CBR400 P4 Brakes - Strip, paint and rebuild

I have moved onto the brakes. In this video I will strip the brakes down, grit blast them, then after I have given them a resprayed I can rebuild them with all new parts.
How brakes work - • Pull that lever
Biker Stuff merchandise - rdbl.co/3oqGmPF
Twitter - / girlybikerstuff
Instagram - / girly.biker.stuff
Rumble - rumble.com/sea...

[@dwightsoon4764]

A voice of an angle and just as beautiful 😍 lots of love from Canada 🇨🇦 ❤️

[@AndrexT]

Greetings from a Brit in Toronto!

[@baitken766]

I appreciate your technique on piston insertion. It proved to be extremely helpful. Thank you for all your hard work!

[@SuperLoghauler]

Thank you Dana. Exceptional video. Can never get enough of your special mechanical wear. Keep up the excellent job. ❤❤

[@WindpowerWaikato]

Hi Dana, watching your last couple of videos, I realized how much, I really really needed, a grit blaster. So while casualty browsing in the tool shop today, a blaster accidentally fell onto my trolley, along with a bag of glass grit. "Glass is better for the environment" they said, So I felt much better, now that I am saving the Planet. My Grit blaster is red so it will go faster and it will be easier to find in the wilderness, I call my work shop. I always learn some thing new, from your videos, you are a great motivator and you all ways achieve a high standard, in every project, you do. I love to watch the bike shows you go to, and enjoy the classic bikes on display, being a 79 Yam XS 1100 owner my self. Your partner is good on the camera, please pass that, on to him. I have watched many videos of bike shows and mostly the camera person sucked for various reasons. Keep up the good work. All the best, Colin, in Hamilton, New Zealand

[@bikerstuff2]

I have been using glass recently and I would recommend wearing a respirator no matter how good your extraction system filtration is on your blast tank. I saw another KZbinr recently using the same SGS tank without any extraction and complaining about how he couldn't breathe. If you'd like to see how scary it is, watch Bikes Of Rye.

[@WindpowerWaikato]

@@bikerstuff2 Thank Dana, for some more, very good advice, I did not even think of the dust. It looks like another trip, to the tool shop for a good extration system.

[@bikerstuff2]

Watch my video from a couple of months ago when I first got the blast tank to see what modifications I do to it.

[@Heyyou2me]

Always a pleasure watching you work

[@AndrexT]

I am a bit behind Dana, but nice job, prep, sandblasting, spraying and reassembly. I lolled a bit at 'rubber grease'. Who knew such a thing existed.

[@geoffreyhattersley9186]

Extremely educational! Even if you have to keep watching to take in all the bits you missed. Thank you

[@clivebroad9542]

Oh yes Dana I certainly do appreciate the detail that you have gone into and yes I also appreciate the outfits that you have chosen . I like the black top but absolutely love the white one , especially when you are greasing and inserting the pads. Thanks once again for making my day ❤

[@martynwylde288]

i agree but her arm was in the way

[@bikerstuff2]

Visit my twitter page

[@drost582]

Nice to see another Canadian fan. You make that look easy. I use dielectric silicone as a brake lube on sliders, a habit from working at Ford dealer. This is Ford recommended brake lubricant. The caliber looks brand new!

[@bikerstuff2]

Yes, I am pleased with the results

[@fry5family]

That was the most enjoyable break caliper rebuild I've ever seen.

[@ma_rin_49]

Easy to follow you doing another expert job refurbishing that caliper Dana, the only prominent distractions were no doubt well received by your audience, well done with everything!

[@nigelmouland]

I have never watched some thing so intensely dana definitely eye popping ❤❤

[@E.Kim_Style]

Always informative...and Dana makes the videos more beautiful...& uplifting!!

[@johnhowell316]

I’m afraid my frustration level would have gone through the roof! As always, thanks for the beautiful smile Dana!

[@glennspreeman1634]

Lovely hangers!

[@bikerplusone]

I have never enjoyed rebuilding calipers before and never thought I would be watching one. But, I truly enjoyed watching this and actually was fumbling with my own fingers in mimic of your work. Bravo! I hope you wander across the pond to visit us soon!

[@DonWright-zt1ql]

Dana you would never have to force me to watch your excellant instructional videos...fine details and points thru out .lòoking forward to seeing more.thnx again

[@armandplaisancejr8937]

Dana u show me more and more why I love watching your videos. Dana I love how u break everything down 2 us step by step.

[@danflowers454]

God i love watching you work!

[@lloydbethel252]

Another awesome video, Dana. I really enjoy watching you work, your tips and pointers are so much help

[@markstone7140]

Delicate work pushing the piston into the caliper, had to watch again

[@allentrader3181]

Great video you just showed bikers calipers are not hard to rebuild I do ones for cars and trucks again thanks

[@wolfman6000]

Awesome Job ! I know how hard it is to remove the pistons and reinstall the seals.. They look Great !

[@eziotaddeo1726]

Hey Dana Yep! I did like it (good job). This baby will look the part! when it's done, another gr8 ep. Look forward to the next one. Cheers

[@richardhoneywell7411]

Great video Dana really enjoyed watching you rebuild that brake caliper. Thanks for sharing stay safe Dana.

[@Yorkshiremadmick]

Fantastic strip Down Enjoyed every second.

[@cD-vg5go]

i always always file my pins when servicing, they often get a edge cut into them... Luv Ya!!

[@rhodsullivan7773]

Such a clever lady you are. I would not know where to start! 😊

[@alexgrant4216]

Super work as always and brilliantly done 😀👍 love the white T-shirt 😊👌🏻😉🤍

[@markeyre5004]

Morning Dana, very well presented, very informative, you look fabulous as always ❤❤

[@zakadam154]

I pleased that the jugs did not get in the way. Beautiful

[@richardbarreau2844]

Enjoyed watching your mechanical skills.

[@mohamedbekhit835]

Loved 13:00 now 13 is my lucky number 😙😙😉

[@ms.annthrope415]

Tasty bits.

[@blackiedekat2612]

Best side-boob in the female motorcycle repair videos genre ive ever run into......................so far!

[@eddiem.chavarria7389]

Nu​@@ms.annthrope415

[@derekskinner]

You need to watch her "other" videos--you will cream your pants..

[@ghegun]

Great video Dana, calliper work can be very tricky !! Do love the side angle camera views too :)

[@joeq.public281]

I like the side8008 in that singlet 😻

[@joesmith1926]

You’ve got the lot, Dana! 🙂

[@patrickdelneste9910]

Très intéressant l’astuce pour enlever les pistons avec l’air comprimée 👍

[@bikerstuff2]

It normally works much better and much quicker than that

[@jasaanderson7221]

Defo got that wonder woman thing goin on with the glasses Another well explained video

[@andymoorhouse8820]

Nice rebuilding ❤

[@randyhartel1558]

Awesome video! Loved your shirts! 🥰❤️

[@RobertSherwood-n6y]

Love your work outfit.

[@charlesfritz7131]

Very eye opening angle of reinserting the pistons.

[@bikerstuff2]

Thank you. It's not an easy job to see, I hope you managed to see it clearly

[@jerrysimpson809]

You are so F-N Awesome .. I could never get enough of you ...

[@bikerstuff2]

Thank you

[@yoda68zac11]

I do enjoy a grand chameo. Always leave them wanting more, as they say 🎉

[@ms.annthrope415]

We want more side views!

[@bikerstuff2]

I hope you find what you want on this channel

[@dondumo3152]

Try 13 min mark because video will be deleted I'm sure.

[@ronsbeerreviewstools4361]

Another fine video, I like your shirt, Cheers !

[@geoffreyhattersley9186]

13:00.and everything becomes clearer. Thank you

[@thomasedward9065]

Great video has always would be nice to show how or what you used to mask off and watch you bead blast the parts also what paint you used but great video dana 😊

[@bikerstuff2]

I masked the cylinders with foam tape, the black was a high temperature satin while the bracket was just clear coated to retain the bare metal look.

[@steph-vintage-collection]

merci 🥰🤩👍

[@fulton92503]

very good !

[@jonchilds1637]

Can’t help thinking that if you’re going to reveal that level of (lovely) ‘detail’ you perhaps should have a Molly Hatchet song as your theme tune! Flirting’ with Disaster anyone??!!

[@Deploracle]

I see the word Strip in the title and it's an instant click.

[@blackiedekat2612]

Ditto!

[@MaleneH.T]

Ohh yes..

[@terrysmith8714]

Wonderful so nice 13:00 .

[@andywalker4599]

Wonder who else noticed 🤣

[@stumurray2926]

Love my bikes.Havent rode on for a while .Had a crash that really screwed my leg .Still love watching you though.All Woman😊

[@skipwilson5086]

Riveting as always

[@SS-ym1hd]

So Gorgeous

[@fabioromano1946]

❤❤❤

[@jeffreypalmer7294]

I'm broke, will someone buy that lady A battery operated screw driver.

[@timrichmond1733]

That was great😅

[@davenorfolk328]

Need to see the 18+ site!!

[@johneaston5329]

Can I ask what paint you used on the calipers? I’m assuming it was brake fluid on your gloves but it didn’t seem to affect the paint. I need to refurb mine on my 350LC

[@bikerstuff2]

I used simoniz vht black as an undercoat then finished with trailer made tailored paint satin black ht paint. I cleaned the callipers with black cleaner afterwards to prevent any long term degradation of the paint from the brake fluid

[@royjennison3916]

yessssss xxxx

[@russcattell955i]

The sleepy time sound effects could have been made by a weary Beagle !

[@forrestlane5292]

You are a beautiful English lady.I know there are many comments about your top. But let me just say that your bottom is just as appreciated

[@vodonnell1]

Yuemm yuemm!

[@y0o7u1t2u6b6e]

You need a disclaimer like those "try on hauls'. Nothing wrong with a little (big) nip slip when working on a bike.

[@redrock1963]

I'm here to watch Dana Strip, paint and rebuild............

[@no1init253]

⭐️⭐️⭐️🌟⭐️🌟⭐️🌟⭐️

[@nickb5391]

Those pair were certainly didn't want to pop out

[@bikerstuff2]

You aren't wrong. No matter how much air I blasted into the calliper, they did not want to fall out

[@nickb5391]

@@bikerstuff2 Dana, I've rigged up a master cylinder before on car brakes & managed to get them to pop out, also using a little bit of heat

[@bikerstuff2]

Sadly the brake system was dry so I wasn't able to use hydraulics to push them out, but a pair of pliers helped a lot.

[@chriscars3578]

Omg Dana they r so close to falling out 😍and you definitely know your stuff

[@Biffo88]

You are just so lovely

[@addictedtowarthunder4610]

I love you

[@geraldfitzgibbon7428]

On day 2 ur right arm kept geting in way

[@bikerstuff2]

Sorry

[@michaelbuehler9984]

Hi 😜😁🦋💋❤️🎶🎷🌞😘

[@williamwoldt2174]

😍😘💋💯❤❤❤