Gear Talk Episode 119: The Standard Omni

[@33WSM]

Law casually revolutionising the industry once again.

[@NoBuddyz]

Impressed how good of a deal these bad boys are! Seriously itching to swipe credit card when wife isnt looking

[@that_which_is_not]

The plastic locking buckle and riveted cuffs are hugely underrated. Both outstanding decisions 🙏

[@chilli-iceolive-abode2447]

Tbf I've used Razors buckles like that on a few different pairs of skates and I've never had any complaints. They're simple and do the job! Edit: Well they're not the exact ones Razors use, but close enough. Good enough buckles nonetheless!

[@leser1music]

Woah! Looking back at geartalk eps, they've been on the wall since episode 115!

[@BacktoBlading]

Tricky boy

[@ummmidontknow]

Stefan is the man, glad to know he’s involved! Skate looks great, excellent work guys

[@shanecoburn]

Huge CONGRATS, Law! Excited for you and excited to check out the skates!

[@BacktoBlading]

Thanks Shane! Hope we can session someday soon

[@shanecoburn]

@@BacktoBlading Would love that!

[@ShredCitySkatesKelvW]

You're the biggest tech blade geek ever, and i love it! so hyped for your new design!

[@art0nblades]

Thanks for all the additional geeky insights! I love that you made the shock absorbers ergonomic and not just flat wedges and hand them out in two different hardnesses. Nice attention to detail even in a seemingly simple part!

[@anklesoncredentials]

I can't wait to try on the 7/8 boot, or to wait for a 8/9 boot. I love that you made these skates, they look awesome. Good on you for making this come to market.

[@torinmartinez4331]

Just preordered my complete black Standard OMNI setup! Living in Utah now and the scene here is INSANE! Can’t wait to flex these out in one of 30+ parks within 100 miles. Miss the NC crew though and huge props to you and the team on this launch!

[@BacktoBlading]

Thanks Torin! Hope you’ll come visit again

[@oliTarling]

this was watching a dream come true, incredible work. sold

[@ricardozaldumbide8072]

I've just placed my order with Ivo from This Is Soul. Looking forward to receive my black Omnis! I am happy I can continue supporting you Law. Determination, hard work, passion and quality deserve following.

[@BacktoBlading]

Thank you so much!

[@DirtComplex]

As an industrial designer by trade I enjoyed every minute of this long video!. I really love all the thought you put into every small detail. Details add up to make an amazing skate. I'm not even in the market for skates but I think I might buy a pair anyway! Also love the design line between the soul plates. It breaks up the large volume nicely and adds a dynamic and fluid feeling to the skate. Definitely a unique and aesthetically pleasing feature and it even encourages customization.

[@DJCNKROBZ1]

Salute to you and your team. All them years skating and testing has paid off. I think you have designed a really great skate. Can't wait to try them. I will be buying a pair.

[@Franz_giblet]

The amount of thought that has gone into these I think they’re going to be good 👍🏻

[@eddyeffendy_]

really appreciate you are giving out that measurement for custom soulplate. guess someone could even design soulplate to even cover the gap if they wanted to also. but loving this, reminds me of old school converse red piping chuck taylors. congratulations again to you and the whole team. great week for all of us.

[@RobertAkeemGreen]

They look great! Congratulations and thank you for sharing in such detail and giving us more options to pick from. Have a blessed day

[@chilli-iceolive-abode2447]

It's so cool to see this come to fruition! I remember you saying a few years ago that building a skate would be a dream and now we're here! I've told myself to not buy anymore skates this year, BUT because of this being the first Standard drop and the whole journey I've put in a pre-order. Looking forward to trying them out, congratulations Lawrence 🙌🍻😁🔥😎

[@BacktoBlading]

It doesn’t count since we’re friends :)

[@chilli-iceolive-abode2447]

@@BacktoBlading 🍻

[@TheEinart]

This is just great, love the design and just everything. and also love the framedesign with almost a flat h-block, reminds me of the Og 5th h-block frames i love to skate flat as new. cheers, -Dag from Slack

[@Zzcount]

Dude… I hate hard boots but I’m buying shell only to try.. even if it ends up sitting in my closet I’m still happy I was able to support the project. I love the concept of engineering/design be the driving factor vs. Accounting

[@BacktoBlading]

Appreciate that! Hope the lightness converts you to the hard side

[@Hayyothhakodesh]

Hello sir i hope u get this message!!! I just watched a 12 min video with u talking about u owning snd creating standard omni skates. Ive seen ur older videos and i had no idea your the guy who does standard!!!! I own 4 pairs of aggressive inline skates but not standard. Ive had my eyes on ur skates for awhile always wondering...ive heard of heel pinch and washers that weren't done correctly..but then ive heard of super awesome feedback too!! Firstly i LOVE THE LOOK OF UR SKATES!! and having watched many of ur videos and today i watched your standard company video well definitely going to buy a pair of your skates as soon as im ready to add my 5th pair of skates which will be in a couple or few months and im doing this cuz i really just want to support ur company. U seem like a real down to earth and genuine man. And u make a great great product!!! I just want to support ur vision anyway i can. I own a razors custom cult, a razors andrew broom pro skates, the Iqon AG10, and the gawds tim franken. I'll be ready to own a standard omni very soon. I wish u amazing success on your dream. If there is anything i can do to help hit me up. Im 45 yrs old very low income due to a disability now but i had some amazing careers in modern and hip hop dance and being a hairstylist, marketing director, and a clothing line at Neiman Marcus i designed. However when i became disabled i lost everything. My life got hard very hard. But i got back into skating a year ago. I skated from 97 to 2006. Now im back. And im working on a new dream myself!!! Be well good sir and ill be praying for u and ur company and years of innovation and joy and fulfilling success!! God bless u homie!!

[@BacktoBlading]

Thanks! 🙏🏻

[@pjsanab]

Can’t wait to try these skates. Seems like it’s the future of aggressive inline.

[@CLAUSBUSCH]

New skates look amazing, congrats 👏🏼

[@jokeyxero]

Since you're releasing the 3D printing model for the base of the boot, could you sell a hollowed out version that would act like a sizing tester? They could be printed when ordered or printed via Shapeways or other services.

[@BacktoBlading]

Yes, very possible. Adding to the list

[@Habeev07]

I will consider these for sure. I like the design a lot.

[@Travis732]

Blader owed, you will get alot of support. Im so pumped about the skate.❤❤❤ you have thought about it all.

[@fredcastro4252]

You´re the best, Lawrence!

[@kevinlebronskates]

Love this. Can’t wait to test these out

[@rollforever85]

Too excited for my white Omnis to arrive 😁

[@Conchobhar]

Congrats, Law!!

[@jokeyxero]

I love the concept of the company and the skate. I love the sizing chart too, though I need another 2-3 mm on width to actually fit my wide foot without being 2 sizes too long. Another "standard" thing you could do for the community is set up videos or pages that help with painting or dying the skate parks and official tutorials for the heat molding. Trying to dig through the web to find those things is really inconsistent and the results are sketchy. Having the people who know the materials also suggest the best paints or dyes would go a long way. Also, please add that note about the width not applying to the sizing charts.

[@BacktoBlading]

I’d be worried about width, focus on the length. They fit like a 909/blank

[@jokeyxero]

@@BacktoBlading I've never worn a 909 or Blank so that doesn't help. I do have SLs though, and I need a wider boot.

[@Golani-ci6nu]

Thanks so much for your help and advice!

[@moomoochacoo]

Pre-ordering day one, gotta measure my feet though i wanna try the mediums but not sure yet. I like it snug.

[@jeffysoule2076]

I am way too stoked for these!!

[@esbennielsthorupfrandsen8869]

The version with the checkerboard tape must be the Oli Short pro version 😎

[@BacktoBlading]

It’s so funny thinking about the stuff people are gonna try to

[@podwick7222]

I wonder who's brave enough for the worlds first Denim omni 😂@@BacktoBlading

[@luedinski]

Really can't wait to try them out. I wonder if it would be possible to buy the flat version with additional anti rocker wheels.

[@davequist7710]

It is! He said every complete comes with anti. If you buy flat you get antis and technically a second set of wheels to use. Also they are the same 58 as the Chroma team 58. So they are really nice stock wheels.

[@BacktoBlading]

That’s not a thing we’ve considered, there’s only as many antirocker wheels as there are frames. Are you looking for 8x total antis?

[@podwick7222]

the flat version comes included with 4 anti rocker wheels just incase people want to try anti they said

[@luedinski]

@@BacktoBlading I just didn't know that the flat version comes always with four antis. Glad to hear that. I never skate anti rocker but live to try it out. I was never hyped so much for a new skate. 😃

[@yoyoyo4972]

so nice! congrats! cant wait to try! Is there difference between the two colors in regards to hardness? thinking of support/flex in boot and friction on plates? And is there plans on making a compass frame with longer wheelbase (like 270mm) for 80mm but with wheelwells and possibility of maybe 88mm wheel (as you described with the compass for 72mm)? Loads of thanks for all your hard work and your passion for BLADES!!

[@BacktoBlading]

I think the white are a bit heavier (like 20g) but haven’t skated them yet to test flex. Would love a longer big Wheel frame

[@bboydreaded]

My pre order is in. Thanks brother. Just one question. You said you can fit an 80mm wheel on the 70mm compass frame. Which is mind blowing. Amazing idea. What’s the max size wheel you can fit on the stock frames and stock soul plates. Is it possible to get a 64mm in there, or even better a 68mm. I want to use some bigger wheels for vert. Lol. I have 68mm Kaltic frames I can use. But if I can get the frame hight a little lower I would be even more stoked than I already am.

[@BacktoBlading]

I wouldn’t go any bigger than 60 on the stock frames, you’ll start hitting the hblock. Thanks for the support!

[@bboydreaded]

@@BacktoBlading thanksss. yeah. I didn’t think of that. Pretty obvious now you say it. Lol. Appreciate the reply and the hard work. Can’t wait for the skates

[@pouringblue7]

Will there be different hardnesses of shock absorbers? For example super hard shock absorber for big wheels skating or a softer shock for little kids?

[@pouringblue7]

@backtoblading nevermind you answered it! Hah. Sad I missed the live stream, but juggling work and being a parent was kicking my but 🤣

[@BacktoBlading]

Yeps, both in the box

[@GeorgeWPush]

I wish you would have filled the 27.5 feet market.. Guess I have to buy Shmediums

[@BacktoBlading]

They’re great for 27.5 with intuitions. Our comfort liner is more padded

[@jeffsawyer]

🔥 amazing work!

[@longtermsquatter]

If the liner has a 10mm thickness, then 20mm of length is taken up by the liner. @backtoblading, please clarify the internal length used by the liner.

[@BacktoBlading]

Our stock liner is 5mm thick, 10mm total extra girth

[@ROLL4FUN123]

Hi Law, congrats on the new skate! I will certainly get a pair although I'm right between medium and large in length which is annoying. I have an unrelated question - I recently made a a rollerblade fusion into aggressive by adding a blank soul plate, do you know if the boot compound is more soft/flexible than the blank or solo? They feel very soft but I don't know what the blank/solo are like

[@ThatShaunBoy]

I had done this, the plastic is basically the same.

[@ROLL4FUN123]

@@ThatShaunBoy I've only skated them with the velcro strap (which I didn't like). Swapped them for normal buckles last night but not yet tried 😁

[@BacktoBlading]

That’s a very flexible boot, and with the frame mounting straight to the boot it’s even more flexy

[@ROLL4FUN123]

@@BacktoBlading thanks for the reply! I'm assuming more flexible that the solo or blank?

[@laser1675]

ALSO: if one were to drill off the cuffs... how were the cuffs designed? were they designed similar or with inspiration of other existing cuffs? would LOVE if the cuffs were interchangable with other brand cuffs. woul fit right with that thought of making this skate your own with the parts that you already own and love. espcially since cuffs are a vital part of the skate. some might prefer stiffer cuffs. some might want softer material cuffs... and then some might want higher cuffs. maybe in the future you can provide these (aftermarket?) as youre providing multiple shock absorbers.

[@BacktoBlading]

I’ve never compared them to other brands, they were always designed for Omni. But I’m sure it’s possible they’ll fit great for swapping

[@1stGenRex]

Hey Law, excited for you and The Omni- will the frames and T shirts be available on the Standard Skate Co site soon?

[@1stGenRex]

Sorry if it was asked, I’m typing this at the start of watching the recording.

[@davequist7710]

He said frames and wheel will not be sold separately. Maybe on some liners. Hopefully more tshirts come out. There’s still a few on balance distribution.

[@BacktoBlading]

Yes, maybe liners but frames/wheels are part of completes only. Soft goods coming soon

[@bigda666]

Thanks for this detailed explanation of the skates, very useful! Can’t wait to have them on my feet!

[@HaikalHanafiah]

Really want to get the skates, but now Waiting a smaller size since mine feet is 24.5cm long

[@BacktoBlading]

We’ll get to it, sorry for the delay.

[@geoffreyrollsagain]

Hey Law, I am going to be getting a complete. Additionally I’m also considering getting 8 of the 56mm 50/50 wheels as my flat setup. Do you recommend the stock frame with the 56mm?

[@BacktoBlading]

I haven’t tried it to be honest. I think they’d work great but that’s not based on experience

[@laser1675]

ALSO: Are the boots ridable without soulplates when mounting big wheel/wizard frames onto them? as it is the case with the seba cj2 prime plastic boots? maybe consider this for a future iteration of your boot. id love to see a mechanism that constitutes for a rigid boot to frame connection that provides more suüpport than just ufs screws onto a potentially too thin boot footbed. maybe make this thicker and instead the soulplates thinner? just a tad of a shift to all the hardware stays compatible.

[@chilli-iceolive-abode2447]

Yes and the base is thick at 7mm so should be good!

[@BacktoBlading]

Yes, that just look silly imho without soul plates

[@chilli-iceolive-abode2447]

@@BacktoBlading I'm sure they don't look sillier than the FR UFR APs without soul plates and I've used them like that 😅

[@furykane]

Comparing to fr ufr, are the omnis lighter? The plastic looks pretty similar. Also the fr ufr are kind of rigid, do you think they are more flexible laterally? Also, my feet are 275. Do you think they can fit in the "42"/M shells considering the angle created by the shock absorbers? Otherwise i may pass, but overall, as wverybody, the skates look very good, they seem to be a great deal. I really want to try them and support the hard work you put on those!

[@BacktoBlading]

Yes, 27.5 will fit with Intuitions and maybe our stock liners after heat molding. They’re not as light as UFR but more flexible

[@furykane]

​@@BacktoBlading thanks for the feedback. I'll do my best to support your dedication by buying a pair! Now come the more difficult time: the choice! Edit: sometimes colour has an influence on the flex. Is there a difference between black and white?

[@StubbsOTD]

Hey Law, will there be any info on how we can request RollerWarehouse to swap white souls for black? The Omni customizer led me to believe it would be an option on Balance Distribution. (I totally understand why not though, that could end up being a lot of labor.) Also, you mentioned Standard being an earth tone company, was that perhaps a hint at skates the colors as the shirts? A forest green would look amazing!

[@BacktoBlading]

You should be able to request it, they might need a day or so to get them online. I know there were some Issues with their system. Worst case you can fully customize with our site, swapping souls is $5 since it takes some time

[@joshuamelton7311]

If you painted the bottom of the boot with a rubberized paint, would it help with sound deadening? instead of the eva foam in the soul?

[@BacktoBlading]

Possibly

[@StreetBladerBloke]

Loco skates have run out of my size shells sadly so will wait wen in stock..

[@yoshi616]

Will just the shock absorbers be available for purchase? I would really like try them in my Faction skates. I'm currently using some FP Insole heel saviors but they feel like they're too short. I think these would feel much better since they're ergonomic.

[@BacktoBlading]

If we have extras, sure

[@william9322]

is there a database of what liners fit well and what size for each shell?

[@BacktoBlading]

Not yet, but that’s a great idea

[@k.dtrying2229]

@BacktoBlading my( roces rl1 medium liner) fits well in the 295 large shell print out any thoughts on if I should go with the 295 shell or the 282 shell?

[@BacktoBlading]

I ride the large RL1 in my Large shells. I think the Medium would be perfect for you

[@k.dtrying2229]

@@BacktoBlading I figure it would be my printing layout is a bit off. The ruler to a wall and my foot on top measures out right. Thank you

[@longtermsquatter]

When creating the foot sizer pdf, how about selecting the plane with max width, this may be at 20mm from the base rather than 10mm

[@BacktoBlading]

That’s a lot of work for potentially more confusion. I think removing the width all together might be the move.

[@LifetimeShred]

Question on the whites, do you think they would take rit dye well?

[@BacktoBlading]

I wouldn’t mess with it, but they’re your wheels, ha

[@LifetimeShred]

@@BacktoBlading I mean the white shells

[@kumbackquatsta]

honestly, it looks sick without the soul plate

[@southcoaststreet]

Needs that Muzzle tape :)

[@jonlee5813]

ahmen

[@DiabolusBR]

I may have missed, but would be REALLY helpful to add some info about fitting (width and instep) It LOOKS like it will have standard width (D) (or even narrower than that) and low instep (akin to Shift). Is that an accurate representation ?

[@BacktoBlading]

Yeah, standard D width, feels like a 909/Blank. What sorta instep measurement would you like?

[@DiabolusBR]

@@BacktoBlading Appreciate the effort. The way ski boot fitters measure this from one side of the back of your heel, around and over the instep, and back to the other side. If that distance is about the same length in centimeters as your mondo size, in other words ~26.5 cm for a mondo 26.5 boot, you have an average height instep. A low instep would be less than 25.5 in this case, a high instep would be more than 27.5. But this relationship is usually informational based on the bootfitter's knowledge of what brands and models work well for high, low or standard insteps. I have a small length (255 mondo), high instep and wide feet, the best way is to provide you info on my current skates and how they fit since you've skated all of them: 908 small with an intuition v2 medium is the best fitting skates I've ever had (most of my other skates I've had to size up). My PS Next even after sizing up and using an Intuition v2 Medium still hurts my feet (both on instep and width). My Seba CJ Carbon size 40, gutted and with an Intuition Premium 25.5 works well on instep but starts to hurt the side of my feet after an hour or so (could be a tiny bit wider).

[@Hayyothhakodesh]

Ps u shud make a real premium skate. Have that offered with all high end components. Ur skate here is superb but some may call it a pro model but offer a all high stuff with a price about 400$ to 500$ or more. They wud sell like hot cakes . I swear!! Intuition liner or a myfit, a real nice boot that isnt too specific but high end finish and nice accents and fine touches like a brushed finish and beautiful hardwear, the best of frames that most folks already love and pro USA made wheels in both anti rocker and flat. But offer a 200$ liner with all this stuff and i think ur skate wud be the flag ship model the iphone 14pro max of skates the diamond and gold level skate etc. i think the standard omni is a 14 K gold skate. but offer a platinum with diamonds skate and ull explode with purchases. It wudnt be easy but anything worth Alot never is!

[@longtermsquatter]

So if the frame tnut is flush with the boot and requires a longer than usual frame bolt then this will cause difficulties with frames that may use low profile bolts. For example, are the oysi frame bolts going to be long enough?

[@BacktoBlading]

You’ll need longer bolts

[@longtermsquatter]

@@BacktoBlading yeah, but certain frames have custom bolts for low profile of head diameter. So just thinking that this could cause some issues

[@danielreigdiaz1373]

The T nut is flush in the inside, the head of the bolt is on the other side: under the top part of the frame. The geometry of the head will be adequate depending on frame and wheels, but any M6 screw will work with the T-nut.

[@Gearup424]

Yes ! Cuff Bolts ! 😍😍😍

[@Gsfbandit93]

What is the width at the widest point of the 44 shell?

[@Better_Car_Control]

How are you guys managing quality and repeatability for the first production run?

[@BacktoBlading]

We’re working with a factory that has made our frames for 4 years and makes a bunch of other skates. They’re great

[@chinobean3555]

hey sir what are those skates above your head to the right? i cant tell

[@jamesmorris6078]

What is the frame high from the soul plate to the top of the h block groove

[@BacktoBlading]

Not sure off hand. It’s a max 58mm wheel though if that helps

[@apaleguy]

This may sound silly but I can just take the liner and throw it in my oven I use for cooking to heat mold to my foot???

[@BacktoBlading]

Correct, most heat moldable liners are like that. Just keep it low as your oven will go and put it on a baking pan so you don't burn anything.

[@apaleguy]

@@BacktoBlading just ordered myself a pair and I cannot wait to combine them with the recent yellow compass frames I got from you a few months ago. You're an innovator, Law. I am beyond excited to get my pair of Omnis. Thank you for the reply and clarification 🙏

[@blobeyeordie]

The skate of the Gods

[@kumbackquatsta]

is standard an aggressive only company? or will you be making other skate styles?

[@BacktoBlading]

The Omni is our first skate. But I love all sorts of skating. Aggressive focused for sure

[@MK-xw1rp]

Ok so ware do I order my pair I want ur liner a white shell whit black cuffs is it possible to get that or na ??? I’m a 27.5 cm can I get size 9 shell bc the 10 would b to big got skinny ankles,can I purchase them today ??

[@BacktoBlading]

Preorders Saturday, shipping in November. www.standardskate.co

[@jasoncalva]

Any timeframe for when we get to find out who is on the official team?!

[@BacktoBlading]

November!

[@mygoodman8716]

Hi! If it doesnˇt bother you much could you please tell,how much does the boot weight without soulplate? If i will ride them without one,as a freeskate option, since i have few ufs big wheeled frames, but iˇam also tall and hebi, should this shell be stiff enough for me? Iˇam about 90kg. thank you!

[@BacktoBlading]

I’ll have to weigh them. Can you message me on IG or elsewhere?

[@semicoolin]

What size shell are you skating? I don't think you mentioned it. If you did I missed it.

[@BacktoBlading]

I’m on the Large, 44

[@semicoolin]

I thought so, just wanted to be sure. The large's look great. @@BacktoBlading

[@yapjoonsiong8943]

How do the stiffness of the Omni’s cuff compare to the Them 909s?

[@BacktoBlading]

909 are typically more flexible but it depends on the model

[@yapjoonsiong8943]

@@BacktoBlading thanks Law!

[@webetterdrinkthisbeforeitg2530]

Any chance you'd host a skate release event at the balance distribution warehouse? I'd love to be one of the first people to buy a pair in person. PS I'll bring more mead with me 😂

[@BacktoBlading]

Ha! Yes for sure but will likely be a last minute notice thing as shipping/delivery is hard to nail down

[@webetterdrinkthisbeforeitg2530]

I'll bottle the mead this weekend 😅

[@kurtkoh6868]

are the buckle riveted too?

[@BacktoBlading]

Yes, subject to change though

[@methosb]

Would have liked to hear about the depth. No one talks about it for some reason.

[@BacktoBlading]

Which depth? I can measure for you

[@methosb]

Like how do they compare in depth (space between the top of your feet and the top of the shell) and instep depth (from your heel to the front of your ankle) compared to other brands? For example I have a pair of Rollerblades that I have to put an extra insole insole in to fill out the extra space, while on a Roces M12 I get lace bite because of the lack of depth / shallow instep. In hockey skates depth and instep are often discussed when comparing fit of different brands.

[@alleystargrowley2784]

looks like thems and thrones had a baby

[@maxknuckles13]

Nice..!!

[@laser1675]

What is the weight of a bootonly omni in size 40? im dying to know! ty

[@BacktoBlading]

Size 44 are 5.5 lbs for the pair. I don’t have final 40s yet to weigh them

[@anthonyocallaghan7785]

How does the Omni flat setup vs an Aeon compare?

[@BacktoBlading]

Aeon is much much easier to grind flat, but Omni would slide better on souls. Also is UFS so you can ride a Oysi or FLT4

[@playbackphantasy]

🔥

[@perpetuus.flamma]

is it supportive enough for wizardry

[@davequist7710]

My guess is similar to a 909

[@BacktoBlading]

I skated Kizer 90s with no issue but I’m no wizard. Hope to get a set to someone who can test that

[@kumbackquatsta]

will you be offering them unpainted?

[@BacktoBlading]

No, but you can always paint over or tape over

[@learobinson]

OMG the WHITE

[@SCBCshorts]

Cmon Law... I cant get a 12/12.5 or a 12/13.😢

[@BacktoBlading]

Well, what’s your foot in cm? If it’s less than 30cm you’re fine in our XL

[@t3chno0]

🎉

[@juancsmix]

I still don't understand why new brands like them or mesmer do raised heel skates. it makes absolutely no sense. extra plastic, extra weight, no space for shock absorbers.

[@BacktoBlading]

Mesmer reused the Throne, so they were stuck. Then I think wanted to improve the 908, not change it dramatically.

[@the_little_car_project]

hey whats the weight of a complete skate?

[@crabapples1995]

?😂

[@danielreigdiaz1373]

He says in the video: around 1750g anti.

[@BacktoBlading]

It’s in the video, but I know it’s a lot. 1746g for the black size 44 with stock antirocker setup

[@the_little_car_project]

@@BacktoBlading apologies i must have skipped that part. thanks

[@jamesridley9178]

If anarcho-capitalism was a thing, you might be that.

[@BacktoBlading]

Ha!

[@korytvytaccount8173]

SIR, PLEASE DO NOT BE LIKE ALL THE OTHER SKATE COMPANIES AND EXCLUDE SIZE 13/14.

[@BacktoBlading]

That’s the goal, molds are really expensive though. Will need some time to recover before we can.