Galvo Laser Showdown xTool F1 VS Laser Pecker 4

  Рет қаралды 24,638

Velf Creations

Velf Creations

Күн бұрын

Пікірлер: 28
@FoiledDuck
@FoiledDuck Жыл бұрын
Great Video ! F1 is my choice =)
@myp0h
@myp0h 5 ай бұрын
F1 tools looks like the winner for me.
@CowsGoMonkey
@CowsGoMonkey Жыл бұрын
Laserpecker shills/backers seem to be mad that the F1 is so much better for not much more with a marginally smaller work area. I don't own the LP4 but I have used my friends LP4 and compared it with the F1 myself and him. We came to the same conclusion. I'm not a xtool fanboi. I just know that the LP4 is a terrible value, although the rotary is nice when it works. F1 extension is also way better. A new LP4 shouldn't even be a choice for a galvo laser, when you have the F1 and Fiber lasers. LP4 for a few hundred cause someone regretted their purchase? Sure it'd be a nice kit, but not brand new. Appreciate your videos!
@cynthiasymons
@cynthiasymons Жыл бұрын
There are a couple of good videos now that show how to easily raise the LP4 with the shield on and lower it to the desired position quickly using the app, making it much less of a hassle to position materials. It didn’t seem to me that this was a really fair comparison…I had the sense that you had worked more with the Xtool, and that you were more certain of its settings too. I wouldn’t have assumed that the same settings would work for both lasers on a first try.
@VelfCreations
@VelfCreations Жыл бұрын
Thank you for the comment, to be clear we didn’t use the exact same settings, we mention this in the video that our goal was to get the same look. F1 was faster when achieving the same look as the LP4. Even though moving the shield up and down with the app works it still not as convenient as the F1 and there will always be a gap on the bottom.
@VelfCreations
@VelfCreations Жыл бұрын
You are right that we had more experience with the F1 that’s why we mentioned that in the video as well, that we have been using the F1 for a month and this was our first video with the LP4. Again both machines achieved the same look but at the end it all came down to speed and convenience for us. Our experience may not be the same as others 😊
@vasko691
@vasko691 5 ай бұрын
Now I know what to buy... Thx a lot! It will be F1.
@karljolley8346
@karljolley8346 Жыл бұрын
Hmm... could the LaserPecker rotary be used with the F1? wonder what the compatibles are... Thanks for this comparison, I have been wondering this for a while...
@VelfCreations
@VelfCreations Жыл бұрын
Oh that’s an interesting thought, by default it wouldn’t work because the connection for the F1 is not a usb-c but we will do some investigating and let you know
@enzoferrarri9756
@enzoferrarri9756 Жыл бұрын
Hello thks Tell me.pls what spray do you use for color the watch band? Thks regard
@VelfCreations
@VelfCreations Жыл бұрын
Hi 👋 It’s not a spray, these can be purchased from xtools site, they have a black coating with the colored layer underneath
@FunPHYSICZ
@FunPHYSICZ Жыл бұрын
Very good review. Very bad obnoxious background music
@VelfCreations
@VelfCreations Жыл бұрын
Thank you and we know 😅 First full video problems but we are always learning
@PharaohsCave
@PharaohsCave 10 ай бұрын
nice video :) well done but from the start on it really looked like the f1 was winning 👍 why didn’t you do some cutting with both and see who is more accurate? maybe an idea for a future video 👍
@jyotwatchfashion872
@jyotwatchfashion872 7 ай бұрын
Price
@gilbertla852
@gilbertla852 Жыл бұрын
Stop the dam music, some areas are louder than him
@VelfCreations
@VelfCreations Жыл бұрын
Thanks for your feedback! That was one of our first videos so we are definitely still learning 😄
@playvision5667
@playvision5667 Жыл бұрын
can you please do a black plastic test?
@VelfCreations
@VelfCreations Жыл бұрын
Sure we can give it a try, can you give us an example of something you are looking to engrave? That will help us come up with settings that will be the most helpful to you
@playvision5667
@playvision5667 Жыл бұрын
@@VelfCreations I want to engrave my brand on the case of my electronic products. Which are all black, I don't know what material they are made of, just that it is black plastic.
@VelfCreations
@VelfCreations Жыл бұрын
Responded on the Facebook Group but also wanted to leave a comment here for the KZbin people 😄. I must mention that some plastics especially pvc can release very toxic fumes, so you will need to have really good ventilation or even better just laser engrave outside. I probably won’t make a video for that reason, people get really mad when I post plastic laser engraving haha. But if you do want to give it a try I have marked black PLA from a 3d printer with these settings. IR laser Power: 100 Speed: 800 Lines Per Cm: 300. This creates a white permanent mark. I don’t think the blue light laser would give you a deep engrave it will probably just melt black plastic.
@tamaratamarashvili9830
@tamaratamarashvili9830 5 ай бұрын
Please tell me anyone, without x tool may i can engrave gold ?
@근손실-l3t
@근손실-l3t 10 ай бұрын
Hello I'd like to purchase F1 product cat identification tags for business purposes I'm thinking about the output Is it okay to use wood, metal materials, plastic, and acrylic (I'm going to imprint on the size of a coin)
@josephKEOarthur
@josephKEOarthur 11 ай бұрын
robot voice?
@VelfCreations
@VelfCreations 11 ай бұрын
Yeah! Haha from elevenlabs. I’m not blessed with a good narration voice 😂
@josephKEOarthur
@josephKEOarthur 11 ай бұрын
keep on keeping on bro. good stuff@@VelfCreations
@_SHRDD_
@_SHRDD_ Жыл бұрын
1500 Bugs for an Diode Laser 🤣🤣🤣🤣
@VelfCreations
@VelfCreations Жыл бұрын
It may not be for everyone 😄
Solve Laser Scorching without Masking or Sanding
12:46
Asher DIY
Рет қаралды 68 М.
xTool F1 Guide: Avoid These Issues, Mistakes, and Misconceptions
8:06
Quilt Challenge, No Skills, Just Luck#Funnyfamily #Partygames #Funny
00:32
Family Games Media
Рет қаралды 52 МЛН
كم بصير عمركم عام ٢٠٢٥😍 #shorts #hasanandnour
00:27
hasan and nour shorts
Рет қаралды 12 МЛН
Quando A Diferença De Altura É Muito Grande 😲😂
00:12
Mari Maria
Рет қаралды 31 МЛН
LaserPecker 4 VS xTool F1 // The BEST Laser Engraver?
12:56
The Reformation Woodshop
Рет қаралды 58 М.
LASERPECKER 4 Laser Engraver Review! Commence Pecking!
9:53
Outside the Barn
Рет қаралды 23 М.
I Tried Starting A Laser Engraving Business In 7 Days
8:01
Jensen Tung
Рет қаралды 479 М.
xTool F1 Ultra's New Conveyor System Reviewed! How Accurate is it?
22:30
Bitner Built Woodworking
Рет қаралды 27 М.
LaserPecker 2, 3 & 4 Explained - Which Engraver Is Best For YOU?
15:29
Engrave on Metal Bracelets with the xTool F1 Laser
13:19
Making with Marilyn
Рет қаралды 5 М.
Watch This Before You Buy The xTool F1!
18:08
Ken Moon
Рет қаралды 91 М.
The XTOOL F1 Ultra Laser IS a Game Changer
20:59
James' Man Cave
Рет қаралды 72 М.
Amazing technology LaserPecker LP4!
13:00
Made by Madman
Рет қаралды 33 М.
Quilt Challenge, No Skills, Just Luck#Funnyfamily #Partygames #Funny
00:32
Family Games Media
Рет қаралды 52 МЛН