight line into the screw, then use a flathead screwdriver to extract. If that’s not possible, you’re going to need a precision extractor kit, and it isn’t going to be very fun.

[@NuclearBomb-ow4zf]

@TapticDigital it is not FUN at all 😭😭😭😭😭😭😭😭😭😭😭😭😭

[@NuclearBomb-ow4zf]

@@TapticDigital I have basically turned the Philips head shape hole into a Regular hole what do I do

[@davidschulmann2794]

Wait what is that glue thingie you use for the frame?

[@TapticDigital]

3M Tape Primer. It creates a rough surface for adhesive to stick to, gives it a very strong grip and sometimes allows the factory adhesive to be reused

[@davidschulmann2794]

@@TapticDigital What if I use liquid glue? Does it help in any way?

[@TapticDigital]

@@davidschulmann2794 bit risky. Some liquid adhesives can get under the screen and discolor or damage the display. I tend to stick with double sided tape as the most reliable. I've had great results from TESA black tape.

[@davidschulmann2794]

@@TapticDigital I should too ig, I use the T7000 and only had good results so far. Still, can you drop a link for the double sided tape?

[@TapticDigital]

@@davidschulmann2794 sure thing, I just added it to the bottom of the description for this video, I'd get a couple different sizes like 1mm-4mm

[@x-noobtheproducer]

i never use pry tools on there batterys this is what i do to take out battery easy use some dental floss get it behind battery and lightly floss out battery carefully

[@TapticDigital]

Really? Dental floss? I had never thought of that, but it makes sense! I may give that a try next and see how it works for me.

[@dragoslaur3962]

Just internal transfer,not frame replace

[@TapticDigital]

But it went in a new frame. A frame replacement is the same as an internals transfer, because either way the same board is in a different frame.

[@dragoslaur3962]

@@TapticDigital A frame replacemant is the fact when you remove the lcd from frame an put the same lcd on a new frame .period