🔧Galaxy S6 Edge Glass Only Replacement (FULL GUIDE) success

Hello friends 💜
My equipment:
◉Glass cutting wire: bit.ly/3GiwqkH
◉Heat plate (glass separator): bit.ly/3hNAe47
◉UV Lamp: bit.ly/3GiVLLw
◉Glass cutting machine: bit.ly/3PTnTaU
◉Glue remover: bit.ly/3Vid6YZ
◉Small autoclave (bubble remover): bit.ly/3hX7WUC
◉Big autoclave: bit.ly/3GdQTHj
◉360° Separator: bit.ly/3Gr6409
➥Our service official website: jerrymobile.pl
Join my page👍
/ jerrymobilepl
Subscribe for more videos 😎
Comment if You have a questions 😊
Thank You💜

[@pauly362]

I do not recommend using. Stanley blade like that (pushing it towards you or your finger or thumb). I must say your method (albeit very risky) shows you have great skills. So much can go wrong

[@xXxdiablo2xXx]

Thank you bro for your good video and links in the description I tried soon on my s7

[@elihappinesspie]

I just tried this. Got about 15% done, and... NOPE!! I quit! So I just bought a new LCD assembly off ebay. Just gonna replace the whole damn thing. To hell with this!!! Don't get me wrong - mad respect to Jerry mobile! You are a true pro!

[@danieltrindade214]

muito bom trabalho parabéns

[@javiervazquez5110]

hey did you remove all the components (like the camera the mic and all that) before putting on the new screen??

[@javiersureda3565]

muy bueno jerry con que lo la calentas? a que temperatura saludos desde argentina

[@fantomlion333]

good work thank y

[@yordanoyuela]

experience+hard work+good time can be done perfect

[@kmicrotechbedpatientrepair6706]

thank you very much

[@josycruz639]

ise el mismo procedimiento y me falla la pantalla le kite la lamina y en pedio n me agara el restp de la pantalla si me ayudas con eso

[@robertseabron1162]

Very meticulous removal and careful replacement. Awesome job. I am wondering why the back was removed? It didn't seem to affect the outer screen replacement, unless I missed something. This is only for my understanding, and I thank you for your time.

[@potatimamusa]

Cuz loca glue get dry only on visiable part of the screen, and on sensor and front camera hole. You need to clean that hole or you get dirty front camera and blocked sensor.

[@semmiluss]

скажите пожалуйста, если экранный модуль полностью разбит(тачскрин и защитный экран) то телефон при включении проявит себя какой нибудь мелодией или звуком ???

[@drangels11]

well done, next time use a little less glue than you could use some tape to fix the glass at the bottom and top. No loca in camera's and buttons as well. fist let the glue cover to the sides then gently push (or let settle) till it reaches the top and bottom. As soon as that happens put it under the uv-light. If you still have fluids onder the samsung logo it always can continue to seep into the camera etc. Maybe it can help. thanks for sharing

[@narsi23]

I saw all his flaws too. But can you tell me where exactly to put double-sided tape in the bottom? Its a relatively small space and dont if you cover the buttons wouldnt they not work properly? I already know you have to put a little piece on the top of the phone

[@potatimamusa]

@@narsi23 use uv flashlight so u can dry glue on top and in the corners first and you will not have liquid glue under the glass after u finish all work

[@artaalizadeh2439]

Nice job, is it possible to replace my cellphones glass? The glass's broken last night

[@elpidioventura9522]

Daaam like a boss lmao ey if it works it works

[@toptendawgbaybeeeeeee]

Aww man someone should make a vine out of these. Roflmfao homie😂🤣

[@patom3150]

hello jerry, im from Argentina! thanks for share this faboulus work, i have a problem maybe u can help me, i quit de glass without problem, but i had a lots of problems when i stick the new glass whit uv glue, the corners doesnt stick and i.culdnt finish the work, i.dont know.if is the glue or another think, do u have some.method to stick! thanks for u time!

[@Slipshot007]

Pato M let uv glue cure in the sun

[@melhoriptv]

Pato M e aí, irmão. Conseguiu trocar o vidro sem desmontar o aparelho todo ? quero fazer isso sozinho, aqui no Brasil é muito caro fazer a troca com um profissional, cobram o preço do LCD todo.

[@YEIMIY28]

Disculpa que te moleste. Sabes cambie la pantalla de mi samsung s6 edge, hice tal cual esta en el video pero tengo una duda aun no coloco el cristal de repuesto. La pantalla prende y anda perfectamente pero los botones de home no el del medio si no los de los costados, esos no me funcionan. Sera que cuando coloque el glass funcionaran???? Gracias

[@PerrosDeBox]

+Yeimi Yanet no amiga, de la caída es casi seguro que se desconecto el flex de esos botones, lo que puedes hacer es desarmarlo y verificar que el flex de dichos botones esté correctamente conectado, el glass no tiene nada que ver. Esa es mi opinión saludos :)

[@TheGrossMeta]

Does it have to be taken off in pieces like this?

[@Thelivelyone]

That looked frightening

[@OskarQsca]

co to za klej/żel/papa do fachu, co nakładasz pod nową szybke?

[@carloseduardomejia8455]

fuck this. Im paying to get this done proffesionaly.

[@Lswisdom77]

+Carlos Mejia ME TOO

[@ommanipadmehum7829]

Yeah, one of our 4 s7 Edge's screen shattered.. Paying some pros $100 to replace the glass. No way I am using a lighter and razor blade. This is lunacy.

[@kimathimuthuri4439]

+Fortunato Wilford where do they do it for $100? Every place I have tried is charging $250 and above.

[@duanemassey4560]

Kimathi Muthuri With that price, it'll be the full LCD assembly. straight forward swap over.

[@duanemassey4560]

Aloo Gobi hat off to the guy, these are a pig to do, but I would prefer using a heat gun, or minimum, a hair dryer to get more spread of heat. then use cutting wire. I used a hairdryer on my first ever Samsung, and bought a heat plate straight away. never seen a blow torch uses before!!!!!! 😲

[@nitol666]

te reperaturki to ty wystawiasz na eBayu bo na allegro ich nie widzę. a chciałbym kupić z polski

[@brianwilliams2687]

hi i buy a screen and it have the Adhesive tape i still have to put glue

[@GermanSaidSalazarDelgado]

hi friend; what is the probability of succes?.. i need to know too how much ml of cola cleaner i need? & how of glue... very good video

[@TheSilverSuperman]

Respect for doing this with a flame torch. Inmy opinion theres just too many flaws that ended up in your finished results.

[@fredob7207]

that flat sheet of metal or flat sheet prying tool that you have what is it and where did you get that I've been using something else and I'm running out of them you did not have that on your description

[@TheUltamatium]

+Fredo B its a razor blade

[@fredob7207]

+Max Derinskiy i dont believe that is a razor blade.... its as long a big as the phone and way to flexible to be that

[@fredob7207]

+Fredo B look at 15:33 sec thats what i want to know about

[@silva15422]

Polak zna się na rzeczy :D

[@MrPaffPaf]

i finish great tutorial but you need to be realy careful and patient but one question how to clean home button frpm uv gel

[@JerryMobilePL]

Thank You :) You have to use isporopanol to clean it

[@johnsherdy6799]

What is the tool you are using to head the glass called? and where can i buy this

[@JerryMobilePL]

+John Sherdy Please check "Gas burner" in video description :)

[@hamiddaone2227]

Lmfao 😂 that screen in the end looks more fuked then started with. Should have left it like it was.

[@MadeleineHenderson]

no it didn't, don't be a wanker mate

[@panjaca3169]

Czesc! Co to jest za folia, ktora zrywasz pod szybka? Polarizer?

[@JerryMobilePL]

Nie to nie jest polaryzator, jest to po prostu zwykła folia. Trzeba pytać producenta po co ona się tam znajduje :) Domyślam się że dla zwiększenia bezpieczeństwa wyświetlacza

[@picapaukrk]

+Jerry Mobile na wielu filmach używasz tego palnika Dremla, jak go oceniasz? Dlaczego wolisz to od jakiegoś np. hotaira?

[@JerryMobilePL]

Bardzo dobry palnik. Uzywam go poniewaz ze stacją jest więcej zamieszania. Palnik jest oczywiście bardziej poręczny i osiąga dużą temperaturę natychmiastowo. Lecz niestety z tym trzeba uzwazac, przytrzymamy zbyt dlugo w jednym punkcie i mamy plamy takie jak u mnie w niektorych filmach. Niemniej jednak palnik u mnie wygrywa z hotairem :)

[@picapaukrk]

+Jerry Mobile no właśnie ja też potrzebuje czegoś do napraw telefonów bo przewód hot-air czasami doprowadza do szału. Dziękuję za opinię i pozdrawiam!

[@TheLordMaslo]

czy klej ma pokryć tylko wyświetlacz czy górę i dół też ma skleić (czujniki góra i przyciski dotykowe i home na dole) Czy nie zaleje się głośnik ? Bo widzę ze tam klej wycieka przez głośnik

[@JerryMobilePL]

TheLordMaslo Tak wycieka, ale głośnik przed klejeniem został zdemontowany, więc po wyczyszczeniu nie będzie problemów z głośnikiem ;) Najlepiej będzie jeśli klej pokryje tylko wyświetlacz, ale trzeba z wyczuciem dopasować ilość kleju względem wielkości wyświetlacza.

[@TheLordMaslo]

widzę że w tym modelu nie dawałeś taśmy przy krawędziach jak w przypadku np. s7 edge i chyba s8. Czyli jeśli klej pokryje tylko wyświetlacz i np kawałek góry (zakładając tak pod głośnik) to to juz będzie juz ok? Nie będzie żadnego luzu ani szczeliny? A jeszcze jedno drobniutkie pytanko: to na filmiku demontujesz szybke żyletką czy to jest to ostrze plastikowe które można kupić na specjalnych aukcjach ? :)

[@JerryMobilePL]

TheLordMaslo Takie ostrze można kupić na allegro, jest to metalowy nożyk. Nie ma potrzeby klejenia taśmy po bokach, wystarczy mocno docisnąć i będzie w porządku

[@TheLordMaslo]

Ok, bardzo dziekuje

[@heara67]

hello friend, after take out the glass i got dead spots, what could be the problem?, thank you for your video

[@screenprotectorfactory]

+hear You can contact Amy. Whatsapp: [phone].

[@dontbeeztupid]

Ah, maybe you damaged the screen by doing all that crap to your phone??

[@Alex233xx]

Hey man, nice job. Do you know the success rate if done using this method?

[@nikolasantek6673]

+kAZASDJAZ KuZISSINAK 5%

[@Alex233xx]

+Nikola Santek How did you get that? Did you attempt this repair. Thanks for replying

[@JerryMobilePL]

about 80% my friend

[@nikolasantek6673]

I dont want to insult anybody work. I do glass only repair for 3 years now and i have tried once glass only on s6 edge and failed. By my opinion this solution is not for perfections.

[@robfassi3297]

+Nikola Santek yea it's impossible to get it done perfect

[@femerson781]

Un vrai,abroutis!!!!!!

[@AlexSatellite]

I did this with a lighter and super glue and it became into an iphone 7!!!!

[@herbeenc8042]

AlexSatellite HA!!

[@giodadulla7019]

because you fail so you need to replace it with ip 7

[@toptendawgbaybeeeeeee]

Lol lol lol I'm here for the comments😂🤣 2020 obviously

[@BGJUNIOR89]

do i have to unscrew the phone mandatory

[@melhoriptv]

Can I change the glass without dismantling the phone? My english is a working in progress, i'm brazilian 😃😃

[@JerryMobilePL]

Patrick Martins in theory You can, but front camera and sensors can take damaged by LOCA glue

[@manuelvalencia7517]

quedan marcar por el exceso de calor

[@angelarrua9692]

Amigo yo levanté el vidrio pero al terminar de levantar el táctil me funciona poco o nada... Saludos desde Paraguay

[@malikdanish1862]

Is glass ki price

[@alexanderhamilton9272]

Do you do this as a job?

[@vegardaspy8109]

+Alexander Hamilton no way

[@robfassi3297]

Did you burn the polorizer at the top?

[@JerryMobilePL]

Yes, it was my mistake.

[@robfassi3297]

+Jerry Mobile it's all good it's very impressive to fix a s6 edge glass only successful

[@abrahamarmenta8101]

Do I have to remove the foil?

[@JerryMobilePL]

+Abraham Armenta It is better to remove it, becouse after operation the screen will be more transparent :)

[@abrahamarmenta8101]

thanks for the info, good job there.

[@OlikMark]

real shit

[@AnyeongF91]

ROFL it's 2016 and people are still separating glass like this?

[@mq2747]

+Tanklar what do you mean? is there any other way to separate the glass?

[@toptendawgbaybeeeeeee]

It's 2020 now roflmao🤣😂

[@user-jb8ls2xg9u]

Какой клей?

[@Nyancat703]

loca glue, google it

[@sssr419]

подогрев четкий 😂😂😂надо было сразу его в костер чтоб наверняка 😂😂😂

[@papercut1987]

was it necessary to unscrew the phone?

[@JerryMobilePL]

Yes, becouse glue will go to camera and other sensors.

[@SaadAkbar100]

where is your shop..

[@screenprotectorfactory]

Hello, where are you? We are professional factory for LCD repair machine and parts. Welcome to contact us. Whatsapp: [phone] Email/Skype: [e-mail].

[@SaadAkbar100]

I am in a USA New Jersey and where is your shop

[@screenprotectorfactory]

We are in China shenzhen.

[@kifashte3ref966]

better to use a hot air not a fire gun cause in the end alote of Ripples in the screen

[@methushalfernando]

where can I get the glass bro?

[@JerryMobilePL]

there is a link in description :)

[@trealfa773]

The video link is fake...

[@JerryMobilePL]

Tre Alfa which link ?

[@matthewdavis2703]

the screen is permanently fixed to the phone? is this why you didn't take it apart?

[@christophercrawford2736]

The LCD is very fragile. You're almost guaranteed to break it when trying to separate it from the body. Also, the body provides some strength to the LCD in the glass removal process.

[@servismanaco9993]

Сразу надо было греть газосваркой) быстрей бы снял

[@cowsgonemadd3]

you left a big bubble at the top

[@JAYRAY00]

You didn't remove the laminate at the top and bottom of the screen, that's why you still had the Samsung logo there. You need to remove that so the new glass sits down properly. Why wouldn't you remove it...?Also, I would suggest you pop the bubble with a needle rather than squeezing it out, as you squeeze out some of the glue, and the glue becomes too thin. Also if you cure the glue whilst putting pressure on the screen, you can get; 1. yellowing of the glue 2. glue separation 3. LCD breakage due to pressure, or releasing of pressure.The screen appears to have some warping to it, which I'm not sure if it's just the way the screen is, or if it's the polarizer damaged from the butane torch you've used to heat it up with.:-/

[@robfassi3297]

Isn't it hard to remove the laminate sheet without damaging the screen?

[@JAYRAY00]

Rob Fassi Yes

[@TheBagNStack]

Do not remove the film. just use a good solvent to remove the glue from film.

[@ogun9]

good job but not clean work . to much glue and u pressed on the glas when you put the glass on the glue its not good let work the glue by it self and can get better results

[@JerryMobilePL]

+Ogun Kutlu better put too much glue, than too little

[@ogun9]

+Jerry Mobile okay but litle glue is enough if you can adjust the exact dose i mean , much glue then glue go in front cam and home button and it have not a good looking thats what i mean friend .

[@JerryMobilePL]

+Ogun Kutlu have to be diligent, and clean the phone :)

[@jesuaantonio2747]

Wireless charging Lol XD

[@mustaphatayebi3366]

what its the probability for break the lcd for this method? thank you!

[@beastbestplay2015]

Mustapha Tayebi 99%

[@peak3590]

You put too much loca glue you only put a little line

[@blueeyes3509]

will you fix my mobile phone front glasss please preaty :(((((((((((((((

[@JerryMobilePL]

If You come to Poland, of course I can do this

[@blueeyes3509]

I m from Croatia from Dubrovnik bring your tools i we go to the beach . It is preaty to bee in Dubrovnik and then you can take me to Portland 😁

[@nikolasantek6673]

+Blue Eyes Dostavi ga k nama u servis budemo ti mi to napravili :)

[@blueeyes3509]

+Nikola Santek a đe ste vi ??? jer meni to treba promjenit ????

[@nikolasantek6673]

+Blue Eyes googlaj malo

[@mystupidreviews8736]

no sound? or is it just my computer?

[@wladtheninja]

no, its actually like this

[@JuarezDerrick]

this really sux

[@toptendawgbaybeeeeeee]

I'm here for the comments🤣😂

[@tonyaguilar2151]

hey , you just cant replace the glass, you have to do all that just to change the freaking glass?

[@billiehansen6217]

34:45 is that "success" ?? The screen under the glass is twisted as fuck!

[@gamingpractitionergp]

use a hairdryer much better

[@wladtheninja]

Why do you have to unscrew the phone? Couldnt you just glue the screen on the front without removing the back?

[@JerryMobilePL]

Becouse the LOCA glue can destroy the motherboard and the front camera.

[@wladtheninja]

Ou, okay. Than i have to remove the back too. But after I have removed it ... how it will get on the old place? Just heat it up again and it will sit or do I have to buy a special glue/tape?

[@kimbao164]

+WladHD buy the double side tape

[@arnotaljaard9672]

It does not have screws on the back or side, you have to get the glass off the back then screw it loose

[@wladtheninja]

I mean the main parts of the phone, after you have removed the glass (they have acutally screws) :D Didnt know that loca could destroy them .. i watched once a video from a guy without having the back removed. He just scraped the front glass and put a new on it.

[@stamzar1203]

Старое стекло мог бы и не снимать а клеить так)))

[@adalXD117]

quemaste la pantalla

[@Rikardo35]

ow shit its gonna taka for ever and you didnt even turned the phone off

[@tahacengiz536]

very amateur and craftsmanship of the faint, but still try and achievements you spent

[@jorgegomezfarelo6154]

la peor forma de dañar un costoso display...

[@AllisonMagicElite]

dude.. using medal tools against glass is not a brilliant idea..

[@apollo0075]

0 Ahnung

[@electronicsscienceandmotiv3238]

ok you burned the polariser

[@steveholtz420]

thank you

[@Rikardo35]

oh cmon ur doing it wrong dot use torch for that ur gonna melt something inside of ur phone man. and also you can remove the back glass and unscrew everything to seperate the glass thats the right way not with the knife

[@gk4302]

Your razor toll are rly dangerous

[@Rikardo35]

oh cmon ur doing it wrong dot use torch for that ur gonna melt something inside of ur phone man. and also you can remove the back glass and unscrew everything to seperate the glass thats the right way not with the knife. thats just breaking ur phone

[@ped078]

Success?! you burnt the lcd with that £3 mini blow torch in the top right of the lcd leaving a gold colored patch.

[@JerryMobilePL]

and ?? :D

[@ped078]

That's not a success, he's damaged the customers LCD.

[@JerryMobilePL]

all works my expert, customer was very happy and it is the most important :)

[@SuperHaulesbaules]

it looks like shit wrinkling screen under glass good job anyways

[@francisguidera972]

Nope... that's going in the bin..... all that effort for a second rate repair.

[@bobbystech]

unprofessional who do you think you are to replace it with a cigar light ha ha it wont work on all times

[@maciejl7981]

this is the dumbest method I've ever seen. This guy left oryginal laminate with oryginal OCA from underneath the broken glass and glue up new Glass with Loca so He ends up with x2 thicker display module and waves on screen like on ocean

[@vit198482]

Плохо что без звука

[@user-hx2qn8gf8k]

Ебать хорошо что без звука.. такую х.йню ещё и со звуком смотреть да ну его нах.й

[@massimoliccardi4095]

success? a me sembra un CESS

[@usalowe2123]

Samsung 👎

[@khanzadakhan7016]

stupid method lolx it's better than to pay for repair don't west own time lolx

[@khanzadakhan7016]

stupid method lolx it's better than to pay for repair don't west own time lolx