GARDENA Automatic Water Distributor Set-up Guide

[@Sahar20090612]

I wish I knew about the instruction videos three years ago when I bought the complete setup and really tried to function as advertised. I was always wondering how the control computer communicates with the water distributer. It would has been så much easier if it was mentioned or referred to in the instruction manual.

[@grrahul]

I'm wondering as to how the master water computer communicates with the water distributor so that the water is sent to the correct outlet out of the 6 available. Also, I need to use a water pump as the pressure is not sufficient for the sprinklers. So, would that be okay and if yes, how should I set it up? Master Water Computer -> Water Pump -> Automatic water distributor or Water Pump -> Master Water Computer -> Automatic Water distributor?

[@mrlogoanimations6716]

curious about the same thing, but no answers here or on the website

[@grrahul]

@@mrlogoanimations6716 I actually bought the water distributor and it uses water pressure to switch from 1 outlet to the other. To try it, I would manually turn on the tap, then turn it off and each time, it would switch to the next outlet. So, in relation to my own query, the master water computer doesn't really communicate with the water distributor, it just drops/completely shuts off the water which is what switches the outlets on the distributor.

[@QnA22]

@@grrahul Correct, same experience here. No communication possible between computer and distributor. SS a result of this you need to make sure the correct lines are selected if you use different watering times. Additionally, it creates a small annoyance. When you want to manually water, you need to switch the tap on and off for the "dumb" distributor to reach your desired watering line. There is a button to manually switch lines, but this option doesn't always seem to work. As my partner doesn't understand, or wants to understand this, I bought a splitter with manual open and close valves. This way my wife only need to open a valve and she can use a designated line for watering. In the end that costs an extra house, connectors and valve. Close to an extra 50 Euro extra cost. Admittedly, it's also possible for about 20 Euro if I would have bought other brands. Gardena itself would probably cost even more.

[@nikolapervan4145]

@@QnA22 so basically if I only have 2 lines then I can skip the usage of water distributor completley as I dont need 6 lines.. and instead use Y-splitter and connect two cheaper watering computers like Flex or Select..

[@abecoulter8550]

What's with the RCA connector on the distributor control panel

[@mohammadalarab8703]

Can i schedule which line will start first? or is it scheduled from 1 to 6 respectively ?

[@mohammadalarab8703]

Can i make a schedule for the 6 lines by using this type of timer ? And is it a smart timer that can work from app? If not , do you have a smart timer that can schedule the 6 lines as well?

[@CultofTiphereth]

If anyone buys this and think it does not switch you have to have the outputs connected. If you test it and don’t have resistance on the output it won’t change. And also you don’t need the master control when water goes off it switches. Any water control will do. Wish I knew before I bought both.

[@pixelvisionfr]

Hi ! Can you be a little bit more specific on this please ? My setup is going nuts, schedule is incorrect as i have days with all lines selected and others with only half of them, after some days, i find my setup in bad configuration (like schedule is for line 1 but line 3 is selected...)

[@kenlawton1531]

@GardenaAustralia Can the timer be set to water each station several times per day, i.e., when establishing new turf?

[@msv28-12]

is automatic water computer comes with automatic water distributor or should by separately??

[@GardenaAustralia]

The two items are sold separately. Find more information on our water computer on our website at www.gardena.com/au/products/watering/water-controls/.

[@msene6404]

bad product, descriptions online are deceptive and make you think this functions is multiple different ways to how it really works. the splitter changes outputs when water pressure turns off and then on, the controller just performs this action on a schedule. This device does not: -Allow you to water mutliple times a day, you can only water using it automatically once a day. -work well with the sensor, it is basically useless do not buy, i still havent figured out totally how it works because of poor documentation. If you have a big garden (which you probably do if buying), the sensor will just mess up your watering because it will detect wet soil in the spot you put it after watering that spot and all subsequent watering devices will have their watering shortened. You can only use it in the watering spot you put it basically. -Function correctly all the time. The splitter swapping method functions really badly, it often skips open routes, sometimes more than once and this totally ruins your watering schedule. It can for example after watering 1, skip 2 and 3, and land on 4 on the next cycle, but it will use the schedule for 2 because thats what the controller thinks it is on. In conclusion total waste of money. Do not buy

[@kiljanseba]

Does it works with Bluetooth controller? Or need master one 🤔

[@pavel-qq5oe]

Can it be used with out the water control master

[@GardenaAustralia]

Yes, it can definitely be used manually. You can either turn the water flow on and off and the Automatic Water Distributor will move to the next opened outlet or move it along using the orange button on the Automatic Water Distributor itself (centrally located on the outlet side).

[@LuisSantos-xf8jb]

And can be used with Gardena bluetooth water distribution?i need do irrigation in more than 3 areas

[@mrlogoanimations6716]

How does the distributor speak to the controller, ie how can you set timing and outputs if the only thing that connects controller to distributor is water and hose?

[@GardenaAustralia]

Great questions! We suggest that you contact our customer service department at 1 300 804 213. They would be happy to walk you through how the Automatic Water Distributor works.

[@evfusion4094]

@@GardenaAustralia What a useless answer. Rahul Garg has already answered the question - you could have referred Mr Logo Animations to that answer or to your answer to pavel le bg

[@mouhesen]

@@GardenaAustralia They don't want to expose their secret which is water pressure. 😆👊👍

[@thomasleze9618]

I respected the instructions but the selector no work. The selector no change position. Consequently, only the one aera is watered. Why ?

[@GardenaAustralia]

Hi Thomas. In our experience, the best way to solve a problem with the Automatic Water Distributor is for you to call our customer service department and they will go through the programming with you step-by-step and can troubleshoot the problem with you live. Feel free to call them at 1 300 804 213 from Monday to Friday 9 a.m. to 5 p.m.

[@Whappers1]

I understand the water distributor is also compatible with the more expensive Gardena Smart water control, but how is it possible to configure this from the Gardena Smart App? I can’t see any options to select water lines in the App like you can find in the options of the master control.

[@GardenaAustralia]

Hi Stephen. Unfortunately, we do not sell the Smart products here in Australia. If you are reaching us from another country, can we suggest that you get in touch with the GARDENA customer service of your country for further assistance. Happy Gardening!

[@jeromebouyssou5199]

Hello I don’t understand how can I make the water flow out of the six exit at the same time? Could you please help?

[@GardenaAustralia]

Hi Jerome. The Automatic Water Distributor works on a cycle with one hose working at a time. They can be used manually or managed by an automatic water computer. For your requirements, I would suggest using our Four Channel Water Distributor and if you need more hoses, you can add a Twin Tap Connector to the hose connectors on either end. I hope this helps. www.gardena.com/au/products/watering/hose-fittings/four-channel-water-distributor/901160801/ www.gardena.com/au/products/watering/hose-fittings/twin-tap-connector/901160701/

[@jeromebouyssou5199]

@@GardenaAustralia Hi, it works. It just need more pressure to change the exit by the cut. I use an electric programator plug on my pump. Thanks for your answer.