[HOW TO] GATE TITAN how to Program using the Gate Control Station App

[@Angrypanda68]

Another great video ..keep up the work I know you have treats in store for us !!

[@redskullairsoft3894]

Hey thanks this video was very helpful because I just got a Gate v2 so now I know how to program my MOSFET Keep up the good content 👍🏻👍🏻👍🏻👍🏻

[@GhettoFabulous670]

Thank you! Been looking for a video in "English" talking about the usb link and how to use it or what it is for. I had a hard time finding what usb line i shoudl get for my phone and for the usb link. But now i know because of this video.

[@PheasAirsoft]

Glad you found it useful! Pheas

[@futurewdt]

Thanks for doing an English version, very helpful! Just ordered one 👍🏽

[@tkdubs2061]

I thought mine came with the usb link but i guess not. I CANT wait to get one of these. Thanks for the tutorial bro!

[@PheasAirsoft]

You are more than welcome. The basic edition doesn't come with a usb link, but the advanced does. Pheas

[@scoredcurtis]

@@PheasAirsoft if you have the basic edition how do you still get to do this?

[@Andyontheps4]

Nice clear video with lots of info. Thanks

[@VigilSerus]

So I'm curious, as you said you fired that model earlier, your nozzle is all the way pressed in and the piston is in fully too. Not sure if that's the intended effect but I got finished setting mine up the other night and its doing that same thing. I'm going to go out and guess that this is normal and totally fine? Just curious cause I feel like the tappet plate spring would weaken being in that state that all the time.

[@PheasAirsoft]

Hiya. It should return to the front once it has completed a cycle. I believe in this one I couldn't remember if I had been messing with pre-cocking or if it was a software issue. But make sure the software on the titan in up to date and it should always ensure cycle completion which means everything goes back to fully extended out the front with the piston forward as otherwise it can and does put pressure on the piston and tappet. Pheas

[@thewinchester8996]

so all you need is a dean connector on your gun and that usb link and thats it? it reads all those other parts without any sensors or anything on them? i wanna do this to my gun i just dont know if i have to get a thousand parts for it

[@PheasAirsoft]

Hiya. The usb link will only read the sensors of a gate titan (and gate aster). The usb link allows you to customise the settings of the gate titan installed so you can fine tune the performance and features you want and use. Pheas

[@TheGamer-cy9ln]

If you set your trigger sensitivity to 2 will your trigger stop right when it registers and shoots the bb or will you still be able to pull it back more?

[@PheasAirsoft]

Hiya. The trigger will still travel but the MOSFET will start firing as soon as the trigger moves to level 2. You could install an adjustable maxx trigger and tune it to have a tiny trigger pull with the sensitivity 2 setting meaning it will physically stop as it triggers the mosfet firing. Hope that helps. Pheas

[@TheGamer-cy9ln]

Damm that was fast thanks!

[@MidwestAirsoft116]

Does the USB link that you have to buy separately come with the USB C to Micro USB cord?

[@PheasAirsoft]

@@MidwestAirsoft116 yes it does. Pheas

[@BMWF900R]

Hello thank you for the videos they are very helpful. I go KWA T10 with Gate titan V2 Bluetooth version. I have trouble with it. reads all the sensors as it’s should however when I fire got only burst mode no meter were is the selector with very strange noises beeps comming from the motor etc. also showing issue with sector gear as is dirty etc. Gate telling me there is KWA mode were I have to switch too I never seen that in the menu any inputs will be great thanks

[@PheasAirsoft]

Hello, I believe this is a firm ware issue, someone i know had a similar issue, there is a fix now issued I think and you can set it to "KWA MODE" (or similar, cant remember exactly) but that will resolve the issue. Pheas

[@BMWF900R]

@@PheasAirsoft Hello thank for the replay I did work it out in the end basically issue is with IOS devices. For me did help me to down grade to 01.68 as their latest update not working well with iPhone android is fine

[@billygoodwin6295]

Where did you get yours from and how much do they cost roughly

[@PheasAirsoft]

Hiya. The one in this t6 wasn't mine. But the last one I bought I got from Amazon. For the basic I've paid about £85 and for the advanced edition I've paid about £130 for it. Hope that helps. Pheas

[@denzelnoesi9237]

A Quick cuestion mate, can u change the rps? Wonderful video

[@PheasAirsoft]

@@denzelnoesi9237 hello! You can adjust the rate of fire in percentages to find where suits your needs, so if it's running a bit too many rps then you can tone it down, it's set to 100% rof at the initial install. Pheas

[@denzelnoesi9237]

@ thx mate

[@llspacemonkeyll]

Do this advanced version replaces the need for the programming card?

[@juangaytan8467]

No, the program changing the settings and other things without having to rip apart the gearbox

[@Spedazn]

Do you need a usb link or blu link in order to safe semi and full to work. I have a Kwa eve and after installing it the motor just buzzes continuously on full auto but safe and semi works fine. Also do the other stickers in the install kit work fine since I messed up the the 2 middle ones… I forgot to file down the gearbox. Thanks

[@PheasAirsoft]

Hiya. The motor shouldn't buzz constantly, that suggests an issue somewhere. The usb link isn't always needed for the selector calibration, but I sometimes find that they are off , so have to be calibrated. If the motor buzzes all the time it needs checking over, the usb link would be able to help error code reading to see the issue. Pheas

[@PheasAirsoft]

Also the other stickers should work, but probably mean you need to calibrate to accomodate the change of sticker. Pheas

[@Quantenchompelopel]

i just received and installed my first titan ever (only couldve done it cuz of ur vids, theyre extrememly helpful), it is a v2 advanced, it came with 2 of the same double-male micro-usb cables which i cant use cuz i dont have an andriod and i dont know anyone with an andriod lmao. im wondering if im able to use other branded cables or will this not work, ive tried using these other cables with the link and my computer but to no avail, i get a blue light which im unable to fix by downloading drivers or updating firmware. any help would be greatly appreciated.

[@PheasAirsoft]

Hello! You should be able to use other brands of cables (provided they are not "just for charging") , so a USB A type to micro USB would be spot on for connecting it to your computer. Alternatively... you could buy the blu-link and use that to bluetooth it to your phone / computer. Pheas

[@Quantenchompelopel]

@@PheasAirsoft thank you so much for your quick response. just ordered right cable from amazon, i rly appeciate u reaching out it means a lot. keep up the great work on the video's they're extrememly helpful. i cant wait to get the cable and be able to use this vid to program my v2. much love

[@rowan5924]

45ms trigger response? Wow that kwa stock motor must be pretty bad. WAIT WHAT? 28Amp draw? Im getting a 25ms with way less amps. Nice video trough!

[@ChArLie360115]

I'm getting 45ms response with no pre cocking and about 25A semi draw. 9.6A auto draw. Is this bad? 13:1 and 22tpa

[@BonesGaming]

When purchasing the USB link, Does it come tiht the connector and micro USB - USB C cable or is it just the Deans connector?

[@PheasAirsoft]

Hello! When you buy the USB link it has the little block that goes onto the deans connector that then gives you the micro usb out, it also has the micro usb to usb c and the micro usb to micro usb cable as well! Pheas

[@BonesGaming]

@@PheasAirsoft Thanks you so much for letting me know, i was convinced that the USB link was just the block with the deans connector, And I hope to comeback to the channel for more reviews and content!

[@PheasAirsoft]

@@BonesGaming you are more than welcome!

[@BonesGaming]

@@PheasAirsoft Since I last watched this video 3 months ago, I have ordered myself a gate titan, and this review was VERY helpful in making my decision, keep this good work up and I hope you manage to help many more people with your amazing reviews.

[@hypeNT500]

Is the aeg supposed to fire right away after installing the gate titan or does the mosfet need to be programmed first

[@PheasAirsoft]

Hiya, It benefits from having the selector re-calibrated before use, but should just work out of the box with a set of standard pre-set settings. Pheas

[@m1a1abramstank49]

Can you use this programming wire on a GATE Titan basic?

[@PheasAirsoft]

Yes, it just doesnt come with one (but really should) pheas

[@VAirsoft]

My MOSFET gate v2 wont enter trigger programming mode no matter how long i hold the trigger for. I dont have a USB link or bluetooth link, is there any way i could fix this?

[@PheasAirsoft]

Hello, it might be that you have to get the usb link... could be that it is slightly mis=-seated so not detecting the trigger movement properly? The easiest way would be with a usb link though if you can get one to borrow or use. Pheas

[@bigal8787]

I've got to get one of these

[@michaelr687]

Does the basic module come with the cable to connect to your phone

[@PheasAirsoft]

Unfortunately not. You will need to buy the usb link and the cable. Or the usb link can be connected to your computer and run their software from your computer. Pheas

[@michaelr687]

Pheas Airsoft on the basic can you still fix the trigger sensitivity that’s all I care about

[@PheasAirsoft]

@@michaelr687 Hiya, yes you can. That's included in the basic functionality. But the fixing the trigger is only sensor based, so it detects how far you have to pull the trigger before it fires. The trigger will still have more travel after that point . Pheas

[@michaelr687]

Pheas Airsoft so I would need the advanced to use the precook feature on the trigger

[@PheasAirsoft]

@@michaelr687 yes you would unfortunately. Or the expert software (a further software upgrade done in the app) go get crazy amount of control over that and all the functions. Advanced is pretty much enable or disable a feature buy then in expert you can fine tune things even further. If you download the app you can "preview " each set up type and see the options available. Pheas

[@nikmar1338]

I want to get the titan basic, but I don’t know if the usb will fit into my computer. Also does the Gate control station app come right up when you plug in the usb?

[@PheasAirsoft]

Hiya. The basic version doesn't come with the USB link at all, so you will need to buy that to connect the titan to your computer. One of the cables supplied is the micro usb (which goes into the usb link) to USB A which is what will connect into your computer (I think all computers have at least one USB A (a normal usb connector) ) I think you have to open the app and it will recognise that it is connected to your computer and load in the settings and look for updates for the software etc and allow you to program it up. I hope that helps! Pheas

[@nikmar1338]

@@PheasAirsoft thanks! Can I buy the usb link anywhere?

[@PheasAirsoft]

@@nikmar1338 Hiya, Yes you can, its available online, where abouts are you in the world and I will find you a link. Pheas

[@nikmar1338]

@@PheasAirsoft I’m in the USA. Also thank you for responding so quickly and helping me out!

[@PheasAirsoft]

@@nikmar1338 you are very welcome. www.evike.com/products/67118/ here is a link to evike in the US who have it. You need a usb A to micro usb cable (the kind you get with a Kindle fire tablet or older Android mobiles) alternative if your computer has a usb c connection, then one of the included cables with the usb link will comnect to that. Pheas

[@snake.airsoft09]

what do you think? about ASTER GATE v2. do you think it's compatible with KWA AEG 3.0... my english it's not so good... sorry

[@PheasAirsoft]

I really like the aster. I think it is a good concept. It wi certainly fit in the Kwa series of gearboxes with no issue, even the 3.0. your English is better than a lot of English people I am friends with ha ha ha!

[@snake.airsoft09]

@@PheasAirsoft thanks... i will tried with aster!!!

[@seanhochrine1838]

I have the basic module and the second I plug the battery in, it makes 4 beeping sounds. It sounds like something is wrong. Do you know what that means?

[@PheasAirsoft]

Hiya! What battery are you running? Generally when you connect the battery is beeps for a number of times equal to the number of cells you have. So for example an 11.1v lipo would get 3 beeps when plugged in. Pheas

[@seanhochrine1838]

@@PheasAirsoft Thanks for the reply. I reached out to GATE and they told me what was wrong. The speed trigger is to close to the first sensor. I have to get a usb link and set it for the 2nd sensor. Thanks for the help tho

[@RyanTheEpic]

How did you get to the point that it would register with your phone? I couldn't manage to get a blue light from mine

[@PheasAirsoft]

Hiya. I opened the app first, made sure the cable was in the usb link then connected to my phone, it automatically accepted the connection and went through it. Are you using an Huawei by any chance? as some of the newer ones are picky about it. Pheas

[@RyanTheEpic]

@@PheasAirsoft I did exactly that with a Samsung Galaxy S9. I got nothing. I tried doing the same thing on my my Windows 10 PC. I got a blue light but that's as far as I got since the drivers website way too complicated and they never seemed to work

[@barnard.]

@@RyanTheEpic same

[@MrCow579]

Any clue how to get rid of region lock? I moved and the country I live in now allows full auto but the gun is region locked still

[@PheasAirsoft]

Hello! I honestly have no idea, the only thing I could think of is to contact Gate themselves. I am sure there should / must be a way to do it. Pheas

[@TonyStark-gj3xk]

​I tried to contact Gate for this problem, but they say they cant do anything. Did you have any luck?

[@visualz9066]

do these work with every /any aegs

[@PheasAirsoft]

Hello! The Titans are designed to work with any generic Version 2 gearbox or version 3 gearbox or the TM NGRS gearbox shells, you just need to buy the appropriate model to match the gearbox type you have. Hope that helps. Pheas

[@visualz9066]

@@PheasAirsoft alr i got a few questions though so does the advanced version come with the mosfet and everything you need? or do you need to buy that sep

[@PheasAirsoft]

@@visualz9066 The advanced version has slightly better software installed on it (gives you more options of how the gun will work) and includes the USB link to be able to connect to the mosfet and change these options. You can buy the usb link separate and pay to upgrade the software through the app for the usb link. For me, the advanced offers better value as most people want to configure things to a higher level and if you don't have the usb link already then it works out cheaper longer term. Other than that both the basic and advanced have the mosfet and screws etc you need to install it into your gearbox. Pheas

[@visualz9066]

@@PheasAirsoft alr thank you

[@cedryk5376]

Got Gate Blu Link + Titan Expert Edition on my Krytac PDW M

[@cedryk5376]

+ max models titan trigger

[@insaniacs2.096]

Does it have binary trigger

[@PheasAirsoft]

Hello! Yes it is an option you can enable. Pheas

[@Airsofthelpvancouver1963]

I'm having troubles with my advanced programming on my MacBook iOS laptop after doing all of what I wanted and it's not working.

[@r3kt_addict_137]

Is it compatible with IOS cause they have the program app in the app store

[@PheasAirsoft]

Hiya, if you have the blulink adapter (they are new out) then you can use the IOS app to configure your titan / aster. The usb link isnt for ios though! Pheas

[@r3kt_addict_137]

@@PheasAirsoft awesome thanks for the response and another think is I don’t have any of the tools I need to get to the gearbox is there a link you can show me with the exact tools needed to take the gun apart

[@PheasAirsoft]

@@r3kt_addict_137 not so much an exact link. But you will need a screw driver set with a lot of different size torx and hex (Allen) head fittings to get the various screws out. www.amazon.co.uk/Draper-82399-Security-Screwdriver-Driver/dp/B01GZWT5FW/ref=mp_s_a_1_5?dchild=1&keywords=screwdriver+bit+set&qid=1614026487&sr=8-5 Something like this one that has a big range of really small to normal size is good. That should cover you for everything. Or you can go to the other extreme and get a full set like I have in this video: kzbin.info/www/bejne/hJO0mqaoarKhsKc Ha ha ha. Then you are covered for just about anything ha ha ha. Pheas

[@wolf2966]

Will this work with an apple phone?

[@PheasAirsoft]

Hiya, they haven't released it yet to work with an Apple phone, but it is reportedly in development. But they do have a version for Apple Mac or Windows, if you have a computer around. Otherwise you will need to borrow or get a cheap android handset. Pheas

[@R4G3xVIpeRz]

I have a micro usb to lightning but the app can’t see it and it won’t light up

[@PheasAirsoft]

Hiya. Have you got a computer you could plug it into to see if that can make it light up and active it? I only have access to android devices unfortunately. If it's still not working might be worth contacting gate themselves to see if they can help. Pheas

[@ltmongoose1594]

can i plug the link into my android?

[@PheasAirsoft]

Hiya. Yes you can. I have a Google pixel android phone and it works perfect on that. It's only iPhone that isnt supported as yet. Pheas

[@Airsofthelpvancouver1963]

Thanks buddy

[@satriasenaady4705]

Mantap betul

[@bairanaxscatha3364]

Titan problema tras problema,mekor lejos

[@PheasAirsoft]

Hi, what kind of problems are you having with yours? Pheas

[@bairanaxscatha3364]

@@PheasAirsoft llevo 20 años reparando replicas y upgradeando y desde que salieron los gatillos electrónicos se multiplicaron los problemas,con los titan gate he tenido problemas de bug,de bloqueos de eomoerse pegatina tappe selector y de dejar de funcionar sin ninguna razón de un momento a otro,los unicos gatillos que no suelen dar peoblema son los gyg aunque no sean tan sensibles

[@zhez5809]

呵呵

[@hypeNT500]

Is the aeg supposed to fire right away after installing the gate titan or does the mosfet need to be programmed first

[@ChArLie360115]

Bruh 😂