GEC #71 Bullnose review. Disturbing discovery during review.

[@BladeBanter]

Glad the patch arrived safely and thank you for the communication and assistance.

[@BlueCollarSurvival]

I was stoked when I received the patch. Yea I really enjoyed our chat the other day. I just love the communication between all of us in the reviewer community. I need more time to catch up on everybody else's videos. Thanks again David

[@BladeBanter]

Blue Collar Survival Thank you, and agree it's a great community.

[@iloveknives6080]

Dang not what I was expecting. I was looking forward to this knife.

[@BlueCollarSurvival]

I still really like this knife I just have to close her nicely. I still was not expecting that to happen. It kinda threw me off a little bit and got me kinda flustered. 4.5 out of 5 stars just because of that issue though. Thanks man👍

[@iloveknives6080]

I replied on Facebook about my grail knife.

[@BlueCollarSurvival]

That is a sick knife. Better be giving the wife some back rubs for letting you get it.

[@iloveknives6080]

I held off for now after I check the bank account. But I have a car I’m selling so as soon as it’s gone that knife is mine!

[@TheKnifeBeater]

Thanks for the video Justin. I've had my eye on this one for a little while. Very disappointing about that rolled edge, but like you said, shouldn't be to tough to fix. Especially since 1095 is known for it's ease of field sharpening.

[@BlueCollarSurvival]

I got the roll right out and put a new mirror edge on it. I'm actually in the works of a trade for a Spyderco Roadie. She's still a great knife and is ment to be a user for sure. Thanks Jay👍

[@BigRedEDC]

I just got that exact knife a couple of days ago and love it!! Thanks for that warning...I will watch for that from now on!!

[@jackfarmboy]

Sweet patch, glad you got yours. I would perhaps contact gec regarding that. When your rap album drops ill be sure to grab one. Nice review 👍 . Still digging this guy!

[@BlueCollarSurvival]

I was pumped when David asked me if i wanted a patch. I got the roll out of the blade after the review. Just used a honing rod so i didn't remove any metal. It did kinda bum me out when it happened but now i know to close it gently. I'll be rapping to the beat of my ZT flipping lol. Still love this knife just bummed about that issue. Thanks Jack👍

[@BladeBanter]

Blue Collar Survival Awesome Justin. I'll probably pick up a modern slip joint at some point. The GEC is a classic though might need to look into one.

[@BlueCollarSurvival]

I would definitely recommend a GEC or Case for a modern slipjoint. I love the feel and vintage look. Makes me think of simpler times.

[@ocomegashadowstacking5886]

Amazing video of more knifes! :D

[@BlueCollarSurvival]

Thank ya brotha. Glad you enjoyed

[@paddyspotatopeelers2154]

Is there no way to slip a piece of steel in there and knock it down.gorgeous knife.atb paddy☺👍🍀

[@BlueCollarSurvival]

Not sure if I could do it or not. It's a hump to accommodate the handle pin. Still an amazing knife and I guess this is a common issue with GEC knives. Most slipjoint collectors aren't even bothered by the issue because its such a great knife. Thanks Paddy☘👍

[@PJ_Grateful]

Great review! Ofcourse i also subbed these awesome channels! I really like the blade shape of the bullnose. I know gec has some quality knives. Cheers Bart 👍😀👊

[@BlueCollarSurvival]

Thanks Bart. Those two channels are amazing. Both Jack and David have been great people to chat with and watch. I know you love slipjoints and these are amazing quality knives that just want to be used. Thanks again Bart👍

[@Beowulf_98]

The bloody thing looks new how can you review it.

[@bdh3949]

On a brighter note after 2 or 3 sharpenings the blade rap should disappear.

[@BlueCollarSurvival]

I was thinking the same thing. Shouldn't be like that but what can ya do?

[@BubbaArmyEightTen]

I love my Opinel and keep one at work for lunches, great bargain proposition.

[@BlueCollarSurvival]

I take my Opinel with me everywhere. I use it at restaurants, friends houses and at home for meals. Everyone laughs at me about it, they just don't understand lol. Thanks David👍

[@rickkerans8485]

Shame you hit the pin. It obviously is in the wrong place. Other than that it seems like a nice knife. Wish I could find one for sale. Enjoyed the review.

[@jtucci5711]

I'm disappointed to hear about the problem with the protruding pin that nicked the blade, I just purchased this exact model moments ago and usually check out the reviews first but this purchase was kind of spontaneous, I'm disappointed and a bit shocked that a company with this good of a reputation would not want to replace the knife for you. Maybe I should have stayed with my Rough Ryders, can't say I have had that problem with their $15 top of the line 440c steel. There is a disappointment around every corner, thanks for the tip though if I have this same problem I will be dealing with it differently. Cheers

[@BlueCollarSurvival]

From what I've heard from people this problem is hit or miss. Let me know how yours turns out.

[@jtucci5711]

@@BlueCollarSurvival Thank You and will do, this is my biggest investment in a slip joint as I am a Flipper enthusiast but these GEC knives have really captured my attention, next time I will check to see if you have a video before hand as I normally do, I think I got the last red one of these and at a good price to boot.

[@ChaseAHawk]

I filed the underside of the spring bar with a needle file, and re cleaned up the bevel on mine. Its perfect now. But yes it's bad if you dont know how to fix it. Well its bad anyways.

[@BlueCollarSurvival]

It's unfortunate that had to be done. I really love the knife overall but I've been really turned off towards GEC knives now.

[@ChaseAHawk]

Blue Collar Survival I can understand that. But give the other GEC models a try... they are great. I bought 4 other different knives and all have been excellent.

[@BlueCollarSurvival]

I will probably end up getting another one. They have some many designs I just love.

[@ChaseAHawk]

Blue Collar Survival I have a TC Ancient Barlow arriving today. I’m stoked. you on Instagram? I'll look.

[@BlueCollarSurvival]

Ya I'm on Instagram. I bet you're stoked, I know I would be to!

[@jimbok2492]

I dont know why you reviewers act like you can get a GEC for retail. They sell out instantly. You'll pay 125 at the least if you want that knife

[@fecheverria]

Schrade Imp22 has same problem. I ordered 2, one IMP22Y (yellow handle) and the black. Both has this problem.

[@BlueCollarSurvival]

It's really a let down when you realize it's happening. I guy told me to either lay a piece of gutted paracord or thin piece of leather on the inside and it'll eliminate that. Still wish companies would be a little sharper on the quality control side. Thanks Felipe👊

[@Eldofarmboy]

I need to play with some of these GEC knives

[@BlueCollarSurvival]

You know there's so many styles of their knives that I really enjoy but after getting that roll from the blade racking on the spine I kind of got a little turned off by their knives. But I should probably give them another chance because I know they make very quality knives and people have had no issues with a lot of them as well.

[@Dmhlcmb]

Blade rap is unforgivable from GEC. If they were doing anything to reduce the outrageous secondary market I wouldn't feel that way but they aren't. Disgusting.

[@BlueCollarSurvival]

I was truly disappointed with it. I was so excited to get my first GEC and I ended up with this. Really left a bad taste and I haven't purchased another GEC since.

[@Magneticitist]

Knowing how to avoid abuse in a work knife can get so ironic. Of my knives the one I use the most is the cheapest one which was like a $7.99 Ganzo that looks something like a Delica clone. I use it the most because I know I'm going to abuse the edge and I don't want to damage the more expensive knives I actually bought for the purpose of supposedly being quality enough to handle the abuse. The other day I was dealing with an issue with one of my door locks and had to jimmy that sucker open with the Ganzo using the edge to catch the latch bolt and slide it over bit by bit. Didn't really hurt the edge, but later on I had my Rat 1 in D2 on me and I tried to do the same thing thinking it would work better if it came down to it again.. didn't have the same success and ended up cutting myself when it slipped lol. In that regard a knife like this even with a flaw still probably has more practical application in the 'work knife' world than a $200 benchmade.

[@BlueCollarSurvival]

I agree with you about being a great work knife. These GEC knives are meant to be used and abused. I also abuse the crap out of my Ganzo that resembles the Benchmade 940. I can always appreciate hearing someone talking about using their knives. They're tools, they're meant to be used. Thanks man👍

[@ShortcutReviews]

If I had this, I would have a Posh knife for Paddy’s tag.... I look at my knives, and I have no classy blades 😔. I’m going to have fix that.

[@BlueCollarSurvival]

Shortcut Reviews there are so many amazing looking slipjoints on the market. Quite a few really nice ones at crazy low prices. Rough Rider makes some classy knives for really cheap. I'm just getting back into slipjoints.

[@Dave_A41]

wow, glad i watched this, I do not want a knife that i have to pay close attention when im closing it

[@BlueCollarSurvival]

It was a real disappointment when I found that. I'm just glad I caught it in the review so I could inform you all. I've actually traded this knife off for a Spyderco Roadie and I have zero regrets.

[@oldfool2635]

If you need a leather lanyard I could do one for zero cost, part of the nice community service, have a good one, Furbs

[@BlueCollarSurvival]

Now I wish I wouldn't have traded it off lol. This community is amazing! When I started my channel it was a blessing in disguise. I've met so many amazing people since I've started and I feel blessed. Thanks brother

[@frankkollar2278]

This run of 71's all seem to rap the blade. my first one I had to resharpen so many times it was no longer a bullnose by the time it stopped rapping the blade the second one I put a piece of 275 pracord in the bladewell it sits there nice and snug no glue and keeps the blade from hitting the backspring

[@BlueCollarSurvival]

That is genius my friend. I'm gonna have to pass that tip along. I love the knife I just don't like to have to think about how I'm closing it. Thanks again for the tip Frank 👍

[@marycahill546]

good solution -- but really, this should not be necessary. Poor quality.

[@marycahill546]

for the price they should be perfect.

[@BlueCollarSurvival]

I'm with you there. I guess this is an issue many people have had and to me that's not right. I've talked to some people that have me tips on how to stop the issue but it shouldn't be like that. Case makes knives in the same price range and I haven't had one yet that I've had issues with. Thanks Mary!

[@janetowens7288]

You can still get a case for 25 to 30 dollars. This knife is now over 100 dollars.

[@jonallan392]

Check out kiwi outdoor leather shoelaces for a lanyard. GEC botched this one a bit. I returned the 1st one, just to repeat with the second! Polished it out with a ceramic stone a couple of times, almost gone now.

[@BlueCollarSurvival]

I was so bummed when I caught that problem. I wanted to love it but that really bugged me. I ended up trading mine for a Spyderco Roadie. Thanks Jon

[@davids9549]

Not much point doing a size comparison with an Opinel if you don't tell us which size Opinel it is! You shouldn't have blade rap - it's a basic manufacturing defect and you should return the knife to GEC for them to sort under their warranty, which they will do, no problem. If you try to rectify it yourself you might invalidate that warranty.

[@jeremycrowe234]

Good review. Thanks.

[@bdh3949]

Thanks for the warning. Wish I had seen your video before ordering one last week as that particular issue really bugs me...like they are making their knives for collectors but not users. As you say though it's an easy fix and presumably will disappear after enough dremel tool grindings...lol, just kidding!

[@BlueCollarSurvival]

A buddy of mine put a small strip of leather in there, said he no longer has that issue. I guess this is a common issue with them though. Hope it works out for you. Maybe not all of them do it, just close it nicely. Stay sharp man👊

[@redsorgum]

I like your knife pouch, do you mind if I ask were you got it?

[@BlueCollarSurvival]

It's actually an original leather Leatherman Wave sheath. It has served me great since I started using it. I actually carry my Leatherman in my EDC bag now. Thanks brother👍

[@redsorgum]

Leatherman pouch, that makes sense, thanks.

[@BlueCollarSurvival]

Anytime brother glad I could help.

[@oldfool2635]

Did you ever get your leather lanyard?

[@BlueCollarSurvival]

I didn't. I actually ended up trading my GEC for aS Spyderco Roadie. I may get another Bull nose but I was kind of turned off by the blade roll issue.

[@oldfool2635]

If you need a leather lanyard let me know I'll make you one for free. No traps no tricks , check out the rings I made for Paddy free.@@BlueCollarSurvival

[@BlueCollarSurvival]

@@oldfool2635 brother I'll never argue a gift from the heart. I cherish all the gifts I've received during this venture. They keep me feeling humble and blessed. Thanks brother👊❤

[@oldfool2635]

you're welcome.@@BlueCollarSurvival

[@whatistrue0293]

Your Zero Tolerance is very sweet...

[@BlueCollarSurvival]

That's my baby. I wanna do a revisit review on it. I really want a different clip for it.

[@whatistrue0293]

Very sad for a 60.00 knife....

[@BlueCollarSurvival]

I guess it's common in most GEC models. Does suck for the price but most collectors aren't even bothered by it.

[@gmotionedc5412]

You got a bad one I think

[@BlueCollarSurvival]

I've talk to several people that have had the same issue but they figured out little things to prevent that. I ended up trading mine for a Spyderco roadie.

[@Baruch-Hashem]

A few sharpening and the rap will be gone, never to be seen again. Its a under sharpening of the blades for the 71.

[@willarmstrong6168]

👍