GAN 14 PRO - What changed?

BUY THE GAN 14 PRO Maglev:
speedcubeshop.com/collections...
CUBESCORE: bit.ly/cubescore
SHOPPING: speedcubeshop.com
SOCIALS:
Instagram: / speedcubeshopofficial
Discord: / discord
Twitch: www.speedcubeshop.com/twitch
Facebook: / speedcubeshop
Twitter: / speedcubeshop

[@SpeedCubeShopOfficial]

See how the GAN 14 PRO ranks against other cubes on CubeScore: bit.ly/cubescore

[@JbPerm-fv1gp]

I feel the reason it comes so loose out of the box is the same reason apple sets the computer angles at there stores so awkward. When you adjust the cube it makes you feel closer to the cube and like it’s completely made for you.

[@RealKevinPlays]

That's pretty cool

[@honguyenkhanhduy]

wtf

[@mikebozik]

Yeah, love the change up in format. These two are really close, it would take some time setting up and solving to really get to an answer... But I do like my cubes set up as loose/fast as possible.

[@Gnnnnnbnnn]

Actually, the tool for removing the caps is very useful. because , gancube that I have was damaged due to me pulling the caps too hard.

[@SpeedCubeShopOfficial]

It’s definitely useful! Just a tad inconvenient to have to have it nearby

[@VCuber047]

I didn't expect the cube to be loose out of the box, also I liked the new tool! It saves our fingernails! Awesome video

[@wilsonchow7681]

Such a nice review, keep going guys~

[@mastercuber3141]

I Preorder the Gan 14 maglev pro🎉😊

[@JustAnotherPerc]

I did too, like 2 weeks ago

[@ESLAMALJREW37]

Rich people problems😅

[@Olliefur11]

i love your shop🤩

[@MazezCubing]

ngl I just want the 5x5. NOTHING ELSE MATTERS

[@myweirdsecondchannelwithap9070]

I'm just getting back into cubing, wasn't the gan 5x5 supposed to be released in 2023?

[@MazezCubing]

@@myweirdsecondchannelwithap9070 back in 2021 pretty sure 🫣

[@CubingEmperor313]

Nice videos! My normal fourteen broke sadly.

[@TheNerdyCube]

Yup

[@xklamier]

I own and have used every GAN flagship released, and I’m one that actually enjoys the regular 14 quite a lot after getting used to it. (GAN’s are generally a looser and faster cube out of the box) …But the 14 Pro is the first time I thought I actually got a defective cube upon first turns due to how loose and uncontrollable it was. Even on the tightest setting available, I still feel it is too loose. This is coming from someone who likes fast cubes. I feel GAN needs to tune the range of tightness on their newer cubes. The stock feel out of box should be the loosest settings possible and only tighter all the way down from there.

[@maxim7685]

i like the new format and the video was really great. only thing i want to point out is the music was a little loud and at the very start was honestly quite annoying and seemed like someone was playing a piano for the first time. i feel like music at around 5:24 fits a bit better.

[@donkeycuber]

I used loose cube to get into OH and liked it a lot. But never ever for 3x3 cubing. That's crazy fast.

[@mattj7245]

Hey camren, I’m wondering how do you get replacement parts from speed cube shop?

[@ZafirAhmed-ge7bl]

Good cube!!

[@Ppretycos]

I was wondering if you had plans on have a Ghana interface on your shop

[@AColdCuber]

Wow the Gan 14 pro is amazing!

[@juzfun2965]

They uploaded this vid jus after i bought the gan 14 (normal)

[@JakobDam]

I have north of 5,000 solves on my GAN 14, which I bought right as it was launched. I made a review of it too - but I've never ever had it popping on me. I've tried a bunch of different settings/combinations, but it's probably due my turning style being lighter than the people who've had it popping...?

[@idkmybffjv]

Imagine if you spent 80 bucks on a Gan last year and have to pop your center caps off with your fingers like a peasant 🧐

[@TheNerdyCube]

Nice video quality

[@Cubingdash2020]

Yo I remember you from discord

[@Royaled_King]

whats next? Gan 14 Ballcore Leap? also gan 15?! what

[@FriskyPotat0]

I actually panicked when cameron started swivelling them around on the table like BRUH ur literally not gunna be able to tell them apart but then they mentioned centre caps 😮‍💨

[@WildWildWeasel]

So, for this upgrade (gave away my older cubes to my younger brother, sister and nephew since they showed interest and want to join me) money isn't an issue, so which Maglev variant should I go with? 12, 13 or 14? I'm more inclined towards the 14 Maglev Pro, but I wanted you guys' opinion 😅

[@user-rr4mu7kk2w]

I like super speedy cubes

[@javeywavey]

center cap dual functions as a pizza saver

[@flavored_1]

Gan 15 Pro Maglev Ball Core Enhanced Super Air 356 XSR ABC V2 When??? (only $4000)

[@Usuario01997]

Nah ball core would make the magnet strenght worse and the cube heaviee

[@ikecoldd2]

@@Usuario01997 Bro how bad is your sense of humor?

[@Justarandomguylol654]

Wow, that’s cheap!

[@TheMessyDeskxyz]

I really only almost had a pop once on the 14 (non pro) because I was turning really really badly and had new tensions/distance settings and was not used to that on top of the sloppy turning… Might skip the pro and wait for the 15 instead….

[@skellq4385]

I agree.

[@Frosty_edits.]

I feel fan just added small tables in center and made it longer and they added a new tool to we pay >:(

[@Ppretycos]

Hi speedcube

[@ffdf-uc1oh]

hello scs,i want to ask something, my cube's corner piece got broken.Could i buy only that corner piece?

[@SpeedCubeShopOfficial]

Check our help center to learn how to request parts 👍

[@TheRealNobey]

Gan 14 Pro ❌ iGan 14 Pro ✅

[@lucaxtshotting2378]

hah! because it's an interface! funny!

[@Ganball97]

this is one super 3x3

[@ayanami_ayn]

SCS please make a review video on the SoupTimmy YS3M 🙏 There's already a video review of YS3M, but not on the SoupTimmy version yet.

[@kashtynprince-catcheway]

Hey is my tornado v3 coming! lol😂

[@skellq4385]

Just to say. Be very careful with the V3. It has worse durability compared to gan and will break much easier. I have dropped my gan 13 from 4+ feet over 25 times. It is kinda damaged inside and has a decent amount of noticable scratches. However, nothing too bad. (I have a gan 14 now and i am being super careful with it, it has no scratches.) Tornado v3 corner magnet broke after dropping it from like 2 feet on accident once.

[@egecairli5324]

Whic one is better? Gan 14 or weilong wrm v10?

[@SpeedCubeShopOfficial]

Since cubes are based on preferences, there isn’t a “better” option. Personally, I would pick the WRM V10, but it all comes down to which one matches your turning style better. ~Noah

[@user-lb3go2tc8h]

Literally iphone of cubes, specially names

[@Cubinating]

Hi speedcubeshop! Can you give me tips on how to be sub 25? I use CFOP and know two look oll, 12 pll cases, and intuitive f2l

[@mattj7245]

I’m not speedcubeshop, but I think you should learn full pll. I’m almost sub 20, and I’m full pll, 2 look f2l, and not great f2l. In other words, practice practice practice. Hope this helps.

[@Cubinating]

@@mattj7245 thank you so much!! I’m in the process of learning full pll and oll!!

[@Cubinating]

@@mattj7245 also you’ll get sub 20 soon 😉

[@LowchinChinny]

learn full pll, make sure cross is 8 moves or less, insert f2l pairs into the back, try to have good recognition, don't rotate too much for f2l, every case can be solved with 1 rotation or less I think, do untimed solves where you try to figure out efficient ways to insert pairs (some of this stuff might be kinda advanced for sub 25 idk it's been a while since i was around there but this should work) hope this helps

[@Cubinating]

@@LowchinChinny thank you!

[@palstersecretroblox_yt1515]

Instead the Gan 15 Maglev they released Gan 14 Pro Maglev x-x

[@JoKachowthethird]

For those who bought the Gan 14, could we send you the old one for the 14 pro? Mine is in good condition still.

[@rishiandravi1993]

Please do a giveaway with the gan 14 pro

[@SpeedCubeShopOfficial]

We already are, check our website 👍

[@cubingpan]

the pro is made for yiheng wang and helped him to get a 3.47

[@Mafiooso686]

bruh I just bought the gan 14 pro and now I see this

[@namanienie123]

i feel like gan lost its shine at about the 12 or 13

[@gabrielarodriguezgutierrez8260]

Yooooooooooooo I saw you

[@siyabonganobela2859]

The moment I saw that adjustment tool I knew this was a joke

[@birdyflyer]

what changed: the usual... more magnets, more adjustment things, more money

[@OlgaFyodorova]

In this case, actually no. It's just the caps and the torpedoes.

[@Glevilee]

14 pro is cheaper

[@ManpreetKaur-rx5pc]

“More money”

[@ZACATAK77]

11:29 bro said the scramble was zesty 💀💀💀

[@ZACATAK77]

Nah how tf did y'all even find my comment, and why did you guys heart it💀💀💀

[@ClutchCps]

GAN 14 bro

[@rishiandravi1993]

I am in your discord server

[@CosmicStar3]

*_The price._*

[@OlgaFyodorova]

Man, to say the cube is too fast, you have to test it on the tightest spring/maglev setting, and that's 6 for Gan 14. You used what, 3 and 3? That's definitely really loose for Gan 14. I main a Gan 14, and I use 1 for distance (tightest) and 4 for maglev, sometimes 5. It's fast but controllable enough for me. It doesn't pop on 1 or 2, at least with my turning, but at distance 4-6 it does. I don't really recommend the Gan 14 because for such a price a cube must be flawless. Even though I main one, I can't say it's worth the price - for me, it's marginally better than, say, the RS3M v5 BC, but the price is a few times higher. I don't recommend upgrading to the Pro unless you really really really like the feel of the cube but absolutely want to use it on loose travel distance setting like 4 to 6. And if you want to take advantage of the discounted price, choose Pro if you know you like loose distance, and choose the regular 14 if you know you can turn pretty accurately and can enjoy a Gan cube on pretty tight distance. In any case, Gan cubes aren't the most forgiving, and if you want a really forgiving cube, rather get a Moyu.

[@SpeedCubeShopOfficial]

I see your point but comparing to the same settings on the GAN 14 it was surprising how much faster the PRO is.

[@OlgaFyodorova]

@@SpeedCubeShopOfficial My point is, if it's reasonable speed at maglev setting 5 or 6, then it's usable. And it will slow down with breaking in too. Plus lube.

[@user-sl8wd6pk1c]

Hellooooo

[@subzero.cuber47]

Money. The change was the amount of money it cost.

[@DRSmith-fz4qp]

As much as the Gan 14 is cool, the price is through the roof.

[@ainsleycailipan2005]

next: GAN 14 pro max

[@thesphyrth]

All this is telling me is that even Gan is running out of ideas to innovate. We are at the era of refinement.

[@maganda2009]

First. ❤ JOKE ONLY

[@yankeeromeoalpha]

😑

[@Cubedumpp]

Yoo

[@penguinyen645]

Interesting how you guys didnt really like it, since a lot of pros are actually switching to it like yiheng, matty, and ruihang just to name a few.

[@SpeedCubeShopOfficial]

It’s the same old story of preference. I have always preferred a more controllable feel and this cube is ridiculously fast! 💨

[@penguinyen645]

@@SpeedCubeShopOfficial fair

[@RoyalMidou]

Stopping kids from saying first

[@idekwhatoputhere]

thanks

[@RoyalMidou]

​@@idekwhatoputhere just realised no one tried saying first so ... useless comment but it's ok tho unjoy the video mate ❤

[@fire_orc383]

this is just as annoying, put an normal comment if you want to stop them

[@RoyalMidou]

​@@fire_orc383 that's why i did it ... to annoy those who write first 😅

[@mangocuber]

@@RoyalMidouFirst (I gotchu)

[@YOPPY-vt8mz]

Nah I’ll buy 3 v5s but I’m not buying that

[@user-pr2dx9iy1o]

Bruh gan make the same thing

[@TurkishKS]

34th

[@FrostMartin6854]

6th

[@poopkhan3178]

First

[@RoyalMidou]

Late by 5min 😂

[@poopkhan3178]

Whatevs

[@CosmicStar3]

The price.