Galaxy Tab 3 8.0 - LCD Display, touch screen, Digitizer, Charging Port Replacement

Wi-Fi - SM-T310, 3G/LTE - SM-T311, SM-T315
How to disassemble / take apart the tablet to change / replace charging port, battery, display assembly (broken LCD display, touchscreen, glass digitizer) , etc.
Video chronology:
1:08 - micro SD card, SIM card
1:15 - back / battery cover / bezel
1:56 - battery connector
2:10 - micro USB, charging, dock connector with flex cable
2:56 - loudspeaker / ringers, front camera, audio jack connector, Volume / Power buttons ribbon cable, Wi-Fi antenna...
3:33 - battery
3:51 - LCD display flex cable connector, touch screen / digitizer flex cable connector
4:10 - display assembly (touch screen & LCD display) removal
7:31 - test the new spare part
8:00 - reassembling
iFixit manual with pictures:
www.ifixit.com...
• Galaxy Tab 3 8.0 - LCD Display, touch screen, Digitizer, Charging Port Replacement
• Galaxy Tab 3 8.0 - LCD...
• Galaxy A3 A5 A7 - 5 Tips & Tricks
• 5 Tips & Tricks - Gala...
• Samsung Galaxy S6 S5 S4 A7 A5 A3 - Two Different Hidden Test Menus:
• Samsung Galaxy A3 A5 A...
• Samsung GALAXY S4 - LCD Display & Touch screen Replacement
• Samsung GALAXY S4 - LC...
Music - "Fight the Sea" by Josh Woodward. Free download: joshwoodward.co...
Music - "Airplane Mode" by Josh Woodward. Free download: joshwoodward.co...
Music - "I Will Not Let You Let Me Down" by Josh Woodward. Free download: joshwoodward.co...
~-~~-~~~-~~-~
• ASUS Fonepad 7 Disasse...
~-~~-~~~-~~-~

[@nikkifinn1383]

Great demo....I have never been comfortable taking apart anything but I decided to at least give my DEAD T310 a try... Tried everything to get her to charge/turn on; it still doesn't work but at least I am less anxious about opening up something and perhaps repairing it myself....thanks....

[@alanandhilary]

Excellent tuition. I was a newbie until I followed this. Thanks.

[@MrZServices]

✌

[@ivantec-recife]

Muito bom o conteúdo amigo. E você escrevendo os nomes dos componentes ficou melhor ainda. Like para você, novo inscrito.

[@michab.7438]

Thank you so much. Great video.Top☺👍👍👍

[@MrZServices]

+Micha Boesing I thank you too!

[@dayleleigh]

Thank you so much for this video! I was able to repair my daughter's Galaxy Tab 3 8 with some confidence!!!

[@MrZServices]

+dayleleigh Bravo :)

[@Alsiraj2007]

Excellent thanks

[@dmarcuscosmic]

Hate the music but very useful and clearly shown. like your heat gun, what type is that?

[@Sal-75-2]

thanks! good video.

[@salihi557]

Nice video it's look so easy my question where do I get only display Glas mine is broken but everything else is working fine where do I get the spare part for galaxy tab 3 8 inch SM T 310 model thx.

[@myherpesitch7763]

good video. had to watch it twice. thanks

[@aarozala]

thank you,so much,good job

[@MrZServices]

+A Arozal :)

[@phenixwars1]

Perfect video!! What size or type of adhesive tape would I need to buy if it's not good after removal? Thanks!

[@memininetythree5137]

thank you very much

[@MrZServices]

Memi Ninety Three :)

[@notdzul]

I just want to take the LCD from the tablet, the tablet is not working so I wanted to take it, can I?

[@Musaneter013]

does the new Display LCD screen it comes with a flex cable to connect on the motherboard? on the tab 3 sm-t210? my touch digitizer and LDC Screen broken and the cable from the screen to motherboard was also torn in it and it needs to be completely replaced is ordered parts but I'm not sure if it comes with it

[@MrTherage89]

nice ty man ;)

[@santhiya2532]

Great job

[@MrZServices]

+San Thiya Thanks!

[@kovada6817]

+ZFix my samsung galaxy tab4 is just like that Hun

[@mdzubairalam4070]

Kon sa model hai our kon sa year ka

[@trystaariana1617]

I broke a samsung galaxy tablet 4 10.1 Could you do a video on how to repair the same parts as you did in this video!?

[@bhushanpatil7365]

My tab 3 display is broken so i can replaced the display only and what is Display prize

[@aumthakore450]

Please help! I have a sm-t311 my screen glass is broken not the LCD how do I replace it? Do I Need loka glue? There is no video on you tube for sm-t311 help!

[@iiNekoMattyii]

Just replace the whole display otherwise you will have a shit repair

[@Ccrydr6911]

Same problem as the guy below has so what's the video he was talking about? Is there a video on reboot or system restore

[@MrZServices]

+Cliff Frost kzbin.info/www/bejne/opK2fp5_rqiGapo

[@pradyumnananduri9826]

+ZFix excellent video! support from India! do we lose our memory of the tab?

[@MrZServices]

Thank you. No, this does not affect the memory.

[@pradyumnananduri9826]

+ZFix thanks dude! you're the best!

[@MrZServices]

Pradyumna Nanduri I thank you too ッ

[@haryoktriyono3004]

how repair back bottom & option bottom not light samsung tab 3 8.0

[@kenpeua3890]

how do you fix the on off button ???

[@DeathstormUwU]

about how much did the parts cost

[@isaaccedillos5331]

where can i find all the screen parts you in this video?? same tablet just different color

[@MrZServices]

+Isaac Cedillos I buy parts from eBay and Amazon.

[@kiararogers5014]

If I replace the LCD screen, would the tablet reset and delete everything I had?

[@MrZServices]

+kiara rogers No, you will not lose any data.

[@goldenspartacus1937]

My tab 3 is cracked on the inside and I want to know if it is repairable. The screen is not cracked.

[@MrZServices]

+Justin Harrison The touch screen glass and the LCD are glued, if any of them is broken you have to change a full display assembly, touch screen + LCD, like in this video.

[@octaviosanchezgonzalez8288]

Cuánto te costó el display

[@fardeengamer3952]

the home button is pink

[@gkay2722]

Great detail. Question. My TAB3 screen stopped respondong to touch controls last week. I can see and hear the tablet working , but cannot access any screenn controls. I did the usual reboots, system wipes, replaced the digiter screen (twice), and reflashed the firmware using ODIN. Still no respoinse. Is it possible for the LCD to provide images but malfunction to touch controls? Any suggestions? Thanks

[@MrZServices]

+G Kilfoyle The touchscreen (digitizer) and the LCD display are glued but they are two different spare parts. About your problem. You have already gone through the display assembly replacement and reflashing the firmware. This means that the problem is in the motherboard. With a magnifying glass check the digitizer connector on the main board and the small elements around the connector. The lines from the connector goes directly to the CPU. Explain us the history of the problem, maybe this can help us for the diagnose.

[@gkay2722]

Hi. And thanks for the quick response. This is a TAB3 SM-217A for AT&T, but they are all similar. I bought the tab at a flea market but it had a cracked screen. I bought the digitizer screen and replaced it. All worked fine. Then last week the touch screen controls stopped working out of the blue. I didn't drop it, etc. It just stopped being responsive to touch. I had a pass code set but I could not enter anything to unlock it. The screen was there and fine, but locked ... waiting for a pass code. The screen rotates and I could hear emails arriving and notifications updating in the background. I just couldn't access touch controls. I tried the usual cold and warm boots by holding down the power key. No luck. I booted into bootloader mode and did a system wipe and factory reset. Nothing, except I lost all my settings. I thought it was the digitizer screen again, so I bought another - different supplier. This did not change anything. I still had no touch controls. Next I tried loading the factory image via ODIN 3.10 and still no luck. The ribbon cable for the digitizer screen seems well seated. I did not see anything else obvious. I disconnected the battery ribbon cable and it also seemed OK. Are there other cables or ideas you can suggest? Is it the LCD itself or a MB? I'm not sure what the expense or challenge is to swap those out but I don't want to spend too much more repairing an older tab. :-) Is there a way of porting into this device without using the touch screen? Thoughts?

[@MrZServices]

+G Kilfoyle The problem can be: 1. Software - factory reset or reflsh will fix the problem (you have already done this). 2. Touch screen - you have already tried another one (less likely to be defective). 3. MB problem, you can fix this only if the problem is with the connector or around it. You can not do anything more. I think the problem is with the board. You can use OTG adapter to connect a mouse: kzbin.info/www/bejne/gWGyfIqMepWqicU

[@blairlawson5092]

G KAY

[@Khalil.Ibrahim]

can i just ask you where do you live because i have the exactly same tablet as you and less damage but the glass is broken and i have lines and stuff on the display. i cant use the tablet but everything else is alright except for the display. i was wondering if i could send it in to you for repair?

[@MrZServices]

I'm in EU. if you pay transport will certainly be very expensive.

[@Khalil.Ibrahim]

can you tell me all the new tablet parts that you have used and all the tools that you have used

[@MrZServices]

The model in this video is SM-T310. - I replaced the Display assembly or Touch screen + LCD assembly. - The tools you can find like "plastic opening tools". The long black tools is plastic spudger. - Phillips screwdriver #00. - To warm the glass I use hot air station but for this job you can use hair dryer.

[@ms.scrawford5086]

i have a tab 4 8.0 tablet i cane hear when it start and when i touch the screen but its still black i have removed the battery before that i did a complet wipe of info now what should i do

[@MrZServices]

+Shalon Crawford Most likely you have a problem with the display. Do you have a warranty?

[@darkone9581]

sigh watching this on my broken inky screen my tablet still work but the ink is bad so watching this was interesting especially with a broke inky screen im still not 100% shure. i can even fix my own screen know any legit super good shops that can solve my issue that cheep but still 100% satisfaction garentien smh dont mind the spell errors cant see very well on this cracked inky screen. but advice be mutch appreciated thanks

[@SuperGeeunit]

Sm t310 and sm t315 the same?

[@MrZServices]

+tony ganley mobile repair SM-T310 is Wi-Fi only variant. SM-T311 and SM-T315 have SIM card slot for GSM voice communication. The disassembly procedure is almost the same About the display assembly, they look the same but in the list of vendors they are separately (SM-T310 and SM-T311/T315).

[@SuperGeeunit]

+ZFix thanks. Will a t310 Lcd screen work on a t315 (vice verser)

[@MrZServices]

+tony ganley mobile repair I've never tried it. Better, order this part just for your model or ask the supplier.

[@jemersonhidalgo8901]

the touch controls of my tab3 are not responding. what should i do?

[@MrZServices]

+Jemerson Hidalgo First try a factory reset (to be sure there are not a SW problem). Of course safe you important data first. Next, disassemble the tablet and reconnect the touch screen flex cable. Finally, if the first two steps are not helpful, you have to change the display assembly - touch screen & LCD, because they are glued.

[@Ccrydr6911]

I lost my touch digitizer

[@ms.scrawford5086]

was told that they don't fix the screen only tec problems so im left to fix it on my own

[@MrZServices]

+Shalon Crawford You can try to reconnect the display flex cable, otherwise you have to replace the display assembly (LCD display + touch screen module).

[@darkone9581]

well my tablet bleeding black this sucks ass

[@notdzul]

dafuq

[@خالدالحربي-د5ش1م]

صميم