Poco X3 NFC Charging Port Board Replacement | X3 Pro | X3

[@philippevassard7944]

u litterally saved me because finding a repair shop for a xiaomi phone in canada is very hard

[@DIYGeardo]

Thanks

[@XxXshaharXxX]

I can't thank you enough, my phone stopped charging and in the repair shop thay wanted 80usd for fixing it but I opened my phone and reseeded the cable and it's like new :)

[@DIYGeardo]

Glad to hear that 🙏

[@katsak89]

Man, you 're awesome! Best guide I could find, this was my first time trying to repair a smartphone, and you made it look too easy. Thank you!

[@ride70forlife37]

Hello, your video helped me a lot to repair my phone, thank you !

[@DIYGeardo]

Great 👍

[@saydwessal8168]

Excellenttttttt Tutorial!!!!!!!!! Ich👌🏻👌🏻👌🏻👌🏻 thanks a Million 👍🏻🙏🏼

[@DIYGeardo]

Glad you liked it!

[@raiderzx14]

that help me save a lot of money. thank you very much.

[@DIYGeardo]

You're welcome!

[@jeremyjonlobaton3786]

I have a question is charging board and flex of poco x3 nfc is compatible to the poco x3 pro?

[@TulaPradhan-w8v]

Yes

[@unkewleelots8705]

do u need to remove the flex cable from mainboard?

[@DIYGeardo]

NO need, you can disconnect it from the charging board. It is safe to remove that is why.

[@unkewleelots8705]

@@DIYGeardo okay thank you

[@amintido9482]

if i change the board,my data still intact right? and i dont need solder the board right? thanks for info

[@DIYGeardo]

Which board?

[@aleksandarkirik6978]

What kind of glue are you using?

[@DIYGeardo]

B7000/t7000 is fine

[@asadmehmood8614]

Bro pocox3pro and poco x3 mainboard flex strips cable are same?

[@DIYGeardo]

yes

[@jcesaralb]

I have a microphone problem, would changing the port solve the problem?

[@DIYGeardo]

Most likely yeah

[@afghanv1nce160]

Thanks it helped me a lot

[@DIYGeardo]

Glad it helped

[@hyemu9436]

What type of screwdriver do you use?

[@DIYGeardo]

Philips screwdriver

[@Gabrieldinu-z3x]

The charging board its from poco x3 nfc is same like poco x3 pro?

[@DIYGeardo]

If I am correct it is same

[@Kidili91]

Would the replacement of the cc board help my case, here's the issues with my phone whenever as of recently I use my phone while it's charging it's going nuts, it turns off and it turns back on the charging, charging doesn't exceed the discharge alot of the time and a pop up shows up that informs me about the slow charge (the charging goes as low as 130mA, probably even lower but that's what I saw) also most of the time after using the phone for a bit I have to let it rest for like 30-60 min before putting it on the charger but even that doesn't help sometimes, however sometimes the charging process is perfectly fine 5500+ mA no interruptions. I tried different chargers and cable (same specs and brand), I tried different sockets and even tried it at my neighbors house and it's the same. The battery appears to be in good condition and it discharges at a normal rate. I had a very similar situation with my tablet a year and a half ago, the only difference was that the battery was discharging extremely fast, I took it to a service and had the battery, cc board and charger replaced which only fixed the problem for a few days -.-

[@trinitite4617]

hey i had a similar issue before and went crazy trying to diagnose it but in my case (after wiggling the flex cable with my hand) found it was almost definetly the flex cable

[@TheThomrb]

i love you,this worked great

[@DIYGeardo]

Great to hear!

[@Dan_druft]

Bloody hell it works, amazing thanks.

[@DIYGeardo]

Happy to help

[@papapa51]

Thanks, everything went fine with your video !

[@DIYGeardo]

Glad it helped!

[@pilotair9636]

Hello . My poco x3 pro also had problem charging. Stuck 15% and drain but it says fast charging. It is os problem but i didnt update still in old o.s or something else?. Thanks

[@Crisostomo.1barra]

i have a problem with my pcoco x3 nfc all the hardware below is not working (charging port, audio jack, and speaker) what might be the problem with this?

[@la7dfa]

Might be just the flex cable that needs to be reconnected.

[@DIYGeardo]

Most probably the main flex issue

[@haz626]

i already do replacement but i got an issue that when i call someone and charge at the same time. the one i called heard buzzing. please help me

[@kappaleaf]

Hi sir, i have a question. I have poco x3 pro and the problem that i have is that the phone not detect on the pc but it can charging. I also cannot use the otg. I already try all solution like changing the cable, reinstall driver, try other pc, try other otg cable and so on. So do you know the problem? Because i thought if the charging port and ribbon is the problem then i think i can replace it myself. If it is other problem then i hope you can answer my question Thank you

[@leaksyt5524]

I have got the charging board replaced but now it's fingerprint sensor is not working. Is it related to replacement.

[@demonariii]

u are a lifesaver

[@DIYGeardo]

Thanks 😊

[@galahad3750]

hello, I'm having slow data connection after replacing mine, how can I fix it?

[@SougoUltimateSadist]

Hey, do you by chance know if these boards are compatible between models ? I have x3 pro with busted charging and option to buy broken x3 nfc for parts with good display (which might come to use later on in life). So my question is will nfc charging board work in pro model ?

[@619LAzaros]

Its the same board across the 3 Poco X3 models OEM HQ Xiaomi Poco X3 PocoX3 (MZB07Z0IN, MZB07Z1IN, MZB07Z2IN, MZB07Z3IN, MZB07Z4IN, MZB9965IN, M2007J20CI)

[@ShadeShowdown]

Where to buy the charging board from can u give me link?

[@619LAzaros]

OEM HQ Xiaomi Poco X3 (MZB07Z0IN, MZB07Z1IN, MZB07Z2IN, MZB07Z3IN, MZB07Z4IN, MZB9965IN, M2007J20CI)

[@syuq09]

Thank you for guiding me ..

[@DIYGeardo]

You’re welcome 😊

[@no-name3768]

Sir if the charging board is exploded can still repair?

[@DIYGeardo]

Well it is possible but needs to check the device first

[@no-name3768]

@@DIYGeardo i did change it but still not working 😓

[@neilmervynlisondra4876]

Hey bro my poco x3 nfc got thrown away by my little brother in our bed and it wont charge anymore I dont know what to do should I change the flex strips or charging port or mother board? because motherboard and charging port is loose should I replace them?

[@DIYGeardo]

First, try a different cable, power adapter > Next, you can open the device for any loose connection > Next, you can try to replace a new charging port board..Initially you can try with these steps..

[@asadmehmood8614]

Sir pocox3pro and poco x3 mainboard flex are same ?

[@DIYGeardo]

yes

[@RAYA-e6s]

best battery for poco x3 NFC?

[@Reddybabu-e3t]

Hello, my poco x3 pro phone charging slowly it takes 6 hours for full charging. And my battery health is good. Can u please tell the problem

[@eugekun]

Does Poco X3 NFC and X3 pro the same charging board?

[@DIYGeardo]

yes

[@eijamlahwoii8876]

i have problem. my front camera n 0.8x camera cant use. why?

[@DIYGeardo]

Try to reset the phone and update.. if not it is a hardware issue..

[@badrou_diji]

Can you put a Poco x3 battery on Poco x3 NFC?

[@DIYGeardo]

it is different

[@SaMy_89]

Hello sir , what tipe of glue it is (name) . Thanks

[@DIYGeardo]

B7000/T7000

[@mr.steller7814]

Where can i buy a the charging port?

[@DIYGeardo]

Thanks for the message. Sorry we have missed your message. Were you able to find it? if not let us know. Thanks

[@rititiiirata4613]

@@DIYGeardo i can't fiind it

[@witaliytereschenko3542]

Hello! Poco X3 Pro: the problem sometimes leaves the charge and starts to go again, before that there were four repairs, they changed the lower charging board, on the last one they said something related to the upper board, should it be?

[@DIYGeardo]

Well it can be some IC's too..yeah sometimes it can be the logic board.Need to go one by one. And also OS issue, try to reset the phone after a back up.

[@barkingcatswow]

@@DIYGeardo I changed my board twice, but it still not charging. What else do I need to change?

[@johnlaude888]

My poco x3 nfc fast charging not working anymore. It is still charging but very slow. What do you think is the problem? My charging port? My flex cable?

[@paulavesla9843]

Same as me bro

[@alpitu21]

Your charger. Replace the obvious first.

[@AmarSingh-un9jn]

Hello great video but what’s the part number for the charging port? Regards

[@DIYGeardo]

Not sure about the number. But you can get with the model name..

[@619LAzaros]

OEM HQ Xiaomi Poco X3 (MZB07Z0IN, MZB07Z1IN, MZB07Z2IN, MZB07Z3IN, MZB07Z4IN, MZB9965IN, M2007J20CI)

[@truong-vlogs-07]

Có thể bán cho tôi cái chân xạt được không

[@DIYGeardo]

Sorry, what do you mean? the part

[@KanchanOmar-q9q]

How much price

[@DIYGeardo]

Please the Check description Link

[@ayieshaschannel4871]

my poco x3 pro is charging slow, mi turbo is showing but it takes almost 3 hours to charge 20% to 100%, i check using accubattery app or ampere it show only below 2000ma incoming some times 150ma the battery usage is fine just slow charging issue..

[@DIYGeardo]

It maybe the charging port or board, easiest replacement is the board. But finding an original one will be hard. Also you can try a hard reset. And also sometimes software updates creating issues too. Needs to diagnose with software and then moves to hardware

[@nicoladaverio5185]

I changed the port, it started charging up to 14% then shut down and only a white led appearing up sometimes. What would be next step? Battery was going very well, has 9 months, should I try to change it anyway or the motherboard? thanks!!!

[@DIYGeardo]

You are still under warranty?

[@Hacktheplanet_]

be careful when removing the tray, i messed up the motherboard main flex connector when trying to remove it, had to buy a new one, also there is a screw which is covered by a sticker which is easy to miss!

[@esiagodleaf]

I'm having a hard time putting the charging port properly on its place. It's loose. 😢

[@DIYGeardo]

You mean the cable?

[@poovendhanr6932]

How much cost for buy that charging port?

[@DIYGeardo]

About $15

[@bandiraju1609]

Mi 11lite 5g ne

[@DIYGeardo]

Will try , thanks

[@snow4562]

the technician charged me $14.50 for changing the charging board and still some problem happening, so he said that maybe the flex need to be changed and another $14.50 for it 🥴

[@pen5666]

this technician?

[@jermilaguilar1508]

What a nice vid then I realize my phone is x3 nfc 😆

[@DIYGeardo]

Thanks for your feedback🙏

[@619LAzaros]

Its the same board across all 3 Poco X3 models