Motorola Moto G Stylus 5G LCD Touch Screen Replacement XT2131

[@PrecisionGutter]

Very helpful..thanks. I didn't have the frame but figured it out

[@DIYGeardo]

Glad it helped

[@consuelareynolds5484]

The kit I bought for this didn't come with adhesive to reconnect the back of the phone or battery. What kind of adhesive do I buy and where

[@erichandyauto]

What heating pad temperature do you recommend to soften the glue? Thanks for sharing?

[@DIYGeardo]

Any time start with 50-70 for 2 minutes. Then increase with 1 minute intervals. Different devices need different timings

[@loganmccloskey8494]

Should have disclosed at the beginning of the video that you were using a prepared frame for replacement instead of just the screen title is misleading and video is not helpful for anyone who doesnt have a frame & screen

[@meerfazal3324]

Good ❤❤❤

[@DIYGeardo]

Thanks

[@melanatedwealth2222]

Before gluing....MAKE SURE IT WORKS PROPERLY.

[@DIYGeardo]

Yes always. 👏

[@joesalazar770]

Ok so ive seen multiple videos on how to replace a broken screen watched all of you disassemblle the back of the phone but no one shows replacing the screen or the how to remove the frame. So i yake that as a it cant be done and none of the videos show the screen being removed kinda odd but manufacture covers there bases for sure. Good luck all

[@muniataslim5412]

Yes next next

[@DIYGeardo]

Thanks 🙏

[@mauricioantronelo3324]

forced for remove batery, best use alcohol isopropolic

[@DIYGeardo]

Yeah but be careful not to add too much. It will ruin the screen

[@ElExorcista-qm8ls]

👍

[@DIYGeardo]

Thanks 🙏

[@CaptainGoldberg]

GREAT. Until it wasn’t. Why didn’t you disclose at the start of the video you were only doing this for screen with frame? I got my whole flu&:ing phone apart. Now what?! Got it. Don’t watch this channel again.

[@DIYGeardo]

Sorry, I think most of the time you check the video before ordering the part or repair. Also, try to go with the frame. It is more durable in long run and also easy to perform the steps.

[@10YearOldTom]

Looks like a "You" problem

[@CaptainGoldberg]

@@10YearOldTom I'd definitely say it's a YOU problem.

[@cryptopeter1]

Good comment and I suggest the gentleman who says "Next!" over and over and over state at beginning of video this is only for screen and frame. Irritated me.

[@loganmccloskey8494]

Wish he at least showed how to do without the frame

[@UptownSport]

>>> WAY, WAY simple to just replace the screen. Remove back Remove Board Frame Remove battery R&R screen. S I M PL E I DID remove the logic board, but didn't need to. NO REASON to do all the other steps

[@Onur19O7]

🙂👍🇹🇷

[@DIYGeardo]

Thanks 🙏

[@mikeleon7835]

I'm not subscribing to this video at all everything was fixed and worked perfectly but when it showed to put the glue on the back cover it messed everything up I was proud of myself to have a good working phone but the glue messed up all the parts to my goddamm phone don't put glue on it find something better or else you will be as miserable as me

[@DIYGeardo]

How much glue you add? for any job with glue related, if you add too much then it will have issues. Thanks for your feedback 👃