Garmin Striker Vivid 9SV Traditional Sonar

This video goes through all of the settings on the traditional sonar. If you have any questions about the Garmin Striker Vivid 9SV, please leave them below. Thank you so much for watching.
You can find all the Garmin Units in the Links Below!
Garmin Striker 4
amzn.to/3mAjz1Q
Garmin Striker 7
amzn.to/39YB72J
Garmin Striker 9
amzn.to/3t4x9wM

[@72wildside]

I'm suprised you dont have a million views man, your content is great and you explain the product perfectly.

[@Marcs_TV]

Thank you. Trying to make better and better content.

[@rogerramjet7567]

Very helpful. Thanks from Michigan.

[@LordByronMacintosh]

thank you, very informative!

[@piterekgti]

First! Thanks from Poland.

[@richardallen8465]

Very informative, super great video

[@Marcs_TV]

Glad it was helpful!

[@hanswurst1055]

Hi Marc, thanks for your information about the Vivid 9SV. I noticed that the A-sope of the Vivid 9SV looks very different from many other sounders on the market. Do you know, if there are settings for this?

[@garryryan244]

A great presentation , my problem was you spoke very quickly and further to that for us Older guys you sure have a FAST FINGER!!!! All put together at a (Bit) slower pace would be EXCELLENT cheers Garry

[@Marcs_TV]

Noted and thank you for letting me know!

[@ArnaudDeSmedt]

Great video ! Do you know what frequencies are available when it is connected to the transducer ?

[@Marcs_TV]

Traditional: 50/77/200 kHz CHIRP (mid and high)

[@ArnaudDeSmedt]

@@Marcs_TV Yes but i think that the transducer only has 150-240khz buy.garmin.com/en-US/US/p/530291#specs

[@Marcs_TV]

@@ArnaudDeSmedt I can try to check when I go out to the lake next time and let you know.

[@oldfartron1205]

How big & how long does your battery last.?

[@Bing724]

Does the boat need to move continuously to get refreshed scans or does it keep refreshing when not moving ?

[@Marcs_TV]

It keeps scanning no matter what.

[@mavilerinarasinda]

Hello, i would like to buy a garmin vivid 9 from USA. But i will use it in Turkey/İstanbul. Can i use it without any problem?

[@erdembozkurt538]

Sorunsuz kullanabilirsiniz menüsünde Türkçe var ilk kurulumda seciyorsunuz

[@ChrisPolh88]

I’m having issues with mine unless I’m doing something wrong , it flashes the depth in top left corner like it’s on freeze mod and it should automatically adjust as in using my hobie when moving , it stops and pauses all the time and I’m getting yellow and blue lines through the screen like the gain is strong but then when I get out in deeper water it refreshes and seems to work fine like simulated mode if that makes sense? just not to sure if it’s drawing to much power ? Is there anyway I can send you a pic and video of this for some help ??????

[@Marcs_TV]

This sounds to me like the connection to your transducer is not good. It will do that if the transducer is out of the water or it could be that it has a poor connection. I would try unplugging and plugging back in. These units do not draw much power so I do not think it is that. The depth flashing means the transducer is not getting a signal.

[@tptptptptptpssssss]

Hi if you unplug your Garmin to take is side do ya lose all setting ? And do your settings on traditional change the way Clearview looks .please and thank you

[@Marcs_TV]

No it should keep your settings.

[@tptptptptptpssssss]

Thanks mate I'm going out again today yesterday I'm Clearview pictures was not good at all I'm thinking I need to play with the gain ?

[@ferrellcat5860]

I have an issue with mine . No matter what screen I have on display . The left screen is split . Meaning it's showing the same screen twice . Even if I have it setup to run 3 screens , the screen on the left with be split . If I run the single traditional screen ,it splits it in half . I have factory reset it 2 times to try to fix this issue but no luck . If someone can help , I qould appreciate it very much

[@Marcs_TV]

Sounds like your product is broken if I am understanding what is happening to you correctly.

[@robertduthie]

i went into range sttings and found it but i must have clicked another button now the whole screen is hardly visiable,do you think i will have to get a specialist to fix it???

[@Marcs_TV]

No you probably clicked the zoom feature. If that doesn’t help you just reset your sonar settings and try again.

[@tptptptptptpssssss]

if u hit the power button 2 times quicky it will go brightly or dimmer

[@robertduthie]

when out in my boat on open sea with the garmin striker on the screen keeps jumping as the depth goes up or down is there a setting to use to elinenate this so i can see the seabed visable all the time ??? thankyou

[@Marcs_TV]

You can adjust the depth range and change it from automatic to your desired depth.

[@robertduthie]

@@Marcs_TV like 25-35 fathoms

[@robertduthie]

@@Marcs_TVor 0-40 fathoms

[@robertduthie]

@@Marcs_TV cheers mate where do i find that option

[@Marcs_TV]

@@robertduthie it should be the range setting when you enter the settings for the sonar. By default it should say auto. You can change it to whatever you need and I think that will be what you are trying to do.

[@SFFRFIRES]

Looking at this for a salt water bay boat. Whats your thoughts??

[@Marcs_TV]

I am not familiar with saltwater applications. I live no where near saltwater. Sorry!

[@SFFRFIRES]

@@Marcs_TV will the sideview show me reefs and structures in the water out in front of me? I guess like a map would show?

[@Marcs_TV]

@@SFFRFIRES it will not show stuff in front of you. It will only show off to the sides. To see out the front you would need an Echomap and livescope.

[@alyssaboudreaux2319]

Appreciate it. But pleaske stop saying "Kay" after everything lol

[@Marcs_TV]

Might be hard but I’ll try!

[@karomag]

Еще бы понимать, что ты лапочишь... А так видосы зачет!

[@jigtime5341]

зря ты его приобрел , это какашка)))

[@Leonidovich1975]

Нормальный эхолот, настраивать уметь нужно.