Gas Station Structure Modelling in TEKLA STRUCTURES 2016

[@ekondakov]

Maurice thank you for your Tekla videos! Your channel was first what I found on this theme. I'm from Russia and there aren't good videos about Tekla on Russian language. But it's fine, because I can learn English at the same time:-)

[@giorgos_theodoropoulos]

Another great tutorial with a non usual structure. Congratulations Maurice!!! I am looking forward for your next unusual steel structure!!!!!

[@MauriceDimba]

Thank you george

[@jithesh811]

This was a good tutorial to build a structure like this.....

[@MauriceDimba]

thank you and keep watching for more

[@user-pb4qr3rx3m]

I appreciate your taking the video lectures.

[@MauriceDimba]

You're most welcome

[@kevinccce]

time to review my tekla skills. thank you for this.

[@MauriceDimba]

you're most welcome and keep checking for more

[@user-pb4qr3rx3m]

Your teaching is very beneficial for me,I want to learn video lessons. Export to pdf files 2D drawings, Export to Excel files created history, 3D perspective view screenshots to export, Thank you for always.

[@MauriceDimba]

No worries I will upload a video content containing all that,thanks alot

[@daydreamersworld298]

Good job. Also do videos on detailing draft. Such video are not there. Please share some basics , procedures of deatiling based on ASIC standard. This will be more helpful to beginners like me.

[@MauriceDimba]

I will consider the American standards on next uploads, just keep watching the channel for more educative videos

[@daydreamersworld298]

Thank you sir . Eagerly waiting.

[@djongmeilleur1067]

Dear Maurice, thanks for your videos. Your modeling is great. Please what about the design of the member??? Can we have another for designing and checking of the structure?

[@MauriceDimba]

Structural analysis will soon be uploaded

[@AtulEngineer]

How to export tekla model to analysis software as sap 2000,e-tab,staad. Scia has direct link with Tekla.

[@mechwar]

Maurice thank you for your superb tutorials. And congratulations for your effort. If it is possible I would like you to help me with a problem I am facing while I am trying to follow your steps on this particular example. Whatever I select for a connection I always get an error with a red cone. What am I possibly doing wrong? Thank you in advance.

[@MauriceDimba]

The red cone indicates that your connection configurations are wrong,please re-configure your connection or try a connection with similar features

[@mechwar]

Dear Maurice thank you for your response. I did try but always error. I also noticed that at the middle connection where the 3 elements are connected, it is indicated as correct but the bolts are far away off the beams and upside down... Based on your experience, have you ever seen something like this?

[@MauriceDimba]

Double click on the joint,a dialogue will appear go to general tab,under general tab you will see 'up direction',click on the drop down arrow on first box and change those +y,-y,-z,+z,+x,-x

[@ahmadnaji4223]

dear maurice how can i use different profiles from different environments ? because i cant get ipe sections and steel sections ltd at the same time ... thank you

[@MauriceDimba]

If you don't have or can find sections in your Tekla chosen environment,you can download this model this and use it as a template

[@ahmadnaji4223]

I have the uk and default environments ...but i cant find the IPE in UK ... and i can find it in the default .... is there a way to transfer the uk sections to default ?

[@ahmadnaji4223]

@@MauriceDimba and how to download model ?

[@rogerjesusdiazvilcas3954]

Hola podrias compartir los planos? Para poder modelarlo?

[@MauriceDimba]

Este modelo no está disponible ahora como modelo, a menos que lo rehaga.

[@allenfrostjames5521]

Sir could you tell me if the Created structural model in Tekla structures can it be exported to Tekla Structural designer for Design?? and further analysed & designed completely . Lastly how the analysis & designed results in Tekla structural designer is further Re-imported to Tekla structures for creating G.F.C detailed drawings & schedules using tekla structures.I would really appreciate if you could suggest a reference video over these process. I couldn't find any so far

[@MauriceDimba]

you can import into TDS as IFC file for further analysis and design

[@allenfrostjames5521]

@@MauriceDimba Thanks sir for your immediate reply .I would request you to please make a video of the procedure of importing Tekla structures model into TSD and further analysising and designing .. Could you please make a soon on that.. We are kindly Expecting a reply on this from your end

[@leuyimbac7060]

million thank to you.

[@MauriceDimba]

You're most welcome

[@Manu49pere]

Hi Maurice, how can I activate a point at the edge of a profile ? Thank you

[@MauriceDimba]

You can now watch Tekla tutorial videos directly from civilmax.com/sofware-training-videos/

[@krishnajagadeesh6307]

Your provided online training class

[@MauriceDimba]

check the full training here: www.udemy.com/course/a-complete-tekla-structures-essential-training-for-beginners/learn/lecture/21405716#overview

[@garybailey4738]

Hi Maurice can explain how to do views A-A B-B C-C ect please Regards Gary

[@MauriceDimba]

check the new uploads

[@Nak_OS]

Hello @Maurice. Hope you are well. I have one query, how to activate Tekla softwares simultaneously, like tedds and structural designer/ fastrack snd use the keygen acrivator. Please help. I can not use both one gets rejected.

[@MauriceDimba]

Hello Osman,thanks for following this channel,i did not get your point correct,you meant activating Tekla Structures?,I hope you don't mind.

[@Nak_OS]

@@MauriceDimba he there ! yes. See i have installed Tekla structure and also i have installed tekls tedds and fastrack. But if i use the keygen to activaate/create fastrack local.key file, the local.key file for tedds or structures gets revoked. I cant use them both at same time.

[@MauriceDimba]

uninstall both fastrack and tedds,reinstall them and direct each them to a different location during installation on the same drive.

[@Nak_OS]

@@MauriceDimba oh, ok. Let me try that. Thanks alot for the help.

[@Nak_OS]

@@MauriceDimba Bro.! I cant see option to install different directory? Is it under custom installation?

[@charefeddinemoussaembarek6911]

Hi Maurice Good job, i don't have Ayrshire cold rolled sleeved connection in my tekla structures Data base need help Thank you

[@MauriceDimba]

Thank you,which version are you using?

[@charefeddinemoussaembarek6911]

thank you for responding sir. I fixed the problem, Regards, charef eddine.

[@EVERTHEMZ]

Hi Charef, I have the same problem. How did you solve it?

[@charefeddinemoussaembarek6911]

use the UK envirnoment or you can download the Ayrshire cold rolled sleeved from tekla warehouse

[@EVERTHEMZ]

Thank you for you help. I use UK environment and it works.

[@Andrewmyintmyat]

Thanks so much, Sir.

[@MauriceDimba]

You're most welcome andrew

[@balaportejean7015]

thk you sir Jesus loves you Believe in him and repent

[@MauriceDimba]

you're most welcome

[@ibrahimhamad9747]

how to downlad tekla 2016 do u hv alink

[@ashokreddy3307]

make a video on advanced options

[@MauriceDimba]

I will effect that thanks alot

[@yecyec3927]

LAG 14 SECONDS. 56

[@MauriceDimba]

noted