Geissele Super Duty HBAR Meltdown

[@GeisseleAutomatics]

We are incredibly appreciative to be a part of the Meltdown series! Even our guesses for the Super Duty Upper were too low! Once we get it back to factory, we will be excited to see where this failed.

[@colp9492]

Was waiting for this after seeing your autopsy video, impressive build 👍💪

[@notme3184]

Just so there no confusion @GeisseleAutomatics, we all want this.

[@GoldenWebb]

Glad to be a part of it my friends! It was a blast!!

[@chaoticcaninejb]

I'm guessing the bolt, only thing that makes sense I think

[@armorers_wrench]

We all wanna see it just like we all wanna see 12.5" Super duty uppers with 11.5" rails(everyone agrees, i talked to everyone privately before this). You guys are the only company that has ever played ball with Goldenwebb and its commendable because obviously the AR15 really wasn't meant to be an lmg. Well, looks like it can be done.

[@DJ-jq8if]

Geissele’s response to the original video is admirable. They doubled down and gave us this beauty.

[@GoldenWebb]

They sure did brother

[@texasranger24]

1633 - Geiselle HBAR custom upper 1055 - Radian mod 1 1010 - Sig Spear LT 1001 - LMT DI 901 - Geiselle Super Duty 832 - LMT piston 743 - Aero M4E1 722 - PWS mk111 686 - DD M4 V7 661 - Aero M16A4 643 - Trybe w/ DD gas tube 601 - DD M4 RIS3 587 - Caracal 816a2 574 - KAC SR-15 mod2 540 - POF 415 360 - Jacob Grey ULW

[@GoldenWebb]

Thank you brother!

[@texture6]

How about Stag Arms

[@dariuswilliams7509]

Shameful KAC shameful😂😂😂

[@sm00thpursuit33]

FN collector next please

[@based_radio]

BCM, Colt, and FN? Great videos!

[@simonriley8908]

Alright, Geissele. Lets get the assembly line's going.

[@GoldenWebb]

I told them the same thing!

[@jbcustom3745]

YEP, what's the point of the meltdown if its not an available configuration?if they can make it that fast for this video they can make it for the people lets go Bill!

[@GoldenWebb]

You got that brother!

[@patrickbowman8841]

@@jbcustom3745you don’t have a fully automatic lower to put that HBAR to use anyways. You will literally never run a rifle as hard as he does in these videos and I doubt you even have the ammo on hand to replicate this test. So what’s the point?

[@yeetermcskeeter4451]

@@patrickbowman8841 who pissed in your cheerios this morning?

[@Mikolt1911]

I’ve been in the gun manufacturing business for 35 years. That is a bad ass round count!

[@GoldenWebb]

It sure is brother!

[@Jiplr]

holy shit! 1633?????

[@GoldenWebb]

Yessir! I’m still In disbelief

[@chriswalsh9989]

Absolutely badass, and yes Geissele you definitely need to make this as a production rifle to the public!!

[@SmallArmsSolutions]

Looks like Geisselle recreated the Colt LMG bbl. Extreme heavy bbl with a thicker straight gas tube.

[@GoldenWebb]

Yessir!

[@sickdickop6118]

Heavy Brazilian butt lift

[@j8nkies20]

Hell yea... hope you guys are having a fantastic day. Shout out to Giessele for standing behind their product. BCM, where yall at??? Thanks for the video, mate.

[@GoldenWebb]

Thank you brother! Geissele is the real Gs! Hopefully BCM answers before to long

[@run_N_DoubleB_gun_N]

You successfully killed that hillside! This is the same feeling my credit card has when I go to the gun store.

[@GoldenWebb]

🤣🤣🤣

[@armorers_wrench]

*Radian Mod1 Sets the new record for a DI upper* *Bill Geissele* "Hold my cheese steak"

[@TheSundayShooter]

He can't keep getting away with it!

[@GoldenWebb]

🤣🤣🤣🤣

[@donwyoming1936]

All they did was copy the 50 year old Colt light machinegun.

[@GoldenWebb]

Must not have, the Colt IAR did worse then the SOCOM when the military tested it

[@nevadastrong702]

😂😂😂😂

[@JohnZ556]

OMFG! YES! A cool upper is actually being created from this series of tests. Stick it to all the naysayers, LOL!🤣

[@GoldenWebb]

Hahahah yessir!

[@bradenchurch552]

Super classy company. These vids have impressed me. Never really heard much about them until recently and now I’m considering getting one. Good job.

[@GoldenWebb]

Thank you brother!

[@robertreynolds6057]

Legend has it that to this day water still hasn't shown up. Also that's some high tech science stuff in that set up. Keep it coming brotha!

[@GoldenWebb]

Hahahhaa water still hasnt shown up! 🤣🤣

[@barrymccockiner6641]

Well done, and will done to Geissle for their YT response. I hope they sent you the ammo to help them!

[@GoldenWebb]

They sure did a great job! And yessir they did!

[@darprdun8968]

I just watched their autopsy on the first upper yesterday, was waiting for this one to come out. You did not disappoint🔥

[@GoldenWebb]

Thank you brother!

[@lucasblanchard47]

DANG that looked like a wild ride! I kinda like how the finish discolored from the heat, it looks neat.

[@GoldenWebb]

It was a wild ride my man! The handguard being 3 different colors got me as well!

[@martyhigby9911]

I hope more manufacturers support this channel and sponsor more videos, it's tests and videos like this that hold company's to a higher standard!!! Thank you!!!

[@GoldenWebb]

Thank you brother! I appreciate your kind words!

[@vgt]

Geissele needs to sell this barrel in a 14.5" length

[@gatormcklusky5850]

1st they need to sell it.

[@FullSpectrumWarrior]

Yes plz

[@GoldenWebb]

I agree 100%

[@scottharvey3054]

I want the 14.5 version

[@1rstTry]

Like you could afford the ammo 😂

[@Jiplr]

Lets go! I was waiting for this to release !

[@GoldenWebb]

Same here my man!

[@paowerhouse92]

Wow. That was fast! Geissele sent you their prototype heavy barrel not even more than a week later.

[@GoldenWebb]

It sure was brother! This thing is amazing!

[@paowerhouse92]

@@GoldenWebbAfter watching the video for the tenth time, I guess I can ask some questions about the firearm: How much heavier is the Geissele HBAR SD Upper vs the Geissele Standard SD Upper, and do you think the weight increase is worth the augmented reinforcement? How much do you think this upper will cost vs the original SD upper. I forgot all my other questions. But now I’m excited for when you obtain a Noveske rifle. I always wanted to see how that would fare in a meltdown since Noveske’s cold hammer forged, SOCOM profile barrels are touted to be M249 graded, which is a huge statement. Very curious to see how Noveske barrels stack up against the Geissele HBAR.

[@wildcat8598]

The super duty has always been one of my favorites. My favorite current setup is my 10.3” and my 14.5” super duty’s. Would definitely like to get one of these 14.5”/16” HBAR.

[@bryanduchane2371]

Couldn't click this meltdown fast enough!!!

[@GoldenWebb]

Thank you my friend!

[@TerminalM193]

Hell yea! LOVE this channel! On another note, I recently purchased a 16.1" LWRC IC DI with hbar barrel. It's often compared to the super duty when it comes to being near bomb proof. I would LOVE to see an LWRC burn down. Not any of the piston uppers but their regular ic di.

[@GoldenWebb]

We will try and get one brother!

[@Gearhead6.7]

I am very impressed!! I would definitely purchase the Hbar upper in a 14.5 or 11.5. Great video 👏 👌

[@GoldenWebb]

Me as well brother! I can’t wait!

[@mississippibilly_]

does Geissele let you order a 16inch heavy duty with a 10.3 handguard

[@darlsbarkley3493]

​@@mississippibilly_why would you want that? I don't know if that would even cover the gas tube, since they use a proprietary gas tube length on the 16 inch barrels.

[@GoldenWebb]

I’m not sure if they would or not. I’d say it would be like mine was

[@mississippibilly_]

@darlsbarkley3493 lol bc I'm different I want to achieve a certain aesthetic for my next build the short handguard would accentuate the barrel length and a suppressor with girth to complete the look

[@derekmclv]

Geissele also makes an incredible BCG! A Radian lower (with a Geissele trigger) and a Geissele upper is the perfect combination of quality.

[@GoldenWebb]

Yessir

[@cb72804]

This dude sounds like every Georgia State Trooper 😭makes me feel at home 😂 love it and love your stuff

[@GoldenWebb]

🤣🤣🤣 thank you brother!

[@victorortega2718]

I was about to pull the trigger in another blackout defense rifle but ... ima have to look at this geissele! Man! That thing was outstanding! Great vid guys stay safe

[@GoldenWebb]

Thank you brother!

[@nunyabiznes32]

Geissele games the system and gets the highest round count. Impressive results. Will Geissele make a super duper duty lower to match this super duper duty HBAR upper?

[@GoldenWebb]

I’m sure they will! I sure hope so!

[@mtnbound2764]

a super super duty!

[@somethinganything4864]

why? They already make a super duty lower.

[@ms3_alejandro]

@@somethinganything4864weaker by about 700 rounds

[@KR-fy3ls]

I just randomly fell into this saga the other day with Geissele's video. Very cool you have it already.

[@GoldenWebb]

Thank you brother

[@traviscoombes3578]

I love my Geissele Super Duty. Seems like a lot of people under rate them, but I believe they are a good as the competition or better. But that's my opinion.

[@GoldenWebb]

They are killer!

[@AaaaandYerDhem]

That's insane!! Well done Geissele and thanks for sharing Webb

[@GoldenWebb]

Thank you brother!

[@Mr_Zimm]

This is nuts. Instant sales boost.

[@GoldenWebb]

Haha thank you brother!

[@dimemmo]

Insane performance, love Geissele. I don’t think I’ll need one of these for myself but it’s super cool to see.

[@GoldenWebb]

They done great with it!

[@hitmanhart6220]

I’ve got three super duties a 16 14.5 and 11.5 and I 1000% hope they make the barrel and gas block / tube as an upgrade package. Granted G has been very fair in their pricing however I believe they could and probably should make this pricey. P.s. my spear LT is crying softly in the corner. Thanks again for a great video!!!!! God Bless You!

[@GoldenWebb]

Haha they make great things! We love Geissele and Sig in this house hold! Thank you brother! God bless you as well!

[@philliphestbeck8711]

Thanks for the vid and the response. And respect to Geissele for doing the follow-up autopsy

[@Triggertarzan]

That new super duty 2 won me over immediately. I’ll always be a smith and noveske guy but that super duty 2 at its price just runs. Was happy to see geissele take that rifle and talk about it and then make that hbar to just stomp the competition.

[@GoldenWebb]

Geissele makes some amazing stuff! Super impressed with it all brother!

[@Triggertarzan]

Will yall be trying the new smith ar3 with criterion barrel? I’m super interested into seeing a burn down on that mid length setup with the 1-8 twist. Thanks for the response man. Come down to Charleston SC anytime for some hunting I got about 6k acres to shoot and hunt on.

[@willieluv]

@@Triggertarzan I go to the website I can’t even see the super duty 2

[@Triggertarzan]

Our store here in Charleston we got 3 in. 2 fde 1 green. Sold the green immediately which pissed me off but I think we have one fde left or possibly black. C&S shooting sports in Charleston SC. If you’re still lookin for one. Tell them Waylon sent ya.

[@jbcustom3745]

i do respect that they came out to do this testing and upped the bar, there is prob very few companies that will do this

[@GoldenWebb]

Exactly

[@daniellorona2932]

Omg! Geissele -Super Duty HBAR PLEASE!!!! I must have one!

[@GoldenWebb]

I must have one as well!

[@redrighthandllc]

Did pretty what I would expect. I would hedge a bet the gas tube stretched in the gas key region. Also Im curious to see the copper build up thru the gasport. For sure the bullet jackets where melting before leaving the barrel haha. Great Video Ben!

[@GoldenWebb]

Hahaha thank you brother! Geissele should do another autopsy of this one when they get it in! People are dying to see us melt one of yours! Keep us updated with it!

[@TallTimbersUSA]

What an incredible performance!

[@GoldenWebb]

Yessir!

[@ericshost]

The fact that Geissele made this upper specifically, for this video is very cool! I like this upper with 16 inch barrel, but if they would make it with 20 inch barrel I would definitely buy it!

[@GoldenWebb]

That would be nice as well!

[@wahttehfuk]

Say what you will about Geissele, but 1633 rounds at once without failure is an absolutely stupendous amount of ammo to run through. I imagine the gas tube failed (like its designed to), but I'll be really excited to see the followup here, and hear from Geissele themselves about it.

[@GoldenWebb]

I can’t wait to hear either. You talking about an IAR build, you would have it

[@jacobmeyers3421]

Bro you've quickly become the best gun channel on KZbin.

[@GoldenWebb]

I appreciate it my friend. We try our best!

[@Axe-m-All]

HELL YES I HAVE BEEN WAITING FOR THIS

[@GoldenWebb]

Hahaha thank you brother!

[@smittdog1965]

Should be getting my Super Duty 16” DDC in 1-2 days now….you helped me make my decision on which AR 15 to get…thanks

[@GoldenWebb]

Thank you brother!

[@JohnZ556]

I know PIG makes two models of good tactical gloves with Nomex liners, which are very flame-resistant. Alpha FR and Delta FR.

[@GoldenWebb]

I’ll check them out!

[@thebryguy96]

I guess that cleaning the carbon from the gas tube using a pipe cleaner soaked in a product like boretech carbon cleaner and cleaning the carbon from bolt, chamber and barrel might be aĺl that's needed The rifles ejectiom seemed to be at 1 o'clock which typically means too much gas so probably the gas tube is ok. For sure, it's a tough rifle. I have 2 super duties and all my rifles use geissele triggers and buffer springs. Excellent products. A great video.

[@GoldenWebb]

Thank you brother!

[@humanbass]

Geissele will win some contracts based on this video alone

[@GoldenWebb]

I know it will

[@BrassCatcher]

In my opinion, the gas port probably started to erode. The gun over gassed itself so much it started outrunning the magazine and getting bolt bounce. Sick video!

[@GoldenWebb]

Thank you brother!

[@jrossnjax7]

Are you ENTERTAINED!!! YES!!! 😂

[@GoldenWebb]

🤣🤣 thank you brother!

[@CyclicMac]

Good to see this good’ol boah is getting recognition from Geissele

[@GoldenWebb]

Thank you brother!

[@Eddycarm]

wow amazing testament to geissele

[@GoldenWebb]

It sure is!

[@TTime685]

Wow.. I knew I really liked Geissele for a reason. That's quite impressive! And this gun had the most consistent rate of fire out of all so far, until the end of course. Never change Geissele!

[@TerminalM193]

Yea, I was shocked at both the super consistent cyclic rate as well as the consistency of brass ejection.

[@TTime685]

@@TerminalM193 Yeah exactly. That thing was obviously superbly built to exact specs

[@GoldenWebb]

It done amazing! Couldn’t ask for better

[@Apalm12]

This rifle will take the military contract back from sig

[@PineyJustice]

They could be good as some sort of LMG, but humping around an HBAR isn't fun. The standard lighter weight barrel profile is what a wider military contract needs with some full auto enhanced and accuracy enhanced versions mixed in. Trying to do everything is a great idea on paper until you end up with one of those silly swiss XXL pocket knives that are totally useless as an actual knife.

[@anthonyhampton9794]

Ya I agree and almost guarantee the DOD people are placing orders to test these in field asap 😂

[@GoldenWebb]

I believe it would do amazing as an IAR role!

[@arello3112]

I hope so but with how sig undercuts massively I doubt it

[@KennyRodgers930]

@@PineyJustice This has to be lighter than a SPEAR lmao

[@presidentdave1393]

Great vid and great results! Would love to see you try LWRC International both piston and DI.

[@GoldenWebb]

We will try and get one brother!

[@nocturnalx5]

Another vote for lwrc ic-di! 41V50 "machine gun steel" with spiral fluted barrel. My favorite rifle...would love to see how it holds up!

[@jerryyang8174]

I don’t have a Geissele but I want one now

[@GoldenWebb]

Get one!

[@rossearles4333]

Also, not sure if this is BCG related or if there are issues with the spring and buffer combo...if it's not picking up rounds then its extractor or a buffer spring issue, or lack of LUUUUUBE. Great vid guys! Keep it up!

[@GoldenWebb]

Thank you brother! We try our best!

[@bensmith9164]

My dude in the background needs to learn where his plate carrier needs to go

[@GoldenWebb]

Yea he does

[@micahthacker7425]

That is crazy!! I wanted the super duty, but now I want this setup.

[@GoldenWebb]

I do as well!

[@surfingtothestars]

someone with their $3,000 KAC is punching air right now lol

[@GoldenWebb]

🤣🤣🤣🤣

[@ryanboyd362]

Might have to swap to a grip with the back strap that goes up and around to protect the web of your hand on top of better gloves. Bout the only thing i can think that might compete and make that a problem again is the RRH Recce.

[@frogjelly2]

When is BCM taking the test??

[@GoldenWebb]

Who knows! We are trying to get one!

[@Eric_the_miserable_midget]

I’d prefer you buy the uppers anonymously, I feel you could be getting special treatment when the company sends you the upper. There could be extra QC going into the ones they send you.

[@KeterMalkuth]

For future meltdowns, might be a good idea to get a pistol grip with a very thick palm and a pronounced beaver tail to reduce contact with the receiver. Something like the hyperfire grip, stark grip, ATI grip, etc.

[@GoldenWebb]

That’s what we need for sure

[@jdirt1982]

1633 rounds holy shiznit

[@GoldenWebb]

Same!

[@Weavin01]

Oh the sun shines bright on my old Kentucky home. And so do Webbs gas tubes. lol Another one down, well done brother.

[@GoldenWebb]

Hahaha! Thank you brother!

[@chrisfly777300ER]

Geissele gib us thicc boi

[@GoldenWebb]

Yessir!

[@loyaljones8814]

Yes, I would definitely buy one if they start producing them .

[@GoldenWebb]

They will be!

[@aaronknight9071]

Absolutely I would want one of those uppers.! That’s pretty amazing performance.

[@bender43718]

Get a pair of tig welding gloves.

[@GoldenWebb]

That could work

[@spydercomonkey]

I hope to see a LWRC DI tested, they use a fluted heavy barrel profile which should be interesting.

[@GoldenWebb]

We will be getting one

[@spydercomonkey]

@@GoldenWebb Hurray, thats great to hear, thank you

[@GrantsDad]

G$ is the best

[@GoldenWebb]

They sure are!

[@dragonusmc0311]

Outstanding you got her done

[@GoldenWebb]

Yessir!!

[@bryanduchane2371]

I think your extra safety measures may actually be the wrong direction to go. By creating a "containment" area, you aren't allowing the potential explosion to escape away from your body. The AR is designed to explode away from the shooter and those near them. You may be increasing the safety hazards....

[@Jaycv-dq3rg]

That why you don't get thin or government profile barrel the extra 5 oz for heavy barrel well worth it

[@GoldenWebb]

Yessir!

[@justanotherinternetexpert7743]

So I kinda am not that impressed, i am sure if you gave everyother company a chance to send in a massively over built upper, with a special gas system and heavy barrel, i am sure their round counts would go up as well. Honestly putting this upper in the same list as just factory made uppers is alittle unfair imo.

[@navyman8903]

They've all had equal opportunity to do so and haven't.

[@justanotherinternetexpert7743]

@navyman8903 probably because a lot of them did not see the point of it. it's stacking the deck. If FN sends in a highly modified 249SAW that can fire from an M16 lower, are they going to the top of the list when they beat geisseles number? Shoot better yet if fightlite sends in one of their belt fed uppers. Do they get the top spot when they blow geisseles number out of the water? Giessles upper is not the same as a factory off the self Ar 15 upper. It was purpose built to do one thing perform well on this particular test. And any gun manufacturer can send in an upper to do that. ...so save the giessle simping for someone else navyman

[@navyman8903]

@justanotherinternetexpert7743 sounds like you're making excuses and moving goal posts, man.

[@justanotherinternetexpert7743]

@navyman8903 omg hilarious hahahaha, that is EXACTLY what Giessele did with making this upper. They moved the goal posts, I think you may be projecting a little bit there, my bros 🤣🤣🤣 ....I am literally arguing it should be kept equal, to off the rack uppers, not specialty built uppers that are basicly American versions of the RPK....BTW: I really like your substantive arguments, way to really debate with articulated arguments instead of vague generalized platitudes. It really lets me know the level of intellect of the person I am dealing with here. If you are not gonna argue your points better and actually put the effort in, I will probably just ignore you from now on. The same way I would ignore a crazy person yelling nonsense on the street.

[@xciteful]

I have to give it to Geissele for being so participated in this engagement. Fucking awesome.

[@GoldenWebb]

It is great!

[@FKAROUNDANDFINDOUT.]

Sucks that G’s QC is 💩………

[@GoldenWebb]

I’ve never heard of Geissele having problems with their QC

[@WindowsPlaysFPS]

That was cool. Wonder if the lower is having issues? I can't believe how smooth that thing cycles at the end of that.

[@GoldenWebb]

It’s still running perfect

[@Diceman12100]

Yes, im ready for pre-order, thats very impressive. Great video.

[@GoldenWebb]

Thank you brother!

[@mannybolletta]

love the POV and new set up

[@GoldenWebb]

Thank you brother!

[@JackD682]

The Geissele Super Duty really is a stellar platform. Great video! Would love to see a V Seven or Noveske meltdown in the future!

[@Rebellion1776]

That was impressive! Geissele has come up with a fantastic product! I hope they make it commercially available!

[@GoldenWebb]

They sure have brother!

[@douglasmilburn3875]

Having a hard time comprehending how you do content like this, and aren’t familiar with cook offs. Regardless, very cool of the company to respond to content like this the way they did! If I get any more modern style uppers, I know where I’m going.

[@GoldenWebb]

It’s pretty nice! We also have had plenty of cook offs. We try our best to mitigate that

[@entryleveltactics]

Now that's a glowing endorsement!

[@GoldenWebb]

Yessir it sure is!

[@sebastiantran1266]

This is the one gun that’s gonna pass through generations

[@GoldenWebb]

Yessir

[@seang1032]

Another great video. I know Geissele isn't king of gucci but I still love mine. As for the safety, see if someone will sponsor/gift you a sheet of bulletproof glass that can be camped in the plywood so it is clear but can still provide more coverage

[@GoldenWebb]

That would be good

[@nicholastrusley5476]

I just watched the geissele breakdown of the original super duty you melted. My super duty is still the most accurate out of the box I’ve owned. The testimony for them is just nuts. Your original 900+ count is on a proprietary 4140 cmv chf barrel. There H Bar is likely the same blend of cmv but heavy profile. The fact that the durability and accuracy is superb or on par to any other manufacturer in the game. They aren’t just the run of the mill nicely assembled but built out of house. They do a lot in house and have far surpassed the standard they set with just triggers

[@GoldenWebb]

Geissele is getting it done!

[@Duergantia]

I use this helmet setup in Tarkov because it looks badass

[@GoldenWebb]

It sure does!

[@xxCOKERxxPWNxx]

A 18-20” as an RPK with this upper would be super sick. Of course 11.5,14.5, and 16 would sell hard core too

[@GoldenWebb]

Yessir!

[@MontanaWild78]

This was awesome!

[@GoldenWebb]

Thank you brother!

[@MontanaWild78]

@@GoldenWebb Yes sir . Keep up the good work 👍

[@GhettoTactical]

This heavy barrel has to go into production. Would definitely love to see different barrel lengths available in a heavy profile.

[@GoldenWebb]

Same brother!

[@quincyjohnson2233]

You just made them a huge selling point biggest come up for them since the arex pistol in the gauntlet challenge now we all going to be waiting for the drop date 😂

[@GoldenWebb]

Hahahaha that’s true brother

[@beck4218]

Holy sht. Wow. Fantastic. I'm grabbing a 14.5 USASOC today.

[@GoldenWebb]

Nice!

[@hoosierdaddy2308]

I guess 1500 rounds and I wasn't sure it would go that many. I would be really interested in this upper if they sell it. I want one for varmint hunting and self defense. ❤. Great video. Thanks so much. ❤

[@GoldenWebb]

Same! Thank you brother!

[@tclarke19]

Geissele PUHLEEEEEASE make this rifle/upper!!! A surefire warcomp would be preferred, but that can be changed out after purchase. Also an 11” HBAR upper would be cool too! 👍🏼

[@GoldenWebb]

That would be killer!

[@Mark-qw1mt]

Cool video. One thing, a dry glove is a better insulator against heat then a wet one. Water is a good conductor of heat so a wet glove would likely made things worse. Stay safe.

[@milesm978]

This is insane! I’d love to see a heavy barrel URGI upper for sale. I’ve been holding out because they don’t come with Daniel barrels anymore but if they’re putting this much effort into their barrels I need it

[@GoldenWebb]

Geissele makes great barrels my man.

[@zackz4015]

1633 and um we aren’t sure that it actually failed. Insanity! Yes Geissele release this! Awesome video man!

[@GoldenWebb]

Thank you brother!

[@joshlanter0928]

We need to see what the Fightlite dual feed beltfed upper will do