Coolest Sounding Header/Exhaust - Jackspania UEL Header Install - 1990 Civic Si Sohc ZC D Series

Find all the Jackspania parts here!
linktr.ee/gara...
Jackspania 10% off code - GarageBuiltHondas
jackspaniaraci...
Radiator - www.ebay.com/i...
Battery Tie Down - www.ebay.com/i...
Exhaust - amzn.to/3lEU2bG
Front Lip - amzn.to/3JNwSJy
Taillights - amzn.to/3Fz6e4E
Headlight Set - amzn.to/3yMUHuz
Maxpeedingrods - 10% off code GBH
www.maxpeeding...
BullBoost Performance 10% off code - GBH
bullboostperfo...
Advan Wheels - jhpusa.com/pro...
My Favorite Products
Wheel Bearing Tool - amzn.to/33IplZZ
Milwaukee Ratchet -amzn.to/3EtpNJp
Jack Stands - amzn.to/3lvA5A2
Cameras used in this video
My GoPro - amzn.to/2YQ3OGZ
My Mirrorless Camera - amzn.to/2HzzFF
Decals available for purchase here - garagebuilthon...
Send me stuff here!
Jon Widmer
PO Box 13594
El Paso, TX 79913
/ garagebuilthondas
Thanks for watching!
Disclaimer
"Due to factors beyond the control of Garage Built Hondas, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. Garage Built Hondas assumes no liability for any property or personal damage that may arise from doing a repair on your vehicle after watching any of my repair videos. Due to factors beyond the control of Garage Built Hondas, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Again, any injury, damage or loss that may result from improper use of tools, equipment, or the information contained in this video is the sole responsibility of the user and not Garage Built Hondas.
DISCLAIMER: This video and description contains affiliate links, which means that if you click on one of the product links, I’ll potentially receive a small commission at no cost to you. This will help support the channel and allows us to continue to make videos like this. Thank you for you support!

[@legomyeggo1187]

Nice. Doesnt even sound like a d series🎉

[@DoWutNow]

Hondas had the best sounding starters. Wish I could get that on all my cars

[@jimhiscott2918]

Just started the video. I am so curious to hear the new sound. I like it when videos like this get uploaded. It's definitely the tell all👍 Wow! I heard it. It does have a super nice tone to it!

[@justini2351]

Sounds so good, I’m about to get the 1320 uel headers

[@sinformant]

Where? Did they start making them again?

[@justini2351]

@@sinformant look it up on there site they just brought it back and you can keep ac!

[@sinformant]

@@justini2351 just did. Ouch! Much higher than jackspania pricing.

[@chris__whips]

Hey man love the videos! Could you possibly do a walk around video of all of your builds? I’d love to see all of different platforms you’ve got going, happy holidays!

[@Maplecook]

That sounds AMAZING, J!

[@nobodynoone2500]

I dig the sound. Just wish there were some better companies making these.

[@estewar03]

@unequalfabrication

[@munkydotorg]

Sounds a lot more Subaru-ish now. If I heard that coming down the road I’d never think it was a EF. But sound great! Nice content as always!

[@NismoDJ20]

Definitely getting that for my sedan. Sounds epic

[@jdmler]

very nice vid bro.the sound like a subaru xD

[@GarageBuiltHondas]

Thanks 😅

[@wopino]

Hatch is coming along very nicely, very clean brotha!

[@diceryuri]

loved seeing the header, exhaust sounds great!!! one question, i cant seem to find the header on their site?? id buy one asap if they made more

[@megaruhe6296]

I've got the 1320 UEL header with a Yonaka exhaust on my CRX and it sounds nice.

[@nobodynoone2500]

I got some 1320 'stainless' stuff but it already rusted out and busted a few welds. They refused to return any of my calls. I would buy from anyone else.

[@Kriticalanglers]

Nice hondaruu sound 😂

[@mrsquid7438]

Sounds really good 🔥🔥🔥🔥

[@victorwilks88]

Love the single gingle

[@austinpainter113]

And the headers are already sold out 2 months later 😂 glad I have some 1320’s already. Very well might get some of these later to see if they sound any different from the 1320’s.

[@NothingSpecialEF]

hatch is looking clean buddy!

[@GarageBuiltHondas]

Appreciate it brother!

[@rt4wd_wolff]

Still slow but sounds amazing! Your exhaust shop does great work Jon

[@GarageBuiltHondas]

For sure! Thanks dude!

[@tiffandtony]

Yo, that sounds killer!

[@Busydadgarage717]

Very impressed with the sound

[@efjay5042]

Sounds like a wrx 💪🏼

[@DoWutNow]

Totes random, but it's what brought me to your channel. Can you install a 90 Si rear swaybar on a base 89 EF? Car has the holes but no threads on body side.

[@GarageBuiltHondas]

Yes. Come to El Paso if you're close

[@DoWutNow]

@GarageBuiltHondas Unfortunately not close. I will find some nutserts that fit. The bushing in the trailing arm was bad. Hopefully that fixes the weird squatting problem I had until I get the inserts. Thanks for the reply. Great channel.

[@vitalioz]

Nice Subaru Civic.

[@romper4444]

Wow i had no idea companies were putting R&D into developing new header designs for b series much less d series anymore. This makes me feel all warm and fuzzy inside that old wchool honda builds arent being left behind. I really need to see dyno conparisons on these, any links to some info on that? Wait is this a recent design? Ive never heard of it, we dont get all the same shit in Canada.

[@89hybrid88]

Hold up man. Is that a subi motor hidden in there. It definitely sounds like it.

[@jimhiscott2918]

If you happen to come across a Jack Spania tubular upper radiator support mounted on a EG/EJ at the track or anywhere else it would be great to get a review. I'm about to purchase one but they are spendy$

[@sinformant]

Wish we could have heard it idled Down and a driving sound check of the straight pipe and old muffler as well for a good comparison. Just curious what the different tones were.

[@Athon08]

Just had my 1320 UEL installed and love the sound. Only thing, my exhaust guy said I need to get the flange spring bolts that connect at the donut flange. I notice you have just bolts as well. Said it could break welds or pipe if not. Supposed to be there for pipe flex under torque. Unless you have stiff motor mounts. Guessing you do?

[@itzpat215]

I been looking forever for a uel header for my civic d16z6

[@GarageBuiltHondas]

These should be back in stock soon! linktr.ee/garagebuilthondas?ltsid=c9bc55ad-4455-4716-b67b-612756acaffd

[@lisabailon9120]

Nice! I Have A 91 Honda Civic Dx Automatic. & My Muffler Smells 🤔

[@GarageBuiltHondas]

Might be a bad catalyst

[@robertalicea5585]

Now you need a new license plate

[@marquisethomas5611]

I always wanted to do this, good sht 👏🏾

[@GarageBuiltHondas]

Go for it!

[@ericg1149]

Sounds bad ass

[@mcef9117]

Nice!

[@zander4371]

Subaru brz ?

[@j_zales1390]

That sound is dope af sounds like a subie , what brand were those headers

[@GarageBuiltHondas]

jackspaniaracing.shop/products/b-series-uel-unequal-length-twister-header-b16-b18-b20-2-5?keyword=uel%20header&variant=44124740026593

[@lynnmckenney1987]

How did the power curve change after dynoing it with the UEL header vs an equal length header?

[@allenharding8604]

Its terrible for power. Pretty much kills anything you had in terms of chances of power. Just sounds ok. Both Jackspania and 1320 got theirs from some Chinese company and just rebranded it

[@nobodynoone2500]

@@allenharding8604 Bingo. 1320 are crap. IDK why they got so many youtube dickriders.

[@vacuumnoise]

Dyno results?

[@BEYTEK]

Haha sounds like a subaru awsome

[@melvinbrumski1446]

That sounds good man, wish I was a little closer to El Paso I’d hook you up with the welding. Give you a few lessons so you can skip paying people for something that’s relatively easy. Wanted to ask about the lack of power steering, you have a special steering rack or just raw dogging it?

[@GarageBuiltHondas]

That'd be nice, appreciate that, would be cool! No power steering doesn't bother me anymore, as long as it's a true non power rack. Power racks looped I think feel weird.

[@22DIM55]

Subi sound

[@sergiopenado-cortez3917]

Will this work on a 1997 EK civic D series ?

[@jonnymiskatonic]

Best sounding wet fart I've heard in a while.

[@robertalicea5585]

Lol

[@GarageBuiltHondas]

Haha

[@LuisPerez-bb4gz]

Can’t find that part anywhere any advice

[@GarageBuiltHondas]

He's out of stock. Hopefully in soon!

[@MMORPG87]

I'm no longer the only subie civic lol

[@GarageBuiltHondas]

Yeeesss!! 🙏

[@isaiahwinslow5140]

Sounds like a subi

[@Wagon_Attack]

That’s the point

[@isaiahwinslow5140]

@@Wagon_Attack it's dope

[@timhill1196]

Did it actually decrease power like the theory suggests?

[@GarageBuiltHondas]

I'm unsure, if it's been proven before then this probably did the same.

[@HonditosLoco]

Where can I get a normal test pipe for the same motor? Can't find them on ebay

[@AnthonyGarcia-uo3we]

Link to headers ?

[@Alan-if7ld]

Sounds like a subawoo

[@paimei6798]

Sound good did you notice any increase in performance ?

[@GarageBuiltHondas]

I have not. Many say you lose some HP. The car needs a tune to be running correctly also.

[@NoLimitHd92]

Where can i get one?

[@GarageBuiltHondas]

Looks like it's out stock currently but here's the site. jackspaniaracing.shop/?keyword=uel%20header&variant=44124740026593

[@garasikulonomah8700]

Its like heavy

[@TheVas1968]

Grasias por conpartir

[@turboboris6333]

Can i put this header on my D16A9 crx ? 🤔 Great sound 😍

[@GarageBuiltHondas]

Yes

[@ashtentaylor4680]

Ever had a d series idle at 2k rpm ?

[@GarageBuiltHondas]

Could be a lot of small problems.

[@6lackRain]

clean map sensor and maf sensor with CRC/contact cleaner, check for vacuum leaks, clean iacv , clean throttle plate

[@klemenzfreyr2106]

Hey i have a question for you. Do you still have obd0 or have you updated to obd1?

[@hahkay]

seems like obd1 since he mentioned a 4 wire o2

[@GarageBuiltHondas]

Obd1 using this harness. kzbin.info/www/bejne/Z5rTqHSfpamCjcksi=kztppElTk4cPqyCF

[@klemenzfreyr2106]

I asked because I have a 89 Honda prelude si. It haves obd0 and I'm having trouble finding a tuner to chip my ecu. How hard was it to convert it to obd1?

[@GarageBuiltHondas]

It's an easy job.

[@legomyeggo1187]

Do they have anything for b or k series?

[@GarageBuiltHondas]

He's sold out of the UEL B series currently. He does have a handful of other headers for B & K. jackspaniaracing.shop/products/b-series-b16-b18-b20-eg-ek-ef-crx?_pos=1&_sid=0d2a0fdd4&_ss=r&ref=klKh2uTN&variant=44124779643105

[@gurjindersingh199]

Would you lose power with this ?

[@GarageBuiltHondas]

I've heard many say you do. It's a sohc non VTEC so it's not making much already.

[@Nck_134]

Where the videos at???

[@Built_it_by-alex]

I hear a Suba...oh sorry it's just a Honda

[@DazzTone]

Bwaaah 🫴🏻

[@outshaft1670]

people will ask if you have a subaru engine 😄

[@GarageBuiltHondas]

It'd be kinda funny

[@spencersgarage]

Why does your car take so long to start?

[@GarageBuiltHondas]

Couldn't tell ya. Haven't looked into it either. It's not important to me since it's a fun car. As long as it starts.

[@MrSims-ky2ne]

​@@GarageBuiltHondasfix it, ive owned 18 different Hondas from 88-2000 all 18 started faster than that thing combined 😅

[@JoseContreras-mv5yz]

Header sold out

[@Athon08]

1320 has them available for $385

[@e36blur]

what the hell

[@GarageBuiltHondas]

Lol

[@mr.nobody7601]

So now it sounds like a Subaru and you lost power smh. I don't understand why so many people like these trash headers

[@GarageBuiltHondas]

Sohc non VTEC. It's not doing anything anyway, but sounds cool as hell.

[@romper4444]

What makes you say they are trash? Is this an old design, I've never seen it, figured it was a small company making small runs of custom header designs. Have you seen Dyno comparisons?

[@503PHANTOM1]

Trash

[@GarageBuiltHondas]

Thanks for watching, merry Xmas!

[@Linked_Ahead]

Sounds bad ass