Garage Door Wont Close? 4 Reasons Why!

[@dawoman50]

A very clearly presented video that gave me the exact reason why the door wasn't closing. An easy fix and I didn't have to rely on a service call with a high fee. Thank you!!

[@whirlpoolbook6730]

Same here, life saver. Save me a trip to call a handyman

[@ggillaspy]

Good for you!!

[@goldar72]

I was getting frustrated after hrs fiddling with the darn thing and about to call a repairman who would've told me who knows. I was fooled because the sensor lights were on. But the light would blink right before it closed and go back up. So after watching your video I kept my eye on the sensors as the door was closing. Sure enough the side rail shaking on the left side caused the sensor rays to disconnect and caused the door to go back up. But you pointed me the right way anyway. I was at my wits end. What a blessing your video was. Thanks.

[@bigfreezy2517]

I called the garage door repair guy to come out. He said $85 just to come out. I looked at your channel. I was done in 30 seconds. Just cleaned the lenses. It had very little dust but it worked. thank you .

[@denisekocek6557]

Thank you SO much for making this video ! As a recently widowed elderly woman, I was able to fix my garage door closing problem without having to call an expensive repair person.

[@frigidh2o]

The trim at the top of my door partially detached from the frame and was catching the door about 80% down then it would go back up. I nailed the trim back into place and that fixed the problem. Thanks for the tips in the video too.

[@FdgIV99SpaceGhost]

This just happened to right now. Found this video while trying to find a solution myself. Thanks a lot for the video. Solved the issue instantly. 2 reasons why mine wouldn't work. A spider was just chilling on the right and also the was sensor pretty lose. Cleaned both of them and propped the right sensor now it works perfectly fine. Thanks again

[@MoreThanMaintenance]

Great job!

[@rguerrah]

Thank you so much, your solution worked, the sensor was loose. You saved me $150 that I would've had a pay for a service call. Much appreciate you posting this video!

[@rdongre]

I just fixed my garage door that would not close using the tips shown in this video, thank you so much!!

[@Billndebpa1]

Thank you.. dirty sensor ..working great !

[@emmanuelcastillo4801]

Hi

[@dottiegallivan5476]

Easy to understand and each issue is handled with precise ways to repair that particular problem. Wish I had seen this before spending lots of $$$ throughout the years on repairs that I could have done myself....”very well done” video! Thanks so much.

[@ryangraybeal8413]

Readjusting coordination, cleaning the lenses, and checking the wirings of the sensors solved my issue(s) thanks to what I learned in this video. Thank you very much! 🙌🏼

[@050larz]

Thanks for the video. I think the cleaning of the lenses did the trick for me! Just in case, I got down and checked my wires, shook the rails and all that. My wife now thinks I’m a legitimate handyman. I owe you, man!

[@MoreThanMaintenance]

😂 great job on the fix! 👍

[@aniyawiley279]

My garage wouldn't open or close without having tondo it manually. As soon as i wiped my finger across the lense (as this video suggests could be a reason) and pressed the button, it closed and opened... I thought it was probaby the chain but it was that the lense had dirt on it... This man knows his stuff!!! Thank you for this video!

[@bb816331]

I was about to file a home warranty claim, when I watched your vid and then went out and cleaned my sensor lenses. That fixed it! You saved me $75 and time. Thank you!

[@nelsonassociate1]

I just want to say thank you for such a clear and concise explanation. All other videos went off on a tangent. You were straight to the point!

[@jimelson5896]

Thanks! Today our door did just what you showed in the video. As instructed, checked wiring, cleaned the glass (did not know these existed) and made sure they aligned with each other. Presto, door works. Assume the lenses were dirty. Thanks

[@gkoury616]

Sam, thank you so much. I just cleaned the lenses on the sensors and the garage door closes and works as it normally does. As a person who is not "handy" I find your videos very informative and easy to follow.

[@gfotinakes316]

Thank you for a very complete look at potential problems.

[@nabeelkareem]

Why would someone press thumbs down for such an excellent video clip?

[@rosemarylamparella8319]

Thanks so much! I watched the first 1:30 and realized my problem. So satisfying to fix something yourself without having to call a repair service for $150. Much gratitude.

[@chaplainlaing]

Great video. One other issue I ran into; same problem, but different solution. The screws holding the rollers onto the door (and the braces for the door) were all loose. It caused the door to shake and prevented it from closing. Tightened the screws and the door closed just fine.

[@qwertyasdfgzxcvmko]

I told my mom this, but she never listens to me. I literally see it just hanging on

[@nakia.jpg.]

THANK YOU!!!!!! I took a chance to google my issue AFTER I booked an appointment with a local company. It was my sensors no aligning! Save myself some money, I would’ve been PISSED they did something soo simple. Lol!!!

[@BLACKREACTIONSOUNDCANADA]

Exactly what u said the sensor was hanging so wouldn’t close... all fixed and working.. thanks for the info!!

[@manthacoleman1119]

Excellent. I just fixed my door. With this video

[@tim8468]

This video was extremely helpful. My garage door shit the bed, or so I thought, then after this extremely helpful video I was able to fix it quickly. One of the best videos I found on KZbin thanks again.

[@josephcovey7298]

Thank you! Tried your suggestion with aligning the sensors and it worked! Appreciate it. It’s not often where one of these fix it videos actually is helpful.

[@renatagross5959]

Thank you for your Awesome videos. My BFF had a meltdown about her garage door when it didn’t want to close. Thank you for telling me some ways to help her out.

[@markmccauley9348]

An older door opener was intermittently not closing and I was getting frustrated with it. After watching your video, I cleaned and adjusted both safety sensors, verified steady LED lights on them, and now again have a working door opener - at least for now...

[@chriswate724]

I just followed this video and finally got my door to close. There were spider webs on both sensors. As soon as I cleared these the problem was solved. Thank you!

[@garagedoorrepairco3829]

Thank you for giving some good information on Garage Door Repair.

[@miz2626]

Thank you! I was able to fix my door after a week of problems, you made it easy!!!

[@Bivotar]

Thanks! Cleaning the lens did the trick, though it didn't look that dirty. I also unplugged the garage door box to reset it.

[@michaelcoghlan9196]

THANK YOU!!! Cleaned the sensors. Problem solved. I probably never would’ve thought of that, called a garage repair guy and been told I needed a new garage door or some expensive (and needless) repair.

[@kristinebailey2804]

Hard to believe but all it took to fix our garage door was to clean the lens on the sensors. My husband is pretty pleased with me and so am I. Thank you for uploading this video. Frustrating experiences: GONE.

[@faithchukwuma9143]

Thanks for this video. Just moved in to my house and my garage door misbehaved because I tried setting it up with remote. It couldn’t go down but with this video we were able to fix it.

[@Roboticdock]

Excellent instructions! Cleaning the sensors worked out perfectly!

[@waterone4436]

Exactly the problem! Please continue to educate us on the mechanics of our World!

[@AwayToKpax]

really amazingly helpful video cover all different potential causes all together, short and concise!

[@Praveen-SGS]

Thank you so much for your most comprehensive explanation. Tightening the sensors and cleaning the lenses did the trick. God bless!

[@downloadingemail2780]

To secure the premises.

[@techlucky8672]

Thanks bud ... not sure if that's gonna fix my door, but I just want to preemptively thank you for the vid. Thanks!

[@cann8035]

Thank you Sam!! I was able to fix my door all by myself! God bless you!

[@NadiaMyres]

Thank you! I was having trouble with a job we had to finished. I really appreciate it

[@kathyamador8488]

Thank you so much for your excellent video. I advised my husband and he fixed our door.

[@rogercollingwood2798]

Thank You!! After your video and rechecking the door it works fine. You saved me a service call.

[@RavinderSingh-hy7iz]

Thanks so much after watching your video I was able to close the garage door. The sensor was dirty. Thanks for the video.

[@jsun0514]

You made my day. Thanks for saving me a lot of headache and money

[@grea8437]

Very clear and concise video. Now I'll go and troubleshoot my garage door.

[@mikew9673]

Excellent video. one of my sensors was loose. It's back to work after fastened. Thanks!

[@1charlierivera]

You saved my day. I was on my way to the airport when all of the sudden the garage door did not want to close. This could not happened on another day but the day going to airport. I checked the sensors and they were very dirty. I cleaned them up and problem solved ......... thank you !!!!!!

[@aliciadebord3871]

Thank you for this video. My door wasn’t closing, after cleaning the sensors it closed. Excellent information.

[@warrenbellamy5356]

Best how to video I’ve seen yet! Thank you.

[@Buttachuck]

My sensor was loose and this video helped me realize that! Thanks a lot!

[@daisyli9915]

Wow very useful. I thought I’d have to hire someone but it’s really just so simple.

[@craigwilson5715]

Thanks! You just saved me a service visit. Dirty lens on the safety sensors kept the door from closing.

[@christycheng0916]

Thank you so much for your video!!! I couldn’t closed my garage door today and it worked after I cleaned the sensors!!! So glad I went to KZbin for solution.

[@daviddaniel2198]

Awesome man thank you for the vid! I had a leaf flapping in the breeze that was blocking my sensor!

[@MP-nj1qy]

It took me less than one minute to reattached the wire, and no you don’t even need to shut off the electricity. Thank you so much for saving me hundreds. 👍

[@mustafazion1737]

i realize it's kinda randomly asking but does anyone know of a good place to watch new series online?

[@abrahamrhys6269]

@Mustafa Zion I watch on flixzone. Just google for it =)

[@solomonshepard8531]

@Abraham Rhys Definitely, I've been watching on Flixzone for since march myself :)

[@mustafazion1737]

@Abraham Rhys thank you, I went there and it seems like a nice service :) I appreciate it!

[@abrahamrhys6269]

@Mustafa Zion no problem :)

[@HerrellFamily]

Thanks, I'm gonna check out all 4 reasons to see what could be the problem. We have a lot of snow against garage door and thought the eye might be frozen, but we'll see!

[@DangersGirl4Ev]

LIFE SAAAAVER!!! My mom and her husband left town and the garage door wasn’t closing and I panicked bc I thought I broke it 😨😨😨😨 but this was the problem!!

[@pirazup]

Sam is the truth! Thank you for this tips. Just moved to a new house and door was stuck when closing. Just figured that one of the sensors was hanging by a zip tie. Seems like vibration got the tie moving and the sensor was loose pointing to the ground. Got the sensor back in the right position with the zip tie and it is operating back again. I'll take a look to see if why there is no screws holding the sensor, like in the other side, to figure out a better solution to the issue.

[@osaze61]

Sensor alignment and cleaning glass worked. Thank you

[@petesessa2041]

My door would not close after a short start. Sure enough it was a dirty sensor and one of the eye's was slightly out of it's installed position, for some reason. I saved about $200. Thanks!

[@korithompson2977]

Thank you! After watching your video I was able to get my garage door to close.

[@maddier.c.5252]

Thank you! I thought I might have to call a repairman but I fixed the problem with your helpful video😊

[@justinejohnson7468]

Thank you for posting! I fixed my garage door for the first time.

[@diegosoto5166]

Thank you very much. The sensor was push down. I couldn't see the light. Fixed ✔️ garage door closed without problems.

[@dannyyang3979]

Holy crap you save me. I was trying to troubleshoot thinking the chain was too tight or too loose and lost all hope thinking i'm gonna buy a new motor and then i thought about youtube yes it was just a simple sensor that was loose thanks

[@raywylie4705]

Great Illustrations! Simple to follow. Was able to get garage door working on the third illustration. Wires got separated by a snow shovel resting on the wire nut.

[@dennisbuzzini5692]

I had to adjust my sensors slightly. Thank you great video

[@bernicepierre3921]

Thanks to you I fixed my garage door easily! Loose wire from sweeping around the sensor! Thanks!

[@MasterChiefSpartan117]

Thank you. This video really helped out. Turns out our garage wasn't closing because one of the sensors wasn't fastened and secured.

[@PremchandChandran7]

Thanks for video! Sensors alignment helped correct my garage door!

[@MFrittHolla]

You the man! Thank you! Lasers weren’t aligning!

[@johnathanjimenez6403]

Thank you so much for video. I was going to home depot to buy a new and so your video first and turn out to be a loose sensor. Thank you again

[@Mrleroyg1]

In just five minutes you helped me correct my garage door problem. Thank you very much.

[@basharsalim2201]

You saved me 200 $ thank you

[@hamidelau]

Thank you! I finally fixed my garage door.

[@tomhughes6055]

Sensor alignment was my problem. Thanks!

[@allanwright6014]

Thanks so much Sam. You reminded me how to fix my G.door and save $$$$$$$$$ ! ! ! Thanks aga8n !

[@CandiestoftheLands]

Thanks for this! I moved the sensor by mistake and didn’t realize this was an issue!

[@rohitnaval5589]

What if my door only closes when I hit and hold the wall switch? If I tap the switch, it tries to close for a second and then opens again. I have no problem opening the door.

[@vperez8769]

Excellent presentation, concise and to the point. My lenses were dirty due to recent garage floor scrapping, clean them, readjusted and voila - it work. Thanks

[@janeschubiger2726]

Easy to understand Adam very helpful

[@maunakeya7590]

Thank you so much this video help me fix my garage door.

[@dimanyc2004]

Thank you. You just saved me a lot of headache and some $$$ by teaching me to clean the sensors! :)

[@manojprabhakar13]

Thank you, resolved my garage door in few seconds after watching this video

[@trushino3983]

Thanks a lot man! My girl definitely hit her sensor multiple times and made it loose

[@juliecrutchfield6065]

This video literally saved the day. Thank you so much!

[@dennisconklin4914]

Exactly what was wrong and is now fixed. THANK YOU!

[@parthbrahmbhatt9099]

Cleaning the lens worked like a charm. Thank you very much.

[@MsRjakes]

THANK GOD FOR YOU AND THIS VIDEO!! YOU SAVED ME 🙌🏾🙌🏾🙌🏾🙌🏾🙌🏾🙌🏾

[@janishutcheon4135]

Thank you. Cleaning the sensors fixed my problem.

[@christinad2896]

Thank you for the video. I’ll try these things today

[@jenniedavis6299]

Just adjusted my sensor and my garage door closed!!!..Thank you soooooo much😃

[@paulrichesonkent845]

Thank you so much for this video, I just knew I was about to spend a fortune on a service call.

[@LynetteP150]

Thank you so much - very clear video that just let me troubleshoot and correct my sensor issues. Thank you!

[@jwright1980]

You saved me some money today. Thank you!!!

[@laipuna4076]

Thank you soooo much!!! I had same problem and I cleaned the lenses it closed!!

[@theresa6093]

Thank you! My sensors were out of line! 👍🏽

[@coreymartinez9339]

You’re a life saver! Just cleaned my sensors and it closed right up!

[@melissakhamchanh2725]

OMG thank you so much for this video, you saved me $300.My garage door is fixed. Whooo hoooo