GE Electric Range - burners not working repair - DIY step-by-step Switch assembly replacement

General Electric Range - burners elements not working repair - DIY step-by-step Switch assembly replacement
In this video we are going to repair a GE electric range; the front burners elements stopped working and we are going to go through the process of replacing the switch assembly.
All the necessary steps are shown here.
Subscribe here ! : bit.ly/3fGzTK5

[@wademcisaac5298]

Best video ever , very detailed every step.Thanks !

[@nntechchannel1640]

Glad to help.

[@albertojquintero75]

I was looking for a video to replace de burner and as soon as I saw yours I run to buy that ratchet, AMAZING. and also the video help me a lot. Thanks

[@nntechchannel1640]

Hello, glad to help, please don’t forget to subscribe if you liked the video.thanks

[@k.dowdel338]

What brand is that amazing ratchet?

[@albertojquintero75]

@@k.dowdel338 you can find it as "Rotator Handle Ratchet"

[@sunny3560-e6y]

My GE profile stop working after 16months, this video can be very helpful for me

[@nntechchannel1640]

Glad to help, please don’t forget to subscribe if you liked the video.

[@bigfan6016]

Thank you for posting this!

[@nntechchannel1640]

Hello, you are welcome, please don’t forget to subscribe if you liked the video. Thanks

[@butchc9226]

Thanks this helped me replace my element. The only problem I had was the connector to the hot stove light broke off 😬 but I just soldered it to the element connection. 😂

[@kaltrex9465]

So I know others have problems like this too, like one outer burner and one inner burner stops working. Because it’s metal 3 people I know felt a shock when touching the Metal bars upon turning on the stove/oven. GE will answer for it.

[@pastexit]

My issue is all burners and oven not coming on. No burner light. But the clock works and control panel seems ok. Any ideas?

[@latifagentil4004]

Thanks for this video. It's so intersting 🙂

[@nntechchannel1640]

Your are welcome, glad it helped you :-)

[@grontek]

Thank You

[@TorontoDrivers416]

I have a GE stove and 2 of my burners were bad. each burner cost $200 bucks.. and a new stove cost $700..

[@nntechchannel1640]

Hello, i was in the same situation with an LG many years ago, and i just sold it for parts.

[@lightitrun5209]

What caused this problem? The wires and connectors got so hot they melted and discolored. Almost looks like too much current flow for the wires to handle. What was the stove circuit breaker rated and was the feed wire to the stove the proper gauge for the stove and the breaker?

[@nntechchannel1640]

Hello, i think it’s a known problem for this brand, i know other people had the same issue, the breaker is a 40 Amp.

[@frankoreka2900]

Does it need to be switch the entire assembly can we do just one of the switch isn’t working are it’s burned ? Nice video.

[@nntechchannel1640]

Hello, the switches are sold as a set, i am not sure if you can only buy one.

[@nntechchannel1640]

Hello, thank you for the hint, if you need a genuine replacement part, ge don’t sell just one switch.

[@soumiafikri2080]

Keep going 👌

[@nntechchannel1640]

Thanks

[@virginiebeaupre9501]

The switch assembly wires is not available anymore anywhere. I have change the infinite switch only and the burner but the front dual 12 " burner still don't work. All the other burners are working. Any suggestions to change only the wires?

[@thundermicelouie5787]

Get a new stove. NOT GE.

[@kaltrex9465]

My inner ring doesn’t work but outerdoes. Any idea of Button codes? S980s t3ss

[@nntechchannel1640]

Hello, it could be the inner heating element, in this case you don’t need to replace the switches.

[@ericpanda]

Thanks for posting this video. I have a GE cafe series electric range, and one of the elements isn’t very responsive: if I need to turn max, I need to tweak the switch for it to light up. Do you think it’s caused by the same issue? Thanks again

[@nntechchannel1640]

Hello, there is a good chance the switch have an issue, check if there’s any sign of burning on this switch. Please don’t forget to subscribe, if you liked the video

[@ericpanda]

​@@nntechchannel1640 thanks! is it possible that the wire connection behind the element is loose, in which case i just need to "cut and strip wire, attach new connector and crimp"? Replacing a wire connector feels easier to me, but if i needed to eplace a switch like you showed in your excellent video, my clumsy hands are likely to make things more wrong...

[@fathersammy3621]

Can you tell me the part number of the set switch assembly that you ordered ? Thank you

[@nntechchannel1640]

Hello, WS01F07219

[@owenzmortgage8273]

My GE profile electric range 7 years old, burner s have problems 3 times, I can’t fix it anymore , even I replaced burner elements and switch. I don’t want learn how to replace wire and control panels. I will buy a LG or Samsung kitchen appliances next time.

[@nntechchannel1640]

I han an LG range before, and it was difficult to have spare parts.

[@aldopatino3332]

So I was replacing an element on a range because it wasn't heating up and I forgot to unplug it and one of the 240 wires that went to the element touched the casing where the element sits and ofcourse activated the breaker and when I flipped it back the element was working again, I checked the voltage and I was getting almost none from one high voltage wire to the other then I checked the hot to the casing and there was my 240 voltage, should I be worried that the element is now getting grounded to the case or should I thank my lucky stars cause the element works now?

[@nntechchannel1640]

Hello, if the elements is working then everything is all right

[@wademcisaac5298]

Why would all burners not work . I look at the switches but could not see any burn switches. The burner indicator light come on for all 5 burners. Oven works fine.

[@bloodlocklife4524]

I am having that same issue, if you find a solution let me know, just bought an electric $40 double burner from Walmart to use in the meantime until can figure this out. Might be permanent solution until someday I replace the whole thing.

[@antoinea1937]

Did you ever figure it out?

[@wademcisaac5298]

@@antoinea1937 yes , I had a Range repair guy come to our house. The reason it happened is because I hit the oven cleaning button by accident, I panicked and tried to stopped it but the action was already started ,I will touch base with him and find out what he did to get it working. No maintenance was required, just resetting.

[@wademcisaac5298]

This guy was super honest, did not charge for the house call , we did give him money and very happy to have this range working again.

[@michiexoxosmart7725]

This is the worst piece of mess GE had ever did.

[@kjhayman1994]

Where did you get that ratchet??? What’s the brand?

[@Rado88]

You have to replace the wires and switches? Can you just replace the switches/repair wires and avoid taking the whole thing apart?

[@nntechchannel1640]

The switches and the wires are sold as a kit, i couldn’t buy them separately.

[@danielvo2190]

what is number for front left burner switch? Thanks

[@nntechchannel1640]

Hello, the part number is : WS01F01177 Please don’t forget to subscribe if you liked the video, thanks

[@hillelhalevi]

Way too much disassembly for me. I would call a repairman for this.

[@nntechchannel1640]

Hello, thanks for watching, please don’t forget to subscribe if you liked the video.

[@jwmarshall7091]

This being the case a new stove is in oder.

[@MRSTEEL15]

My new GE oven burner only one stopped working after 1 yr.......Never GE ovens ever again.....Only buy USA MADE.....Stricter laws

[@nntechchannel1640]

I had an LG oven before, it was impossible to find parts for it, LG want to send a tech , and refused to sell me the parts, at least with GE it’s not the case.

[@doriep]

@@nntechchannel1640same for Whirlpool… good availability for parts.

[@stellawint1898]

Bottom oven burner not heating

[@Pimpsteen1974]

Just buy a new one! Too much hassle

[@trust1952]

The repair will cost about $30 in parts and 20 minutes. A new oven like this is $1100. So unless you make $2,800 an hour it’s worth it. Doubt if you made almost $3,000 an hour you would be wasting your valuable time on KZbin. And btw I know you’re probably joking.

[@MRSTEEL15]

Throw it out and just buy a new brand oven 😅

[@robbieperlick7683]

Water prob leaked in and got the control bord

[@nntechchannel1640]

There was no water when i checked, many people i know had the same issue.

[@gregholmes3661]

If your doing an instructional video, speak and get rid of the music

[@nntechchannel1640]

Hello, thank for your comment.

[@doriep]

agree. everything else about this video is great - pop up text explaining the steps, not going too fast - it’s all good. my personal preference is no music bc I find it distracting when I’m stressing about a repair 😅. the instructor speaking or even no sound is good if everything is in the pop up text 👍🏼. anyway I went through about 10 other videos before finding this one - it’s the best one ty!

[@fagangirls387]

my lights are working but the stove top does not get hot on any burners

[@KevinHernandez-hy1qb]

Same did you end up fixing it?

[@fagangirls387]

@@KevinHernandez-hy1qb I opened the top and found that a mouse ate a live wire and got cooked, I cleaned it out, messed with some wires, and it came back on.