Between all the homemades and this,sidearms are really being taken to the next level. I’m hoping dart zone does some sort of pro sidearm soon.
@MrRimant4 жыл бұрын
You could possibly call the upcoming Aeon Pro a side arm I suppose.
@grahamturner26404 жыл бұрын
Now, there’s the Mk2
@firetroop27753 жыл бұрын
Welcome to The future
@GalacticYuna3 жыл бұрын
I recently have started loving pseudo primary's, light blasters, and sidearms
@Boomstickmods4 жыл бұрын
The ultra two is such a loved shell. Nothing like a nice hand cannon.
@abboman87484 жыл бұрын
The best youtuber is captain Xavier and the most talented one
@carsondiaz6674 жыл бұрын
Cap
@TheFault4 жыл бұрын
Oh Captain, My Captain, what wonderful timing you and GFZ have ... I've one of Gavin's UNo.2 for stock wheels kits in transit! Happy, happy days! 😀
@austinkoeppen61223 жыл бұрын
The sound the cylinder makes when it rotates is very satisfying.
@Matt-md5yt4 жыл бұрын
glad you covered Gavin Fuzzy's kit , I still need to spend some money for his Spamf kit. been wondering if you would cover his Ultra 2 kit and I am glad you did. hope you have a great rest of Sunday and week. :)
@jenimeusborn41074 жыл бұрын
I look forward to watching this Captain!!!
@srloins66134 жыл бұрын
Re-wiring a blaster twice just to compare.... hold on mosfet you say? Three times, for Science! Thanks for the dedication to give the rest of us more information.
@ZakLeek4 жыл бұрын
Thanks Captain, always a pleasure to watch!
@Burningnewt4 жыл бұрын
He has instructions with a complete wiring guide on his etsy
@RaevenKS4 жыл бұрын
This Ulra 2 elite is like... Impressively appealing to me.
@lofiespresso4 жыл бұрын
After the intro put the captions on and it says its playing music, amazing
@H3zzard4 жыл бұрын
Captain - you didn't wire it backwards initially. You were thinking of Judd and standard Australian wiring when you were soldering is all. (/s obviously)
@nicholasmazzarella27204 жыл бұрын
Captian That is a pretty cool kit. Thanks for showing us all the options. I really enjoyed it. Keep up the great work. Bangarang
@themagitechie99554 жыл бұрын
Can't wait for the comparison, or the x-strike paint jobs. Keep it up!
@donnovaninman15184 жыл бұрын
Is that illegal because of how powerful it is
@CaptainXavier4 жыл бұрын
Only in California.
@thefoolsremedy94844 жыл бұрын
@@CaptainXavier Of course it's California.
@felixmasters53424 жыл бұрын
@@CaptainXavier true
@MJHootHoot4 жыл бұрын
@@CaptainXavier don’t forget Australia.
@TheRealMycanthrope4 жыл бұрын
@@MJHootHoot oof. Too real mate
@mellifious3994 жыл бұрын
I think I will actually do that to my ultra 2. I got it and a doomlands stryfe for modification, so I may as well get started with the ultra 2 conversion
@Spartan4124 жыл бұрын
2:56 _My brain will remember that in my sleep_
@supern0v4774 жыл бұрын
The new intro rocks
@jacobjohnfaxholt30644 жыл бұрын
First I was like: Did he reupload Second I was like: he got fewer hits with the ultra darts the first time. By the time he said: "hang on". The penny dropped for me....
@oileaderboss2 жыл бұрын
Idk anything about flywheelers but i wonder if it would matter to change the flywheels like to worker grooved smooth or like twilights
@parkertown22294 жыл бұрын
You are truly awesome
@matheuxaguirre8384 жыл бұрын
Yes! Was waiting for this video
@tv-pp4 жыл бұрын
Love the intro
@blobfishiant84872 жыл бұрын
I’ve weirdly come to find that A.F waffles tend to jam this kit pretty frequently. I suspect the heads are too wide for the barrels to feed correctly. Full length A.F pro darts and full length max darts feed without issue though.
@CaptainXavier2 жыл бұрын
Huh, something must be up with your kit because I have never had mine jam.
@blobfishiant84872 жыл бұрын
@@CaptainXavier right you were. As it turns out I had neglected to screw in the flywheel cage properly… I wouldn’t have thought to check that had you not mentioned that abnormality, so I thank you
@Boomtendo4tw4 жыл бұрын
Just needs a BOOMco kit for more capacity and longer range.
@bobbillboard97644 жыл бұрын
Half length darts maybe?
@jodiac4 жыл бұрын
Ooooooh that sounds like a monster if we could place in some of the spinsanity flywheels into it!!!! how many darts do you think would fit? 16? 18?
@dleonidae4 жыл бұрын
Considering where people go with flywheeling, the straws may not actually do all that well.
@Boomtendo4tw4 жыл бұрын
@@dleonidae straws do really well in flywheels. they shoot farther than foam. I recommend daybreak or twilight wheels
@rageman64204 жыл бұрын
I once thought of buying an Ultra 2, then I heard how bad it was, maybe I will get it with this!
@fogbattleshipyamato9173 Жыл бұрын
Question i want to just change the capacity of the revolving chamber, so my question is: can i just swap the cylinder without changing the batteries or the flywheels? the bump that blocks the dart i can find a way to take it out note: i have never modded a single blaster before
@CaptainXavier Жыл бұрын
Batteries, yes. Flywheels...also yes...kinda. You can keep the original motors and wheels but you do need to replace the flywheel cage. Otherwise the spacing on the wheels will not be right.
@nickdavis54204 жыл бұрын
I still need one of these I gotta make the Good Samaritan
@exclam8ion4 жыл бұрын
Here's an amazing mod idea: The Rival Charger MXX 1200 with the Rival 12 round magazine, which makes it become sort of like a p90
@cameronstevens33004 жыл бұрын
Representing for the left handed bois!!! Thanks chaylo
@cjpunish4 жыл бұрын
You make me want to get two of them myself
@jeffro51804 жыл бұрын
Will it take a k26? That should fix it!
@theawsomeguy1054 жыл бұрын
What is the point of that circuit board that you took out?
@CaptainXavier4 жыл бұрын
Nothing. It just connects the motors.
@koenkooiman14904 жыл бұрын
Yes! Early to a video! Thank you notification!
@ima_bread8 ай бұрын
what sizing are the stock wheels compared to aftermarket wheels?
@CaptainXavier8 ай бұрын
The stock wheels are larger.
@ima_bread8 ай бұрын
@@CaptainXavier thanks!
@cavanmorber32382 жыл бұрын
Is it possible you could put a parts list in the description or suggest a couple parts that would be ideal to use on this mod? I am hoping to modify this with the Gavinfuzzy kit, preferably 2s (but I don't care too much), preferably all from OOD, but again, not the end of the world if not. I just am having a lot of trouble finding a parts list anywhere and am not experienced enough to know which motors would be best for which batteries. Anything you have to offer would be great, thanks!
@CaptainXavier2 жыл бұрын
I used the stock motors. 2s is actually below their intended voltage (7.4v vs 9v) but they should still work. Any 2s Lipo that OOD sells will work. The only other parts I used was an OOD mosfet board, a little wire, and an XT-60 jack.
@cavanmorber32382 жыл бұрын
@@CaptainXavier Thank you so much!
@B3nluke4 жыл бұрын
Hey can you put a 2s Lipo in a stock stryfe?
@CaptainXavier4 жыл бұрын
You can...whether or not you should is a different matter. It is a different of 1.4v so it should be fine. It just won't have very good performance.
@B3nluke4 жыл бұрын
Thx
@B3nluke4 жыл бұрын
Will a 1s be best I want stock performance
@B3nluke4 жыл бұрын
I want to put a stryfe in a elite alpha trooper with no cuting the shell
@theboregasms3 жыл бұрын
@captain Xavier is there a 3s you'd recommend to run with the stock motors in this?
@CaptainXavier3 жыл бұрын
Yes, I would recommend OOD's .95 3s.
@theboregasms3 жыл бұрын
@@CaptainXavier thank you so much!
@josephmorales82754 жыл бұрын
I bought one and my cylinder jams alot anybody got any tips
@JohnJames.4 жыл бұрын
Heavy trigger pull, and makes sure you're revving
@katiemeredith68704 жыл бұрын
Do you and beret go to the same wars
@CaptainXavier4 жыл бұрын
Yes. Also WalcomS7, Luchathor14, Out of Darts, the Nerf Curator, Dr Pews, the Jankmeister, and Dr Flux. We have a lot of cool Nerfers in this area
@katiemeredith68704 жыл бұрын
That’s crazy
@kennysnapp87982 жыл бұрын
Can someone please send me a link for a kit like this but not on Etsy? Please and thank you!
@CaptainXavier2 жыл бұрын
As far as I know Gavin Fuzzy only sells thru Etsy. If you check my review on the other kit (from Australia) I think they are not on Etsy. But you jave to pay for shipping from Australia...
@kennysnapp87982 жыл бұрын
@@CaptainXavier thank you Captain semper fidelis
@-e62124 жыл бұрын
Can u do a nerf for science vid for belt fed blasters plz :)
@CaptainXavier4 жыл бұрын
And cover what? That is a very broad topic.
@-e62124 жыл бұрын
Captain Xavier which ones best
@CaptainXavier4 жыл бұрын
Based on what metrics?
@-e62124 жыл бұрын
Captain Xavier sock FPS, firing speed and reloading speed . All stock (+ tyr )
@CaptainXavier4 жыл бұрын
That isn't Nerf Science. That is Slightly Unfair Reviews. Also which belt blasters? There are at least a dozen that I can think of.
@trinubisataurus4 жыл бұрын
I was about to go back and look.#deja vu.😂
@0091cram2 жыл бұрын
Where can I get this mod kit
@CaptainXavier2 жыл бұрын
Link is in the video description.
@schmollioli94744 жыл бұрын
I have a question about the pusher mechanism. From what I can see in this video, the install instructions, and the other video, it seems like the pusher wasn’t modified. I know you mentioned an extended pusher form the AUS blastermods, but I’m wondering how much modification for the pusher is needed to make sure these conversion mods work. I know you mentioned that for the GavinFuzzy a full trigger pull is necessary to make sure it doesn’t jam, so is there a work around for that? The reason I’m asking this is that there’s another conversion on Etsy by Rad Blasters that includes a new pusher to make the timing work, and I don’t really understand that. I Igor just be missing something, but I would like some clarification before I get a kit
@CaptainXavier4 жыл бұрын
You have to remove the ammo lock but other than that no modification is needed for the pusher in this kit.
@schmollioli94744 жыл бұрын
Awesome! Thank you so much! I appreciate it and your videos
@VexCoast3 жыл бұрын
What lipo battery are you using?
@CaptainXavier3 жыл бұрын
You know I don't remember...I thing it is the .95 3s Out of Darts sells...might be the 2s. I don't remember what motors I put in these now...
@rocker41444 жыл бұрын
This is neat
@LadyKaira2 жыл бұрын
Got one of these kits awhile back and got a new ultra 2 to put it in… Damm thing’s screws were all stripped, the new cage was too big for the blaster just… a whole issue. Definitely more to do with the Ultra 2 though… which is sad
@darmanskirata41674 жыл бұрын
so far so guood
@supercow614 жыл бұрын
I will like short darts in this blaster !!!
@CaptainXavier4 жыл бұрын
You might be able to if you double load them. It would only fire one but it should work
@CaptainXavier4 жыл бұрын
Or a different cylinder and a long pusher. Might make it hard to load.
@neolancer0054 жыл бұрын
With more fine tuning I bet it would make a good revolver rifle. Look up KAC supressed revolver rifle
@lokimoonwing35984 жыл бұрын
Imagine making this full auto, now i do know that there is most likely no room for a fullauto system but it would be interesting to see
@CaptainXavier4 жыл бұрын
It could probably be done.
@alexandermacphearson43794 жыл бұрын
Captain Xavier: as a wise sage has stated many times. With enough epoxy anything is possible
@kyles.82254 жыл бұрын
The Barricade walked so this mod could run
@CaptainXavier4 жыл бұрын
Oooh...well said sir!
@The_RC_Dude4 жыл бұрын
Hey cap, why don't you use a electric screwdriver to get the screws out?
@CaptainXavier4 жыл бұрын
Because.
@The_RC_Dude4 жыл бұрын
Hmm, I see
@globalrevolution4 жыл бұрын
Want to test a third kit? The one Pim talked about? :D
@williamwinder34664 жыл бұрын
Wonder if there's a way to make it belt fed... 🤔 🍕🍔🍟🌭🍿 because I'm hungry.
@EDSKaR4 жыл бұрын
Any revolving cylinder system can be modded to be belt feed. redesign the cylinder piece to make it a spindle for the same number of locations, but instead of holding a dart, it holds a link in the belt. Then design a belt link that fits each cylinder location, and holds a dart. Now make a lot of links. If you take apart a vulcan, you'll see it has a 6 position revolving sprocket, and the belts fit into the sprocket.
@thisaccountisntreal1074 жыл бұрын
I got the other version of this kit that floats around because this one was our of stock It's crush is maybe too much with my flywheels Oh that's the other thing; the other 3d printed kit available won't use the original flywheels or motors
@CaptainXavier4 жыл бұрын
The other one I reviewed does have the option for stock wheels and motor. I failed to mention it in my video.
@7kAndyy4 жыл бұрын
i really wanna see a select fire conversion (like a 2 round burst)
@orbit92373 жыл бұрын
That might be impossible, Since its a revolver youll need a electric cilender progressor of sorts (ignore my bad spelling) and there isnt too much space in the blaster
@ShinKyuubi4 жыл бұрын
aaaah...my biggest regret is that I have never soldered ANYTHING ever let alone a NERF blaster and I'm super scared to do so and spend money on all the supplies needed, since I don't have a soldering kit at all..I JUST got the Halo blaster and I'm fully expecting a LiPo kit and flywheel upgrade for that at some point down the pipe..I would love to run this conversion and that blaster in a game together just for the shiggles of it..but I'm terrified to ruin a $50+ blaster due to lack of experience. I really do like the look of the Ultra 2 since I love revolvers and it's a semi-auto flywheel one, but the fact the standard Ultra darts are...less than stellar as far as performance goes alongside being stupid expensive just for the sake of NERF trying to be annoying about it all..yeah I've been reluctant to get one to say the least.
@Diamre4 жыл бұрын
If you're scared to start with an expensive blaster, find a not so expensive one to practise with. Maybe you can find at a local thrift store or FB marketplace or some such. There are some good vids on here about how to start soldering, or perhaps you can find a local makerspace where to start.
@ShinKyuubi4 жыл бұрын
@@Diamre Sadly I live in a rather podunk area of the south where maker spaces..aren't really a thing and the ones that do exist are like..an hour+ away. Finding a cheaper blaster isn't really the problem if I do go thrifting..not something I normally do mind you but I can do since finding a Goodwill isn't that hard and there isn't one more than like 30 minutes from my place. Also when I say podunk, most of the people in my area are older and there is literally two assisted living/nursing homes within a half mile of each other..and plenty more around and about.
@JohnJames.4 жыл бұрын
@@ShinKyuubi just watch you tube videos, and try on scraps
@ShinKyuubi4 жыл бұрын
@@JohnJames. Well..anyone have any decently priced good solder kit recommendations for someone just starting out?
@jakebordenca96834 жыл бұрын
ShinKyuubi i have a versa tool that works as a hot knife, a wood burner, and a soldering iron. You can get them at Michaels (or many other craft stores) for like 40 bucks and then a spool of solder with integrated flux is around 5 to 7 dollars.
@thefoolsremedy94844 жыл бұрын
Okay, here me out: Ultra 2 - Elite Darts - Sniper.
@dudeinaredscarf21574 жыл бұрын
but it's a flywheeler
@thefoolsremedy94844 жыл бұрын
@@dudeinaredscarf2157 Did I Stutter?
@forcenoirstudios95884 жыл бұрын
I was like... "wtf? I allready watched this video" *lol*
@alexanderthegreat2080 Жыл бұрын
This is what the Max Outlaw should have been.
@isaaclawson93554 жыл бұрын
Hi
@CaptainXavier4 жыл бұрын
hi
@isaaclawson93554 жыл бұрын
@@CaptainXavier how are you?
@matthewbertram43124 жыл бұрын
Did you just say something about AF Waffles that wasn't 100% referring to them as ammo from god?
@CaptainXavier4 жыл бұрын
I did...you got a problem with that? ;P
@matthewbertram43124 жыл бұрын
I don't, but I'm pretty sure you just set off the anxiety of a whole mob of foam flingers who use "waffles or nothing" as their full length dart manifesto
@SirBrass3 жыл бұрын
@@matthewbertram4312 AF waffleheads are flywheel ammo from God, but being in a sinful world, they fall short 😛
@donnovaninman15184 жыл бұрын
Hey
@flappybirdplayer292 жыл бұрын
I want a kit, but they are ridiculously expensive for what they are, I got two ultra 2s and extra darts for the price of one of those kits and I'm not about to spend $80 extra dollars especially when I have to solder and stuff. if only ultra darts were good smh
@gdfish35324 жыл бұрын
wish he'd sell the files for this. I'd happily spend like $20 on them. ordering a kit like this is a hard sell for me since I have a 3d printer. might just have to design my own :/
@Kaythena4 жыл бұрын
Comment!!
@stryfer62112 жыл бұрын
next : drop cylinder mod .... and it will be the top on the battlefield
@finnmacleod37744 жыл бұрын
Thank God... can't be bothered with rewiring crap
@Oneeyedhistorian4 жыл бұрын
Hey capt x you should do a build of just thrown together parts from around the shop.
@okey72614 жыл бұрын
Intro
@elijahburley52654 жыл бұрын
Can it take a k26 episode should be about the nerf basr. L
@darthvader30274 жыл бұрын
Have you ever thought about building a deplorable
@CaptainXavier4 жыл бұрын
Yes
@darthvader30274 жыл бұрын
Captain Xavier cool thanks for replying you really made my day
@jaspera69084 жыл бұрын
"mmmmmmoist... what an atrocious word"
@GTA_5004 жыл бұрын
It's terrible because that's the only flywheel blaster Walmart sells other than the Justice horrible fortnite assault rifle