GATE Titan II MOSFET unboxing and review

[@behringerm4466]

I am just after installation. TITAN II is mindblowing. I am impressed with sensors improvement in comprasion to TITAN I - over 60 sensitivity settings for the first mm of movement and double gear sensor

[@wyshtechairsoft]

Doesnt the cycle of each shot sound much more consistent?

[@jhqtech]

Very nice video! However it looks like nothing new from gate. Funny how they ditched the tooth counter of the old titans for cutoff cam detection like perun and jefftron have been doing. Idk I dont see any reason to get this over the jefftron leviathan besides if you just like the feel of an optical trigger over a microswitch.

[@wyshtechairsoft]

Thank you! Very good observation. I suppose it just comes down to preference.

[@RhyllioMaccShellton]

Basic version ?

[@wyshtechairsoft]

This one is advenced.

[@MrGoogle87]

What are actually the differences?? Compared to old one, can’t find this

[@wyshtechairsoft]

The Titan II has more sensors to detect the sector gear and in different spots. This is to help reduce the issues of the old version not detecting the sector gear. Additionally, they added a plug-in for accessories like mag detection, hpa engines, bolt release detection. Best of all, it now has built in blue tooth.

[@joshreddington3195]

can i upgrade the basic to the advanced like you could with the old titan ?

[@wyshtechairsoft]

Yup! It works exactly the same way.

[@SKABvr]

What is difference between basic version and advanced?

[@wyshtechairsoft]

Just the firmware that is available. You can find the comparisons on Gate's website.

[@SKABvr]

@@wyshtechairsoft Okay, thanks

[@franciscojavierfuenzalidac6745]

Hi, question You need to buy the blue link or you can use it conected to the App only whit Bluetooth (I usw the App whit another gate titan)

[@wyshtechairsoft]

The Titan 2 has the bluetooth built in. There is no need for the blue link.

[@revengeof1307]

Does the titan 2 basic have precocking?

[@wyshtechairsoft]

Yes

[@LAairsoft]

What size battery you been using

[@wyshtechairsoft]

I mainly use 11.1v 25c 1100mah lipo if the amperage pull is low enough.

[@CodenameW0lf_46]

hey wheres the best place to buy one off these coz im lookin all over and someplaces say its aeg only and non say they work with hpa. im kinda confused

[@wyshtechairsoft]

Right now, they were only released for pre-orders. You should be able to order yours right off of Gate's website. The Titan II works for both HPA and AEG. You just need to make sure you order the right kit.

[@CodenameW0lf_46]

@@wyshtechairsoft alright cool thanks, any idea when they release ?

[@jirehvlog7562]

Compare to titan advanced version which one is better?

[@wyshtechairsoft]

If you mean The First gen Titan vs. The Titan II. The Titan II is better at sector gear detection, trigger sensitivity, and has Bluetooth built in. It also has a connection port on the board for other attachments like bolt release and mag detection. Also used for HPA applications.

[@jirehvlog7562]

@@wyshtechairsoft ok, but the trigger must use their own trigger or we can use other third parts trigger?

[@wyshtechairsoft]

@@jirehvlog7562 you can use any normal trigger

[@toby-j4v]

where should i buy this from?

[@wyshtechairsoft]

For now, probably straight from Gate's Website.

[@johnstioney1530]

Hello! I had recently taken interest in airsoft, and I was considering buying this AEG, I was wondering what tracer unit you had on during this gameplay. (Respond when you can.)

[@wyshtechairsoft]

I dont use tracer units but if you really want to get one. I recommend T238 or ACETECH.

[@alexcunningham7783]

I’m currently installing this, have solid red lights but won’t connect to my app ?

[@wyshtechairsoft]

Might be an incompatibility with your phone. Try reinstalling the app. If that doesn't work, reach out to Gate for support. They are active on Facebook and Instagram if you want to chat over a messanger.

[@michaelsmith6352]

What battery

[@wyshtechairsoft]

What ever battery you want to use up to 14.8V. 11.1v would be the highest id go though.

[@mikefd14]

Will this work with a krytac lvoa s?

[@wyshtechairsoft]

Yes, with some slight dremel work.

[@JasonFolk07]

Did you get one mike?

[@julfuentes-z6h]

Hello , can somebody help me please ? i bought a secondhands ak from a random dude at a airsoft game There is a gate titan v2 inside But i cannot find it on bluetooth How do i connect it to my phone ? It does a beep when i connect the battery. The gun shoots but i would like to play with the settings I also dont have the pin code or any other info is this an issue ? This is the first time i deal with these fancy components :p

[@wyshtechairsoft]

Best thing to do is contact Gate Customer Support. Especially for the PIN.

[@TheoTUBE-qi5zz]

There is a difference between Titan 2 V2 and Titan V2. The Gate Titan has different versions (TITAN V, TITAN V2, TITAN V3) these are for different aeg with different setups inside. If it isnt the TITAN 2 then you will need a bluLink cable from Gate to connect to your phone

[@Terminatorbart]

The app makes it easy!

[@phantomstrikegamer84]

cool video.👍maybe do video on cool customer build and there specs

[@wyshtechairsoft]

Thanks for the feedback! Ill give this idea a go.

[@aaronfranc6136]

Anyone know if I can use this with my Polarstar?

[@wyshtechairsoft]

Maybe as it does have the ability to run Gate's in-house engine. Ive seen a local guy with a wolverine engine in his.

[@christianluepnitz9559]

I am waiting for my eon titan v2 Bluetooth gearbox cabt wait to get it. Been waiting since nov 4th

[@wyshtechairsoft]

Im sure you will enjoy it!

[@AirsoftHorizons]

💯💯