Garage Door Wont Close? 4 Easy Fixes and Reasons Why the Garage Door Is Not Closing

So your garage door won't close? If you're garage door is not closing, it is a very common occurrence for a homeowner. When the garage door is not closing we usually just think something is in the way but this is not always the case. In this video I show you some of the most common issues and also how to easily fix them.
Replacement Sensors. Make sure sensors match your specific opener model.
Chamberlain Replacement Sensors: amzn.to/3hYDB3I
Genie Replacement Sensors: amzn.to/38w76ab
Linear Replacement Sensors: amzn.to/2XpgJkq

[@marktan7976]

You just saved me $$$. My wife was calling a repairman. I asked her to give me .a little time . I watch your channel and follow your directions. Boom!!! My wife give me a big big hug

[@kerryguttilla422]

I am so BEYOND grateful for this video. I can’t believe I fixed my garage 😂 it was a sensor that was loose and facing a different direction… I didn’t even KNOW those sensors were even there until this video. Thank you zillions for saving me a fortune that I definitely didn’t need to spend! Amazing

[@cyrilharris]

Thanks, I had a dirty lens problem

[@dianetorres6886]

Single mom, sensors were dirty and cleaned them. Worked like a charm! Thank you!!

[@MarcCopper]

Searched for how to fix my garage door and found this video. I found my sensors were not getting power all the time. Switched the configuration on both and BINGO it worked like a charm. Thanks for taking the time to put this out there. You were a big help to me.

[@triciat1025]

OMG!!! can't thank you enough for helping me fix my garage door issue. Mine was due to sensor wire being disconnected. I was so worried before I listened to your instructions. Advice was right on the money. I did it- thanks to you👍🏽

[@kirankalvagadda3075]

I had same issue, thank you very much.

[@denisewilliams858]

THANK YOU! THANK YOU! THANK YOU!! Coming across your video was a god send. My garage didn’t close all night I was terrified and watching your video help me fixed my door

[@kimberlysantana133]

Thank you so much for explaining and showing so clearly in a way I could understand. Because of you I can close my garage door. No more flickering lights and an easy close

[@patricia8630]

Thank you so much you saved the day. I hit my sensor and didn't know it. I was about to call someone until I found this video. I realigned my sensors and the light quit flashing. From the bottom of my heart ❤ I truly THANK YOU.

[@HowToHomeDIY]

Great! I am glad you were able to easily fix it! Thanks for the feedback!

[@bryanbonanno2196]

Thank you for getting straight to the point with your video and showing the common fixes. Good information for sure.

[@beverlymurphy4707]

Thank you so much. My garage door wouldn't close but you said to check the sensors I did and now it's working. You are awesome!😊 👍

[@user-we8rx5gw9q]

Well-done and helpful video! I've had to adjust the sensors on occasion when they had been bumped and misaligned, but was stumped when the door would open but not go down more than a couple of inches. After viewing your video I looked more closely at the wire connections to the sensors and discovered that 1 wire had come slightly loose but it was not readily apparent upon a casual visual inspection. After reconnecting it, the sensor lights came back on and the door closes properly again. I appreciate you taking the time to share your knowledge so that others can benefit from it. And your explanations and visual examples were clear and easy to follow. Thanks!

[@p92333]

Thank you. Watching your video just saved me about $100 service call. I discovered a wire had been pulled out of nut. Easy fix and now my garage door will close. Thanks again for providing this helpful advice.

[@kathleengallagher6955]

Thanks to you, I fixed my garage door opener all by myself. There was a broken wire, which I fixed. I appreciate your clear instructions.

[@HowToHomeDIY]

Awesome! Glad it was helpful and you were able to get it fixed!

[@BattleForTheHotel]

you look pretty Kathleen.

[@justyummy5468]

Hey, this video was so helpful. Your another garage door video was also awesome !! My garage door wasn’t closing down and i was always forcing it to close manually by pulling via handle. All other videos talked only about sensors and mine sensors were absolutely fine. All i did was adjusted closing, opening settings and increased closing force which you mentioned in your another video. Finally i was able to fix my long problem of my garage door !!! Big thanks to you, i am myself a youtuber but honestly you are doing such a great job !!! I am your new fan !!

[@HowToHomeDIY]

Awesome! I am glad one of the two videos helped you! Thank you very much for the feedback!

[@eatingoutloudasmr6878]

Just wanted to say- I’m a single, first time homeowner with not a lot of repair knowledge. After watching this video I was able to fix my door after adjusting the electrical wire in the sensor (the light was not on- no power) after a quick adjustment, light came on and garage door went down! THANK YOU SO MUCH, you saved me so much money!!🙂

[@sidneyt1016]

Thank you so much. Yours were the first video I clicked on. I followed your steps and fixed the problem. Just wanted to show my appreciation for you posting the video.

[@ltepezano]

Another success story! Thanks so much for sharing this video with us. Fixed the issue in a matter of a few mins.

[@ltepezano]

Ps - you gained a new sub! Thanks again!

[@xiaoaichen66]

Thank you so much! I just fixed my garage door based on your instructions ❤️❤️

[@HowToHomeDIY]

You are very welcome! I am glad it was able to help you! Thank you for the feedback!

[@frankinsensed8058]

Excellent advice, fixed my door in less than a minute after watching this video. Thanks!

[@izzyforeal]

Dude, you saved the day! In the last few sentences of your video you said “9 out of 10 times it’s the sensors” and you were bang on! Thanks for saving $400!

[@HowToHomeDIY]

Awesome! Really glad to hear it was helpful and saved ya some cash. Thanks a lot for the feedback!

[@benspeeds]

You're my figgin hero this morning! My garage door hasn't closed without me holding down the button until it's fully closed for MONTHS! LOL! Someone sweeping must have pulled the wire out from one of the sensors. I reconnected the wire and it closed just fine. Thanks sooo much for making this video! Free access to information is one of the most valuable and powerful things the inter webs have to offer us.

[@HowToHomeDIY]

You are very welcome. I am always happy to hear when these videos help people out! It is almost always the sensors in one way or another. Really glad this helped you! Thank you very much for the feedback and letting me know!

[@paularamsey381gmail]

@@HowToHomeDIY my husband just got irritated and closed the door with his hand becuase he's got A.d.d. and very impatient however I LEARNED ALOT FROM THIS VIDEO. THANK U SO MUCH I JUST SUBSCRIBED

[@beejj6190]

Great vid but wonder if it can help with this particular anomaly after re-engaging? : Mine's a brand new garage door (I'd also been moving stuff in to store). My girlfriend didn't leave her key fob so I had to open the garage manually. I re-engaged the part that pulls back the garage door but the door is now only half closing?! i.e. I note the travelling white part (that engages the black metal mechanism part of the door) is stopping about two feet away from where it should - hence the door no longer shutting. I definitely haven't broken anything but that re-engaged white part refuses to travel back to it's further forward original position. Any extra help is welcome before I try tomorrow...!

[@Thefxscientist]

So happy I took the time to research this issue, my garage has been doing this for about two months, I checked and it was the wires not tightly connected so no light was on one of them. Plus mine don’t have the cap they just have tape. Super easy fix, just wished I would’ve KZbind sooner. Good stuff here! #singlemomhandylady

[@HowToHomeDIY]

Awesome! Really glad to hear it was able to help you. Good job!

[@luro5375]

Thanks so much! The problem was apparently the alignment of the sensors. Thanks for doing such a great service to all of us! Subscribed!

[@YJM5858]

You’re a Life saver and money saver! I feel so confident now that I can fix the garage door… never thought I had the talent for it…:-) thank you!!!

[@HowToHomeDIY]

Awesome! Really glad to hear that it was so helpful for you! Thanks a lot for the feedback!

[@audeanvatter7417]

Thank you for a clear explanation of potential problems. You got right to the point. Great!

[@HowToHomeDIY]

You are very welcome! Glad you enjoyed it!

[@crystalmorvan2957]

OMG thank you so much we went all winter without our garage door not shutting with our remote and you have fixed us thank you

[@steelcantuna]

Thanks a million. I didn't even have to watch your whole video. I went down stairs & cleaned the lenses & saw one of the units had a very fast blinking light. So I just pushed on the bracket a tad until the light went solid. Now the door is working as it should.

[@MarkInChicago]

Thanks! Your video saved the day. We had garage door problems like the ones in this video. I followed the advice and resolved the issue. Without this video I would have called a repairman. Thank you again!

[@HowToHomeDIY]

Awesome! Glad it was helpful and you were able to save the money! Always appreciate hearing this! Thank you for the feedback!

[@dainty251]

@@HowToHomeDIY fgggghytyyuuuuhdhfhf

[@dainty251]

@@HowToHomeDIY jifjffkkffkgkgkykgkgkggk

[@cooknvixenrican7859]

Thank you! I didn’t even know there were “lights” on my sensors. It made it very easy to figure out the issue

[@HowToHomeDIY]

You are welcome! I am glad that it made it easier! Thank you for the feedback.

[@titanicstowaway5899]

You probably just saved me hundreds of dollars. I had no idea what to do until I watched this. Now I have fixed the problem myself. Thank you, thank you, thank you.

[@tasiajones6733]

Thank you so much! Mom and I were able to fix the problem. It was the sensors, they were off balance. Keep up the awesome work! 😊

[@moonchild0658]

Thank you for sharing this! Microfiber cloth worked like a charm. Over the course of 8 years, I've left the garage door open while doing yard work and here in Arizona you blow a lot of debris from the desert landscaping. Finally caught up to the sensors I guess. $$ saved.

[@HowToHomeDIY]

Hey Carla, really glad to hear you were able to save your money! I can only imagine how much debris blows around out in desert terrain. Thanks for your feedback, I am glad it was helpful!

[@rhondafry3852]

You explained this perfectly! Thank you so much. I will certainly tell my friends!

[@HowToHomeDIY]

You are very welcome. Really glad you liked it! Thanks a lot for the feedback!

[@patrickpotter1299]

thank you. cleaned and lined up the sensors and away we go. you’re the man.✌️❤️

[@HowToHomeDIY]

You're welcome! Glad it helped! Thanks a lot for the feedback Patrick!

[@guitarman3968]

Thank you, Adam! I adjusted my sensors this morning and the door is closing now. You rock!

[@HowToHomeDIY]

Awesome! Glad it helped. Thanks a lot for the feedback!

[@crystalurosevich643]

Thank you so much, husband is in the hospital, garage door replace man out of town til April, your how to saved the day? Bless you!!!

[@HowToHomeDIY]

You are very welcome. I am really happy to hear that the video was able to help you in a time of need! I hope your husband gets/feels better soon! Bless you too Crystal!

[@PARKEUNEON]

Û

[@kimberlyvantrees2075]

@@HowToHomeDIY a

[@jermainethurman1122]

Replace kerosun Omni 85 wick

[@yeimysantos6624]

You're a life saver. I was able to fix my garage door all nyself with your video. Thank You 🙏🏽

[@HowToHomeDIY]

Awesome! Really glad to hear that it was helpful for you! Thanks a lot for the feedback!

[@mauriciolomas8982]

Awesome!! Thanks for sharing 👍

[@beenBenstillam]

Me too! Thank you! House is less than two weeks old. Loose wire. I squeeze and twisted the connection a couple of times and it works.

[@janecraig1949]

Thanks. I needed the reminder. Realigned one sensor.

[@santhoshgandi1]

You saved my day and money, it was sensors not pointing each other and definitely some cleaning activity would have disrupted. Thanks a ton!

[@cessna172ident]

Ran through your tutorial just now while trying to figure out why my garage door won’t close. It comes down barely a foot and then goes back up. Turns out, one of the sensors was out of alignment. After a quick adjustment, viola it closes. Thank you so much! I’d be at a loss what to do.

[@pennylane729]

You totally fixed my garage door! It was the sensors 🤣 you’re awesome, liked and subscribed ;)

[@HowToHomeDIY]

Oh awesome! I am really glad to hear it was helpful for you! Thank you for the feedback and also your kind words!

[@ashs8606]

This was excellent, I was having the same exact issue. I did check all items you mention. All was good but it woudnt work! I unplugged it for 1 hr then plugged it back in and it worked like a charm! So if others are in similar situation like mine it helps to unplug for a while for the it to rest. Nonetheless excellent info here

[@HowToHomeDIY]

Thanks for the added tip!

[@eduardozetina2412]

Hello Adam. I had the misalignment problem that you perfectly described I followed your directions and fixed it right away. Thank you, thank you thank you! I truly appreciate it and just subscribed to your channel.

[@DimensionalAlchemist]

This helped me out!!!!! I can't believe this worked!!!! You are out here saving lives.

[@HowToHomeDIY]

Haha Awesome! Really glad to hear that it helped you out. Thanks for the feedback!

[@xyz8551]

Thanks a ton...it helped me and my blood pressure was in control 😅

[@HowToHomeDIY]

😄You are very welcome! I am glad it was helpful. Thank you for the feedback!

[@cliffthompson4149]

That was a big help I just fixed it and under a minute. Thank you brother and may God bless you always :-)

[@HowToHomeDIY]

Excellent! You are very welcome. Really glad to hear it helped! Thanks a lot for the feedback and God bless you too Cliff!

[@henry240z]

Thank you so much. I was having problems with ours. I noticed one of the sensors was flickering. Moved it up and is now working!! Thank you again

[@joseibarra5588]

Thank you sooo much you just saved me a couple hundred bucks! After just having to pay for a new AC unit this past weekend, having to pay for my garage door to be fix was the last thing I needed!

[@HowToHomeDIY]

Awesome! Really glad to hear it was helpful. Thanks a lot for the feedback!

[@aboladedawodu5965]

Thanks you.. I just fixed my garage door based on your instructions. once again thank you.

[@HowToHomeDIY]

You are very welcome. I am glad it was helpful!

[@citizensnips2400]

Thank you man! You are an absolute legend and a massive help!

[@HowToHomeDIY]

You are very welcome! Really glad to hear you liked it! Thanks a lot for the feedback!

[@aaronhall7862]

Just got ours fixed like 2 months ago. Was about to be upset that it wasn't working already. Checked tip #2 and our rake was blocking the sensor. Works normal again lol. Thanks!

[@33stargate]

Thanks, You saved me a lot of money. I fixed my garage door with your help.

[@wurstofall]

This was exactly my problem. Thank you! I had bumped the sensor with my motorcycle and bent the bracket therefore making an intermittent signal with the other sensor. I appreciate you!

[@HowToHomeDIY]

Ok awesome! Glad it was helpful and you were able to get it fixed.

[@sailman28]

Also if you have direct sunlight hitting one of the beams, that will cause your door to not shut! I just found this out with my door! I put a piece of cardboard near the sensor to shade it, and it works perfect now. That sun would hit that beam every year in the month of February, just at the right angle to interfere with the electric beam!

[@HowToHomeDIY]

Excellent tip! While it is rare, it definitely does happen. Glad you figured that out. I have heard from a couple others with the same situation. In a couple of weeks the angle of the sun will be different and the issue will magically go away haha. Thanks for the feedback and that extra tip for folks!

[@2010lynniek]

This also happens to mine!!! Morning sun… I will try the cardboard for shade!!

[@souflikar6702]

Very true had the exact same issue. Even if the sensors are perfectly aligned, the sun can interfere at the right angle. I deal with it all summer long……except at night of course. Cardboard works great for blocking.

[@robertlivingston1634]

Yup, I made shade hood's with large heat shrinkable tube

[@shellyb9553]

Where did you put the cardboard?

[@gizmo7877]

Thank you, thank you, thank you!!!! I did exactly what you said to do to fix the door 😮problem. AND IT WORKED!, I was so stressed out thinking about having to pay for a new opener which would be a HUGH hardship for me. I can’t tell how grateful I am that you posted this information. Think I’ll subscribe in case you can help me with other issues. I’m a senior who does DIY and fix ems and could use all the help I can get.

[@valroe7034]

Thank you!! You’re amazing! Cleaning and realigning the sensors worked perfectly great video ❤️

[@matti.972]

This was sooo helpful! I almost panicked when my door wouldn't close. Thank you!

[@HowToHomeDIY]

You're very welcome! I am glad you found it helpful. Thank you very much for the feedback!

[@felixthecat1964]

Mee too I was like 🤦‍♂️so I heard lots of dyi on you tube , I was able to fix without calling maintenance for the property I am renting

[@LloydTackwell]

you just saved me from calling a tech, the sensor thing got mine going. the other issue you didn't mention was the emergency latch with a rope dangling is disengaged

[@HowToHomeDIY]

Awesome! I am glad it was helpful! Yeah if that is disengaged it also wont work, you are right!

[@lindasingleton-johnson4732]

OMG...nailed it on the first try....It was a leaf blocking the sensor. You saved me $100+..Grateful.......Thank you

[@HowToHomeDIY]

Awesome! Glad it helped you save some hard earned money! Thank you for the feedback!

[@SpeEDTeacher4Christ]

Thank you so much! I had the blinking red light and once I cleaned the censors it was working again! You do not know how valuable you are! #singlefemalehomeowner

[@krisg3605]

Thanks a lot, I fixed my garage door.

[@HowToHomeDIY]

Awesome! I’m glad this video was able to help! Thank you for the feedback.

[@eduardoveyan4970]

Thank you very much

[@Quintpeterson]

You saved my sanity I was about to rip the door apart … Senses weren’t lined up thank you so much you guys are awesome

[@HowToHomeDIY]

You are very welcome! Really glad to hear you liked it. Thanks a lot for the feedback!

[@Chief1One]

I'VE replaced the sensors before, and with my old door the problem has resurfaced. Your vid served as an EXCELLENT refresher. THANKS

[@gerardopena3405]

Great video brother I was able to get my garage door fixed by following the instructions given by you, I appreciate it 🤙🤝

[@HowToHomeDIY]

Great! I am glad it was able to help you. Thanks a lot for the feedback!

[@veronicamontes3374]

Happened to us this morning and I watched your video and got the garage door down 👍🏻

[@HowToHomeDIY]

Great! I am glad one of the fixes helped. Thank you for the feedback!

[@thehamsterarmy2380]

ALSO! The lock button may have been accidentally pressed. This just happened. The receiver was green and red, wires looked fine but the sender was completely off. Then I clicked the lock button and went right down

[@Defi4Life]

Thanks for this note. Pressing the lock button worked. Garage door closed after pressing it

[@danielfortonforton223]

Where is the lock button

[@Defi4Life]

@@danielfortonforton223 Right next to the button to open the garage door. Mine was right below it. It has a picture of a lock

[@birdenthusiast2095]

Thank you for your comment. This is EXACTLY what was wrong with ours. Saved us from looking like fools to the garage door repair people.

[@pharmaflam]

Me too. Should be the first thing you check, even before the sensors.

[@MG-ot2yr]

Thanks so much for this video, saved me a repair call. It was a sensor that got tilted upwards then had the metal framing blocking it. I had just had a delivery and the door was open, delivery person put the package inside the garage and must have knocked it. I just repositioned it and door works fine now. Thanks again!

[@taiuqsab]

Thank you for this. My garage door wouldn’t close on the first button press for months. Finally it stopped closing altogether and I was so upset because I couldn’t get anyone to come out and take a look. Turns out because my home is a new construction and after settling a bit, the right sensor became misaligned by a few centimeters. I pushed it in place and the red light stopped flickering and my remotes worked again on the first push. Thank goodness! No more running in and out of the house to leave.

[@HowToHomeDIY]

Awesome! Really glad to hear it was able to help you finally get that fixed! Thanks a lot for the feedback!

[@chantelleg5529]

Life changer. You just saved me $200+. Thank you 😊

[@habibhaqeeq]

Thank you for valuable video, my garage door was the first thing you addressed Sensor was dislocated and you saved me good amount of money Keep up the good work brother

[@HowToHomeDIY]

You are very welcome! I am really glad you liked it and it was able to help you. Thank you very much for the feedback!

[@TheSalesEvangelistDK]

Awesome! I cleaned the sensors and now it’s all good. Thank you.

[@HowToHomeDIY]

Awesome! Glad to hear it was helpful! Thank you for the feedback.

[@NagaAdd-kc1js]

This is so helpful. I almost panicked.I fixed my garage door.It is working now.Thanks a lot.

[@Jin-sy9wi]

you are my hero today 。I had exact this problem for over a few weeks, a big headache. I started fixing my garage door while watching your video, I fixed the wire,make green light on, and clean the lens ，problem solved 。 bow with respect 。 Amituofo

[@HowToHomeDIY]

Awesome! Glad it was helpful!

[@BluSkyCoolWind]

Hey man, a thousand thanks to you! We were about to call a garage specialist. You saved us lot of money.

[@kevinhunter8156]

My garage door wouldn't close completely. I just messed with the sensors and everything is fine now. This video helped a lot. Thank you 🙂👍

[@tonygeorr9839]

Thank you for your help! A technician was on his way for 175 dollars to fix my door. While waiting I watched your video and got my door fixed before he even got here. Thank you🙏🙏

[@mindcontrolcentral3712]

YOU JUST SAVED ME TONS OF MONEY -- It was the sensors! Thank You!

[@JoeJoe-zt4gk]

Had the problem all winter. I thought it had something to do with the weather. After watching the video, it took all of 10 seconds to fix. Thank you. 🙏🙏

[@HowToHomeDIY]

Oh awesome! Sorry you didnt see it sooner. But glad it was able to help you out. Thanks a lot for the feedback!

[@morlatov]

Nice! Rightly predicted a loose wire after using the leaf blower in the garage. Sensor was not turning the green light on. I was able to re-adjust and put back into operation. Thanks!

[@carlo6912]

Good advice. Thank you for explaining it so simply.

[@akeemkhan9811]

The sensor alignment was the issue for me. Thank you for uploading this viedo!!

[@carlamariev]

OMG you saved me so much!!! Few minutes in you solved my problem!!! Bless you!!

[@HowToHomeDIY]

Oh awesome! That definitely makes me feel good. Thank you very much for letting me know. I am glad it was able to help you!

[@maceygaze8767]

I just fixed my garage. I am so excited about this. Thank you for the great advice!!!

[@janicestrong6895]

Great outline of garage diagnostics! Thank you.

[@HowToHomeDIY]

You are very welcome! I am glad you liked it. Thank you very much for the feedback!

[@GroverGobananas]

Just watched this and fixed the misaligned sensors. Worked perfectly. Thank you good sir!

[@HowToHomeDIY]

You are very welcome! Glad to hear it was helpful!

[@SherryZottola-xm2fr]

Omg thank you so much! As a woman living alone i pretty much know nothing and you helped me fix this right away!

[@antamasse1781]

Thank you for your video, I went through the checklist and the first part was my problem. Thanks for helping me save some money.

[@gaglani77]

Thanks for the brief to the point video. Solved my garage door issue and $300 trip charge

[@stevendavis4300]

Thank you so much I appreciate your videos and you help me have a better Sunday. My frustration level is down to one. God bless you and your family have a great day

[@HowToHomeDIY]

You are very welcome! I am really glad that it was able to help you! Thanks a lot for letting me know and God Bless!

[@mrtonman1]

Man you helped me out. It was baffling me why wont my door close. Looked at the sensors. I have no lights my sensors. But the one was just ever so slightly misaligned. 2 min. I fixed it. Thank you.

[@HowToHomeDIY]

Awesome! Glad you were able to get it fixed yourself. Thank you for the feedback!

[@Graduationplaylist]

Thanks so much!!! It was just aligning the sensors...saved me so much money!!

[@HowToHomeDIY]

Awesome! Glad it was able to help you and save some hard earned money. Thank you for the feedback!

[@yoo2ber]

Thanks a lot. As a new home buyer, I saved a few dollars after watching your video...gotta be careful while sweeping the garage sensor area...😊

[@krystalpitter9651]

You are amazing! All this time it was the alignment and I didn't even know until I watched your video! Thank you so much!

[@sherrysimpleeats]

Great video! Fixed my rental garage door problem with your help!

[@HowToHomeDIY]

Glad it helped! Thanks for the feedback!

[@pennythostenson6983]

Thank you! You just saved me a bunch of money. I wiped off the sensor and it worked. I am a widow on a fixed income and can’t afford much.

[@tccostello]

For anyone who happens to read this, make sure both sensors are actually installed! In this case, they make no light at all. I had thought, "oh, maybe my garage has only onc sensor, and doesn't have lights on it." I was wrong. I probably knocked off one of my sensors while taking the trash out. In any case, thanks for the video, and it got me thinking along the right track!

[@rollinmorris8018]

My man, you are a rockstar. If you were near me id buy you lunch. Just as you said, one of the sensors was loose. I probably knocked it loose while sweeping. Thank you so much. Keep up the good work.

[@hong-dachin4620]

Extremely helpful! My problem was solved watching the first 3 minutes of the video. Thank you!

[@HOUTEXKZP]

The loose wire from the backside of the Garage Door opener was my problem. Took 2 min to ck all wires and make sure the connection was good. Thanks again.

[@maryjoali2579]

This was great fixed my problem without calling someone! Thank you!

[@HowToHomeDIY]

Awesome! I am glad to hear it was able to save you some money! Thank you for the feedback!