GAN 15 & Tornado V4 Unboxing + Review!

[@technicallycubing]

i now have a second channel where i upload solves (and anything random i feel like posting)! check it out if you're interested 🙏🙏🙏 www.youtube.com/@literallycubing

[@AveryHyena]

This is the earliest gan 15 batch before they fixed a bunch of problems. You can tell because the square center pieces come as default. The reason why the square center pieces are only as a bonus for the first batch and that the wingless centers are the ones now installed as default, is because they are not completely functional and can break pieces and causes a lot of catching. The square centers were going to be the default center pieces, but if you have the square centers installed and try to put an edge in, there is a risk of damaging and breaking the edge. Source: Steven from TheCubicle

[@Pitsenberg]

So they are shipping the cube with extra center pieces that can DAMAGE the cube? What?

[@technicallycubing]

i figured i got sent an earlier version of the gan 15 after seeing the overwhelmingly positive thecubicle review, so hoping the actual gan 15 is good!

[@CUBEert]

2:33 You earned a sub for using that J perm reference lol, also great video!

[@akashsreedharan]

woah youre finally back i haven't heard from you in months!

[@technicallycubing]

wow real!

[@abhinavpv.2010]

Woah! Comeback and face reveal!

[@technicallycubing]

❤️❤️❤️

[@NikolasKeramaris]

Maybe ask for another gan 15, this time with the updated mechanism fix. Great video! I just bought the v4 flagship and gan 15!

[@technicallycubing]

might try asking and will see if gan sends one over (though they probably won’t care enough AHAHAHA)

[@Delix-Bs]

The one i was looking for. Just got my tornado V4, and wanted to see if it was the better choice. Can u tell me which one is better overall the pioneer or the flagship, i got the pioneer but i think its a bit too fast

[@technicallycubing]

i personally prefer the flagship, but if find the pioneer version too slow for me so if you found the pioneer too fast i think you made the right choice!

[@Tj_Hay]

i think they got rid of the magnet adjustment for 2 reasons: 1. makes it cheaper like you said 2. the gan 12 sometimes had the magnets change on their own when turning so now its smoother and they wont change on their own now

[@technicallycubing]

makes sense

[@catseption5704]

wow! I haven't seen you in a while!!

[@technicallycubing]

oops it’s been a bit long

[@baldnacho17]

BRO IS FINALLY BACKKKK :D

[@technicallycubing]

YEAHHHHH

[@kewbing]

I think the lockups on the gan 15 might have something to do with the squared centers so maybe switching it would fix it.

[@AveryHyena]

Yes, this is the earliest batch where the square centers come default

[@RubiKubiK313]

You´re finally back!

[@technicallycubing]

glad to be!

[@NikolaTeslaEE]

I just have 2 questions. Regardless of release year or company: 1) What is the best performing cube of all time if money is no object? 2) What is the best performing cube of all time if on a budget? THANKS!!!

[@technicallycubing]

tough questions! these are very subjective based on personal preference, so what you find to be well-performing may be different from what i’d like, but i’ll give my own preference if that helps :) id say the wrm v9 maglev ballcore uv if price doesn’t matter, and the rs3m v5 spring tension if you’re an a tight budget

[@Sakluvleak]

Finally a new video after 9months🎉

[@technicallycubing]

oops took a bit too long

[@DcubesOfficial]

did you get this cube before thecubicle made their video on this? cause they said that the first batch gan gave them had some issues, so i don’t know if it’s that or if it is just bad

[@AveryHyena]

Yes, this is the earliest batch, you can tell because the square centers are the default

[@DcubesOfficial]

@@AveryHyena ah ok, that’s great cause they could’ve fixed some of the issues he had with the cube

[@technicallycubing]

yeah that’s my theory too, i saw thecubicle’s review and noticed some differences, so i’m hoping the actual gan 15 isn’t as bad as i made it out to be

[@DcubesOfficial]

@@technicallycubing yeah me too cause i made a vid asking for 100 likes and ill buy it and now it’s at 200 likes…

[@technicallycubing]

praying for your wallet 💸💸💸

[@ACE_Ethan]

I though I got a notification from literally cubing but it's actually technically cubing! nice.

[@陀螺瘋子Themadblader]

3:49 Wow! Great analogy

[@WinsonWin-yh9vu]

I was told from the designer that the monstergo cube is for babys, anti pop things and other stuff so make sure the babies wont eat the center cap

[@technicallycubing]

that makes so much more sense and is so frightening at the same time

[@WinsonWin-yh9vu]

@@technicallycubing u know, theres more chinese kids getting in cubing

[@infrences]

You might’ve accidentally made me more excited about the GAN 15 just because of how polarising it is. I’ll be having a lot of fun with the adjustment and tbh might finally have a cube to main over my WR M V9 (I’ve tried TV4 and it was pretty good and have a V10 which just has worse corner cutting and rougher turning and is overall not as spammable as a spring-swapped or even stock ballcore V9)

[@technicallycubing]

great to hear!

[@Keplan999]

Even tho you don’t recommend the GAN 15, at what settings would you recommend it and what type of lube should you apply? Cheers

[@technicallycubing]

i set mine to around the middle settings for tension and made it tighter for the spring compression and added angstrom (can’t remember exact settings)

[@Square-one123]

awesome background music at the beginning........................ (I played it last year lol)

[@technicallycubing]

yoo cool

[@Square-one123]

@@technicallycubing I also think you should learn OBL :)

[@technicallycubing]

@@Square-one123 i use obl

[@Square-one123]

@@technicallycubing wat I thought you didn't know

[@Puritans]

Nice review. Would you consider Gan 12 better than Tornado v4? TIA

[@technicallycubing]

thanks! i prefer the tornado

[@Puritans]

@@technicallycubing the Flagship or the Pioneer?

[@technicallycubing]

flagship fits me better; it’s faster and more forgiving

[@Puritans]

@@technicallycubing thanks will now order the TV4

[@rsyoutube285]

Yoo r u going to cool down sg comp 2024?

[@technicallycubing]

yes

[@Cuber_Z]

Bro is freaking BACK!

[@RaNdO123mCuBeR]

You are finally baaaaackkkk

[@technicallycubing]

!!!!

[@AshmauMY]

Did I just missed a Technically Cubing lore. Since when you started showing your face in videos?

[@technicallycubing]

just! this was technically a face reveal

[@mukundtechtips]

yo my favorite cuber is back and when did you start showing face in your vids

[@technicallycubing]

just did!

[@mukundtechtips]

@@technicallycubing oh

[@zeekutartheimmortal]

I know everyone hates on the cap remover, but for me, maybe it's because I'm older, but my fingernails suck and they are not strong at all. when I try to remove the tornado centercaps I either break off my nail, or it bends back. I have to use a damn screwdriver.

[@ducktordanny]

same for me, the tornado caps are just so annoying… no tool needed for the adjustment system, but to remove the caps, oh man

[@Rahul-Bollini]

for the gan 15 you should try doing a slower setup on it it will probably fix the overturning

[@technicallycubing]

yeah maybe, but i felt that it just corner cuts badly in general so i think it just doesn’t fit me

[@Rahul-Bollini]

@@technicallycubing yeah valid

[@jovanleee]

the goat is back!!!

[@CubicCube17]

great video :)

[@technicallycubing]

thanks my goat 🙏

[@manicraftgap]

High quality content

[@technicallycubing]

thanks!

[@White_facee]

thanks (:

[@SofyDefian]

what king of monster go is that mini cube? Do you know where I can get it? Thank you

[@technicallycubing]

after some digging online i believe it’s the MG Monster Go 352 M, but it only seems to be available on the Gan site

[@JustAnotherAsianCuber]

blud is gorgeous

[@technicallycubing]

💀

[@Nklclol]

I dont lnow if the center caps will break as my whole center so its not the cap. As I use the gan 13

[@JoeLinux2000]

Do you mean "Goated" or "Coated"? GOAT means "greatest of all time". Supposedly UV coating improves grip, but I don't know why.

[@technicallycubing]

okay

[@MicahTheis-2009]

He’s the guy

[@speedsolverjoshauuuu]

judging yiheng must have been the pinnacle of your life

[@technicallycubing]

not really it was more stressful if anything

[@speedsolverjoshauuuu]

HAHAHAHAHA

[@daltonyzj]

technically cubing

[@technicallycubing]

omg it’s the pbl guy i’m such a big fan

[@raunaksinha8485]

Best cube under 35 dollar?

[@technicallycubing]

i prefer the wrm v10 spring + ballcore over the tv4 for that price, but that cube is a bit polarizing, so i think most people would prefer the tv4

[@raunaksinha8485]

Can you compare tornado v4 flagship to moyu wrm v10 20 ball core spring version

[@technicallycubing]

the v10 is much faster, but the corner cuts on the tv4 feel softer and you don’t have to turn as aggressively

[@Shedding]

Should i get the gan 14 instead of the 15 for 20 dollars less?

[@technicallycubing]

i don’t think you should get either; they’re both too expensive and don’t perform well enough to justify the price

[@cubersquad]

HE'S BACK 🔥🔥

[@technicallycubing]

you guys next 🙏🙏🙏

[@cubersquad]

@@technicallycubing 💪💪

[@WildWildWeasel]

tbh the best gan was the 12 maglev, rest were just meh or uncontrollably fast

[@technicallycubing]

good point

[@ACE_Ethan]

nice.

[@RedJ_Cubes]

🔥 vid

[@Johnyboii]

WOOOOOOO :D

[@Kalensha22]

havent see you in a while

[@adriangd5040]

finally remembered his password also the audio quality is actually SO MCUH BETTER than your other videos thanks for fixing that

[@technicallycubing]

aww thanks! i got a wireless mic recently so glad to see it pay off

[@Anthony_Jiang]

Is he back for good?

[@technicallycubing]

potentiallylyly

[@hehehohohahahihihuhu]

yes Dvorak symphony haha

[@technicallycubing]

goated piece

[@nivcubing]

WHERE. IS. THE. CARDBOARD. BOX.

[@technicallycubing]

UHHHH

[@陀螺瘋子Themadblader]

11:07 to make it lighter and cheaper(69.99USD)

[@titanchicken3275]

Bye bye 👋

[@oxfordhuang6634]

Why is psk so hard?

[@technicallycubing]

idk man im scared of learning it

[@陀螺瘋子Themadblader]

15:25 Try the round centers

[@technicallycubing]

maybe if i ever get motivated to try it out again

[@陀螺瘋子Themadblader]

@@technicallycubing 🙏 please try it

[@im_lyzole]

bro finally upload 🙏

[@technicallycubing]

arif

[@im_lyzole]

@@technicallycubing cubing

[@AshmauMY]

lyz hi 🙏🙏🙏

[@im_lyzole]

@@AshmauMY hello 🙏🙏🙏

[@TheMessyDeskxyz]

Yeah I think the square center pieces are the culprit for the lockups. Would love to here your thoughts on the round center pieces. Ngl, I enjoyed this video a lot more than the few old box head videos… +1 sub. Look forward to more unboxing/cube comparison videos!

[@technicallycubing]

that might be the case, may try switching out the center piece sometime great to hear you like these sorts of videos! the box was getting annoying to deal with when filming AHAHAHA

[@TheMessyDeskxyz]

@@technicallycubing basing it on what I've seen on other ppl's reviews lah. Later versions ship with the round center piece as default. Still waiting for mine to arrive. Probably floating on the sea in a shipping container now... Hope it won't disappoint 😅

[@lamktvn]

bro u luk like vietnam or china tell me where r u from :v

[@technicallycubing]

im singaporean so you're close (shocker)

[@Megaminx197]

Cheese

[@technicallycubing]

cheese

[@Megaminx197]

@@technicallycubing cheese

[@GlitchyGreninja76]

#comebackjperm

[@technicallycubing]

please 😭

[@redpanda7256]

Hi , what school you from

[@technicallycubing]

the best one 🔥🔥🔥

[@redpanda7256]

@@technicallycubing Oh cool, RI or HCI

[@Miguellyy]

​@@redpanda7256both

[@technicallycubing]

id prefer not to give out personal information online for good reason

[@redpanda7256]

@@technicallycubing Sure

[@iloveclock]

hi

[@virajdhamejacuber]

hi

[@technicallycubing]

hi

[@akashsreedharan]

shrey!

[@21.DontMiss]

Go bald for 10k subs trust

[@technicallycubing]

AHAHAHAHA

[@elliottwilliamson2560]

Making a video about the tv4 when you havent even used to tv3 is lowkey pointless lol

[@technicallycubing]

bruh it doesn’t discount my ability to tell if a cube is worth getting 💀

[@elliottwilliamson2560]

@@technicallycubing i know i just thought it was funny and surprising. I was also wondering if its worth the upgrade and what the difference is with the piece design which was the main reason i clicked. Didnt mean to hate or anything

[@Deakytonk]

Face revael

[@technicallycubing]

!!!

[@Myselfforlife3117]

307th like

[@ihateclock]

face reveal!!!!

[@technicallycubing]

woah!!!!!