Gan ROBOT 🤖 356i Smart Cube Scrambler and Solver

You can pick up the Gan ROBOT at amzn.to/2mHAllf
You can get the Gan 356i here bit.ly/2m5bSWu. At the time of this video release it's on a mega sale.

[@oppickles1358]

I am dissapointed because they had an oppertunity to call it the Gandroid and they didnt.

[@cosmo114]

I was gonna learn Nb perm but i was like Na

[@bigbosspanda1976]

You were like sodium

[@Internetpilot]

For whatever reason, KZbin recommended I watch this again and wow...those first Gan Robots were SLOW! Just a few months later and the Gan Robot can do 5-sec solves.

[@coconutcubes5750]

Can u do a U move and see how it solves lol

[@lfctango1759]

Watch Tingman's vid, he does that SPOILER: It does a bunch of other moves

[@KhyraExodus]

It will just do a lot if other moves

[@coconutcubes5750]

I think that’s the only way I can ever beat the gan robot😂

[@raynamarcheva7547]

Cheat the system

[@hward2002]

Totally missed the bottom piece, and now it works. Thanks!

[@cookiecubing1235]

I have seen this from others but it’s really cool so I’ll check yours out too :D

[@trslightshoe3177]

Im not first Im not last But when Shawn uploads I click fast

[@lombre9149]

Rico Cubing you’re not original

[@trslightshoe3177]

@@lombre9149 This quote is like a knock knock joke, you dont have to be the creator to use it

[@M3ko2]

Be careful with the GAN i's internal pieces! You might end up hurting yourself 😥 Other than that, noice vid 👌

[@autumnleaf8907]

M3ko2 how?

[@gooja9966]

@@autumnleaf8907 Wondering the same thing, I have one myself but have no idea what that means lol

[@joshuacarroll1758]

Wth does that mean ... I picture some one solving the cube in bathtub and getting electrocution

[@wyattstevens8574]

​@@joshuacarroll1758They... aren't wired together: it's Bluetooth.

[@l0rdstrontium]

Can i scramble to a set position so can practice OLL for example?

[@luwang7501]

thanks, Shawn for uploading this video

[@x9x9x9x9x9]

im good. This is one of those "but why tho" products.

[@Goomba_Smash]

Because some of us hate always having to scramble our own cubes before solving.

[@ethanjonahjorge7994]

I was the one who asked about corner twist on insta!! Thanks for the response

[@theeatmebeatmelady8620]

What are those first two moves doing for it, that this is what it does to orient the cube??

[@ITz_Skittle]

I ordered a Gan 249 V2 M it’s coming tomorrow on speedcubeshop

[@middleclassjoe]

Let’s say I wanted to practice specifically OLL, can you make the robot scramble to a random OLL state, or even a single state randomly chosen from a user selected subset of OLL states? That would be super useful to me.

[@SpeedCubeReview]

The app currently does not do that.

[@Vrlet_E]

@@SpeedCubeReview what about now?

[@kijenasa]

@@Vrlet_E in the description on the amazon page it says "A PRODUCT OF FUTURE INTELLIGENCE: The cube can be recognized whatever direction it's been put in and Robot instantly give out best algorithm. Support dual cubes for OLL, PLL or specified scramble-practice." so I think it can?

[@Vrlet_E]

@@kijenasa thanks

[@hward2002]

You can start at any point on cfop now.

[@jtleon7086]

Does app give notation after robot solves? If not, it's seems to be only a scrambler. Can it scramble to a desired scramble? Meaning the same scramble for a tourney, then another scramble for next round. All contestants on equal playing field.

[@wyattstevens8574]

Yes, but you can just focus on the cube.

[@venkatstechtalk6595]

Can this robot scramble it to the expected position I want? I mean, I want it to scramble in such a way that it solves all bottom two layers and except the layer? So that I can practice repeatedly solving the top layer?

[@freddiericdelara8395]

I too want to know this...

[@AlfredSpeedcuber]

I’m excited for the GAN XS

[@SpeedCubeReview]

I should have it soon.

[@the1barbarian781]

SpeedCubeReview I’m looking forward too it!

[@simplyanimation3735]

what next gan 11 pro

[@AlfredSpeedcuber]

noam masas yes with built-in camera and timer that shows the reconstruction of the solve and available on any methods And online battle and Games

[@simplyanimation3735]

@@AlfredSpeedcuber lol

[@bryanang4449]

Speedcubereview, which 4 by 4 do you prefer. Aosu GTS2M, Valk 4 or Aosu WR M and which one is best for me. (I am sub 1 on 4 by 4)

[@SpeedCubeReview]

Any. I go over them in a comparison video. Of those I have actually used some other ones as well like the MeiLong M at competitions. Your times maze zero difference. I don’t know what would be best for “you” as that depends on what you prefer. Check my comparison from about a couple months ago.

[@bryanang4449]

Thanks for replying. I watched the comparison many times already a week ago and I decided that I was probably going to get the Cosmic Aosu GTS2M. Afterwards, I saw your unboxing of the Aosu WR M. In the video, you said that the Aosu WR M feels different from the Aosu GTS2M. But is it better?

[@oppickles1358]

Feliks zemdegs who?

Can somebody confirm whether if it can scramble a non-i cube like the 356 XS or not ? With the proper caps, of course

[@SpeedCubeReview]

yes. it can

@@SpeedCubeReview how do you do it in the app ? Every time I try algorithm scramble it asks for connection with gan i356

[@nxn8148]

We had a teaser from when you shot your eye out

[@MoneyMindedMotivation]

Is it working with android phones?

[@jyy2111]

Just got the robot, a GAN 356 M, replacement center caps to make the cube compatible with the robot. I can't figure out a way to make the robot scramble the cube, even though it connects just fine to the app. Anyone find a work around for this? My main and only goal is to have the robot randomly scramble for me.

[@SpeedCubeReview]

You have all 5 arms connected?

[@jyy2111]

@@SpeedCubeReview All 5 arms are connected. I can't find the function in the app to scramble the non-smart cube. The robot is connect and will twist arms a little when it connects. The app is in "robot mode." I go to Personal Training -> Algorithm Scramble. Options are to "connect gan356i" or "quickly solve non-smart cube". The second option wants you to take pictures of the faces of the cube. Is there a function that allows random scrambling of the non-smart cube? Thank you for your help

[@SpeedCubeReview]

There should be a function. I don't remember where. I will need to check it out later.

[@joshuacarroll1758]

@@SpeedCubeReview 8 months later...

[@vicasooo]

This is awesome! But honestly, a waste of money :(

[@joe-xw6yv]

I think it’s worth the money

[@joker4ever02]

Shh it might hear you.

[@orrknaan5459]

What app are you using

[@yogimew]

Scrambling is part of the practising experience.

[@SpeedCubeReview]

Not necessarily. It’s good to know how to scramble well, however, if you want to feel like a competition, receiving a scrambled puzzle can help create that experience. This could make the practice be more effective as it mimics the real experience.

[@yogimew]

@@SpeedCubeReview Point taken. Also, I am a little disappointed that it cannot scramble to something you could specified in the app. Imagine it can scramble to the inverted scramble during an FMC solve...

[@tomb2577]

No tensioning this time!

[@robertfrancismagician4210]

Do you know if you can program it into a certain pattern?

[@wyattstevens8574]

Just insert the pattern! Scooch Cubing has a couple dozen, for example.

[@robertfrancismagician4210]

@@wyattstevens8574 how though?

[@wyattstevens8574]

@@robertfrancismagician4210 Turn the cube!

[@robertfrancismagician4210]

@@wyattstevens8574 I mean can the machine do it. Put it in a certain pattern.

[@l.lawliet4651]

do you recommend the gan 251?

[@SpeedCubeReview]

Check Gan 251 Unboxing and First Impressions kzbin.info/www/bejne/pabXqniEgcSZq8k

[@dessnom4333]

i bet with the gan xs and gan x 2020 the caps are just for scrambling

[@AlfredSpeedcuber]

The GAN robot 🤖!

[@gamermakerhunter5449]

interesting, so we can solve cube only with 5 side turn? can you make reconstruction solve with only 5 side move ?

[@SpeedCubeReview]

Think of a solve where you don’t do D moves. That can often happen.

[@gamermakerhunter5449]

@@SpeedCubeReview oh thank for your explanation, so the robot solve cube upside down, like make cross on top than do the rest solve on bottom

[@SpeedCubeReview]

The robot does not solve the cross, or solve like F2L. I was using that as an explanation how much of time, we as cubers actually only turn 5 sides.

[@AbsoRuud76]

If it's symmetrical and slightly elongated oval shape, it's USB C, if it has a flat side with ridges and one rounded side, it's Micro USB. If it's ancient and outdated, it's most likely Mini USB.

[@SpeedCubeReview]

USB C

[@daphneblake7889]

How does it perform U moves?

[@SpeedCubeReview]

It does not

[@adilan8910]

What is the app called

[@DeactivatedCharcoal]

Sounds like a Camera autowinder at a press event.

[@paulbelcher2406]

What app do you use for this?

[@SpeedCubeReview]

CubeStation

[@kryt1kl]

what app do i need for the gan robot

[@SpeedCubeReview]

CubeStation

[@jonbraid2520]

Can't believe people are going nuts complaining that these don't work, when they are trying to use normal cubes with them 😂

[@SpeedCubeReview]

I have never seen that.

[@saveourpenguins283]

Cool

[@seannaeger9563]

how many cubes do you have?

[@SpeedCubeReview]

Check the most recent collection video

[@ryandriscoll7061]

11:56

[@forbidtuna]

And here's me with my old 90's rubix turns horrid (with the blocky bricks) but my pb is about 55 atm only just started cubing 2months ago

[@SpeedCubeReview]

Nice. Keep it up. Sub-20 times are doable on them. It’s good accuracy practice. :)

[@lombre9149]

Rubiks

[@theeatmebeatmelady8620]

@@SpeedCubeReview re above reply to farther above post from forbid... tuna (???). you are SO nice.. I on the other hand am a heathen with no filter and very little in the way of self control.

[@supercargamer8796]

OH MY GOD IT IS SO PAINFUL TO WATCH YOU FORGET THE FREAKING THING THAT GOES ON THE BOTTOM

[@kenjimusic7547]

Can i use it for a Gan 12?

[@SpeedCubeReview]

As long as you get the caps

[@bobateacuber7646]

Rip his eye :(

[@charliemarshall8440]

I need one I’ve been trying for years to complete my Rubik cube

[@windestruct]

rubik's*

[@chikengas4052]

Gan is like apple , the brand And the other ones...

[@Bacon5-0-c7i]

how many cubes do you need

[@SpeedCubeReview]

I've literally given hundreds away and done multiple charity drives. The companies keep making more and sending them to me ¯\_(ツ)_/¯ lol

[@candyspeed4038]

useful

[@incog8362]

Do you need gan robot 1 or 2

[@SpeedCubeReview]

You can use either

[@redonsh30]

Will the gan robot come with a cube

[@SpeedCubeReview]

All Bluetooth Gan cubes work with the robot.

[@bouwmr]

Perhaps I'm missing the obvious here, but how does it do U moves?

[@migueword9793]

It doesn't

[@SpeedCubeReview]

No need for U moves. It solves and scrambles with RLFB and D moves. It can match what the regular scramble is.

[@the1barbarian781]

SpeedCubeReview I saw a video of someone just do a U move and it did a sequence of moves the achieve the same thing

[@Etothetaui]

@@the1barbarian781 What is that sequence of moves?

[@the1barbarian781]

Etothetaui watch tingmans video on it

[@duxkhi1]

What if I have gan 356i 2 and 356i play?

[@SpeedCubeReview]

If the caps don't fit you can get replacement caps at some stores.

[@duxkhi1]

@@SpeedCubeReview thank you! Still thinking if it's worth it, it costs more than the cube now lol

[@SpeedCubeReview]

At the moment I would say it's not. I'm struggling to get it to work with the newer application at the moment too. It's fun to use but nothing that I think is worth it over a new puzzle.

[@viperx5709]

What app is that

[@SpeedCubeReview]

CubeStation is the Gan app

[@Ameolia8319]

I NEEED THIS

[@M.athematech]

So it doesn't do U moves???

[@SpeedCubeReview]

It doesn't need to

[@axeleratee]

I think wide d

[@M.athematech]

@@axeleratee But its not doing wide d moves??? Or did I miss that?

[@SpeedCubeReview]

It doesn't do wide moves, it solves and scrambles the cube without needing U moves.

[@axeleratee]

@@SpeedCubeReview but how? So all of the scrambles by it are missing a U move?

[@xcubing1853]

XD I can't even afford a Gans Rubik's cube

[@VR_Miata]

then get a GAN 356 RS and magnetize it(I like 4.0mm x 2.0mm N40 magnets)

[@x_alan_x]

I liked your beard

[@PabloGonzalez-jv4kd]

Try only doing u and u' moves

[@wasinee19]

อายุเท่าไหร่แล้วครับ

[@SpeedCubeReview]

เก่ามาก

[@underthetoilet3584]

Can you give me the name app plzzz;_;

[@SpeedCubeReview]

Cubestation

[@underthetoilet3584]

@@SpeedCubeReview Thank sir!

[@ITz_Skittle]

3

[@user-tr1cq3ro7f]

어더게샀어요

[@chikengas4052]

Gan app : Ready Go!

[@lucaanos]

12:55 WYSI

[@dosgos]

Reduces probability of muscle and tendon wear as you don't need to scramble.

[@flyvernon7]

Really? Haha

[@dosgos]

@@flyvernon7 sure. every day you would have no scrambles. so lower prob of injuries.

[@sanjaykrishna2953]

Next up by gan Icube

[@DagnyKight]

Just read the directions...

[@nikolanichovski1367]

2

[@Internetpilot]

These are hands-down the worst electronic devices I've ever owned. The robot keeps miss-turning generating an error in the app, resulting in having to solve the cube yourself and then have it try to rescramble. Or, my fav, is when it supposedly successfully scrambles, but then when you solve it, the app still thinks you haven't. The cube is the worst Gan cube yet it's the most expensive. It's just bad. Anyone on KZbin reviewing this is only saying even slightly good things about it because they received for free from Gan. If you buy it (like I did), you're not going to be happy. Thankfully, I bought both from Amazon and it was returned 24 hours later.

[@keithwaynejones]

why does my app not look like this

[@SpeedCubeReview]

The app has changed a few times

[@keithwaynejones]

@@SpeedCubeReview i got it figured out finally. took me a few

[@veebhushah9667]

I still don’t understand the point of this robot

[@yourcat36]

Hi

[@hazzanawarafik6100]

GAN iPhone

[@G88CUBER]

😂😂😂

[@tanoshikun]

俺日本人！

[@bored2028]

Second

[@lukahiggins8357]

Адой евомне

[@theeatmebeatmelady8620]

Also I have a Rubik's connected. Trying to get this thing and it's app to stop menstruating and just work with my cube is a nightmare. It's literally a nightmare. The whole scanning the sides thing is impossible bcuz the camera is going backwards so the direction your hands are moving the cube in don't translate to the screen at all I move the cube to the left and the screen shows the cube moving 5° north by northwest .... A huge part of me (don't say ass) wants to be told I'm a weirdo and it's simple all u gotta do is this and that.

[@Jay-sd9ye]

So it only works with the Gan smart cube... Lame So the robot is 200 bucks maybe less. Then the cube is 70or80 bucks on top of that. Hell no... Who had close to 300 bucks to spend on speed cubes..u know how much stuff I can get for just a100$ towards speedcubing. You have got to be crazy to waste money on this thing and that smart cube. Giiker does the same thing, and it's fine to solve with..