Gas turbine engine running on Jet fuel. KJ66 Miniature.

[@ajinkyayamgir1016]

you are the one who make indias frist miniature gas turbine engine

[@MR.Ondobhaiya]

I don't think he made this '

[@MR.Ondobhaiya]

He buying this

[@danieletcheverry1743]

Es falso el vídeo. Nunca puso el motor jet en marcha . Mira el combustible como no se consume

[@danieletcheverry1743]

Fake

[@rchyderabad7198]

​@@danieletcheverry1743 it's not fake, it was made by me only

[@JetEnginesIndia]

Good to see someone else in India is also doing it. Let me know if you'll need any help.

[@reedy93]

Well done it's a lot more lively with liquid fuel ,be careful were you point it as it will kill the bush/tree .

[@TeamRCHyderabad]

Thanks for nice words. Now the thing in my mind is if I keep on pushing fuel at what point the engine can bear or like when it can get risky. Do I note the vibrations? Turbine no longer gets hot now.

[@reedy93]

@@TeamRCHyderabad depends on what bearings you are using and and bearing set up /preload /oil system I have run standard steel bearings to 10 psi case pressure ,best way is to do short runs and slowly increase rpm/pressure and check for bearing smoothness and vibration. shut down if you hear any unusual noise and check.

[@drbulb3757]

Looks powerful

[@TeamRCHyderabad]

Yes it does.

[@Mrsnasimabegum-y1v]

Thrust?​@@TeamRCHyderabad

[@sahameed]

Excellent work khaled 👏 👍

[@TeamRCHyderabad]

Thanks 😊

[@tharhitrovesh1397]

Great work brother, really happy it's a video from India... I've few doubts... are glow plugs necessary, do you use them?can ceramic bearings help in neglecting lubrication? How much did it cost for you overall? ...Would greatly appreciate a response, anyways nice bro.🔥🔥🔥

[@TeamRCHyderabad]

Glow plug not nessary to start combustion. Torch lighter can also be used. Ceramic bearing does not require as much lubricant I think as they don't get that hot. I am using normal stainless steel bearings. More than cost it's the efforts to design build test then failure many times. There is always room for improvement. Hope I answered your question.

[@tharhitrovesh1397]

@@TeamRCHyderabad Thank you very much brother, i really appreciate your quick response ...It helped a lot.

[@skulls4891]

How are you injecting fuel?? Is it a pump with a nozzle?? I want to know for my project 😁

[@rchyderabad7198]

Fuel is injected using a brushless pump

[@nikhilraveendran3265]

Great work bro 👍

[@Umarzaman8400]

Well done bro

[@TeamRCHyderabad]

Thanks Umar

[@prabhakaranag2891]

What difference between burner and engine

[@pakjetengine6395]

Good working

[@pakjetengine6395]

Nice bro

[@thejalakahmilakshmi1206]

Halo sir engine price how

[@SantuStarkVision]

Hi Anna , I wanted to buy jet engine, from where to buy, Is it available in India, I wanted to run it with Jet-A fuel

[@vaibhavebhatnagar]

You are the only one after DG Propulsion, which is working on Turbines. What is the thrust output for this engine.

[@rchyderabad7198]

Thrust is about 5kg

[@vaibhavebhatnagar]

Can you share an email address to connect with you.

[@Noob73697]

Where you buy it

[@tpapa9612]

Bro can you tell what meterial you have used in exhaust nozzle and combustion chamber.

[@TeamRCHyderabad]

SS304 Metal

[@tpapa9612]

@@TeamRCHyderabad thanks bro

[@Noob73697]

Price of it plz tell me

[@rawandgaming7113]

max thrust??

[@TeamRCHyderabad]

3kg at the moment

[@rawandgaming7113]

@@TeamRCHyderabad very low need more thrust

[@RealScarKnight]

Yar iska fuel kaha sa lia , do u guys sell a1 jet fuel

[@TeamRCHyderabad]

Some of my well wishers arranged this jet fuel for me. I don't sell any.

[@thingsomething9850]

With out the motor, how it's speed is increase?

[@TeamRCHyderabad]

Speed is controlled with flow of fuel.

[@khanadeewana7364]

I wanna buy it

[@Iminpain-g3f]

How many pounds of force does it push with

[@TeamRCHyderabad]

At the moment it's giving 3kg of force. But after fine tuning it should give upto 6-8kg.

[@Iminpain-g3f]

@@TeamRCHyderabad ok, what if you used hho/ oxyhydrogen

[@shawndubay4050]

​@@Iminpain-g3ftoo explosive and fast burning of a fuel and even if you could get it to run on that fuel it would definitely be very dangerous and melt the turbine wheel and other internal components. They run very good on jet fuel, diesel, biodiesel and kerosene.

[@HMDBH51]

hey I am interested your vidio because I am making jet engine at home.

[@TeamRCHyderabad]

Nice to know. Do post some videos.

[@rakeshshrama5888]

Mujhe iske all parts chahiye aap doge mujhe

[@Nickson-mwm]

Homemade brother ???

[@rchyderabad7198]

Yes home made but some parts done in workshop using lathe machine

[@rchyderabad7198]

Yes

[@rohitmaity2529]

Is it capable of flying ?

[@TeamRCHyderabad]

It needs some more improvements which is on-going. After that it can. Need to fix starter motor and clutch. Need to also reduce weight.

[@rohitmaity2529]

@@TeamRCHyderabad will it be available for sale ?

[@TeamRCHyderabad]

@@rohitmaity2529 Engine still not ready . But parts I can.

[@rohitmaity2529]

@@TeamRCHyderabad please complete it soon. It will create a huge sale here. We have have a designing startup. If any requirement of us is there let us know please.

[@brijeshyadav-ms1fg]

@@TeamRCHyderabad you have all the parts ? I am interested in purchase of guide vane and diffuser

[@yousefashry2897]

fuel pump type ?

[@rchyderabad7198]

Brushless motor pump

[@TonyHerstal]

👏👏👏

[@rchyderabad7198]

Thank you

[@PoojaSharma-li6od]

Sar please reply to kro

[@devinttrobloxforroblox2242]

2:20

[@rakeshshrama5888]

Sar mujhe iske parts chahiye please contact no. Send kro

[@PoojaSharma-li6od]

Sar please contect no. I'm interested in this engine parts

[@TeamRCHyderabad]

You can whatsapp [phone]