Stereo is a spatial recording technique that captures directional cues of a sound. However, it has become common to call anything that is two tracks “stereo”. When using two mics on different people it is considered 2 channels of discrete mono. For some, thinking of it as 2 independent mono tracks can be helpful for some when editing and managing synch.
@RonaldBrown599 ай бұрын
I work alone, so I almost always record in mono. But I do see the benefits of recording in stereo. Great tutorial, and thanks for sharing.
@Hyunucooks7 күн бұрын
it scratched my itchy back. just bought dji mic2 and this video helps a lot thank you so much
@michaelmarcano92009 ай бұрын
Thank you! Everyone talks about video but rarely do I see creatives get into audio....the more the better! Do you ever EQ your audio? I'm sure we'd like to see that if you do!
@katherinejzhang11 күн бұрын
Hey this was super helpful! just subscribed! i'm a beginner and have a bit of a silly question, if you're recording mono voicover with a wireless dual channel kit, can you just use one receiver? what would be the benefit of using both receivers like you are in your audio test? Thanks!!
@VegasSlotsVP3 ай бұрын
I don't see the link to the mistake of uploading stereo to KZbin... Could you help me? Also, I am a slot channel. I am hoping the DJI MIC 2 will help me improve the reduction of copyrighted songs that get recorded while I am recording. I am the only one using a mic - do I still record in stereo for a better chance at getting rid of the music or at least get it way down so it is not so prevalent? Thanks!
@growformegardening5 ай бұрын
Thanks! We have learned SO much about our DJI Mic 2 and Pocket 3 from you. We have been using two Mic 2's in stereo for recording our videos and since I edit in iMovie I haven't been able to put them back in to mono. Do you think it is better to record in mono with the two mics or pull the trigger and upgrade my editing software?
@Gemini_Connect5 ай бұрын
You may want to consider upgrading your editing software. Final Cut would be the most seamless transition from iMovie, but I’d also look into DaVinci Resolve. The free version is robust and has a learning curve, but it allows to to do a lot more advanced editing.
@growformegardening5 ай бұрын
@@Gemini_Connect Thanks! I will be starting my upgrade journey asap.
@NR-rv8rz9 ай бұрын
Could you advise on the gain for my DJI Mic2 transmitter? I have it set to +1 on my Sony ZV-1 and +9 on my DJI Mic 2 receiver. When I had low such as just +1 on my transmitter, the audio was very, very low. When I raised it to +9 on the transmitter, the audio is very raspy. What should it be on the transmitter?
@mikeroche85442 ай бұрын
I don't see the link for Stereo Audio mistake video.
@jackstarr47269 ай бұрын
That was good! :) Thank you. A video showing how to do the same with GarageBand on Mac would be popular.
@Jonahalcalde2 ай бұрын
Great video! I have the dji mic 2, and I was curious if this is possible while recording through the receiver plugged into an iPhone. it seems to always record both transmitters audio on the video file. Even when put into an editing software it always has 1 audio file. Any ideas?
@TimBrownTown9 ай бұрын
Just starting to watch. Thanks so much for this one!
@DownsizingMakesCents6 ай бұрын
I use a splitter so i can use a dead cat rode micro on right, and i have my DJI mic two on left, while using a go pro, you can get a special splitter cable from rode, this way i have a way to record the background audio and my personal audio while recording. I go the action 4 specificallly to be Able to directly record with my mic 2. Come on, resolve is more professional than PP, i dont think so, haha. Switching tracks in resolve looks complicated compared to PP, i have a custom set up for changing stereo to two mono tracks, easily Larry
@TimBrownTown9 ай бұрын
Okay, I get it and I think I can figure it out from here, but if I were to select all of the audio, duplicate it to track 2 as described, are the tracks linked to the video (by default) so that I can edit the video as needed and it will remove the audio and keep it synchronized for both tracks? Or, do I need to first clip the video and get it to where I want it and then duplicate the audio track as described?
@mattlawson94555 ай бұрын
Great video if happened to record in mono is there a way to separate the two receiver audio tracks or is it baked into one track in post?
@Gemini_Connect5 ай бұрын
It’s baked into one track.
@mairajnetwork6247Ай бұрын
Thanks very informative
@Kizovibes1Ай бұрын
PLEASE I KEEP HEARING FUNNY ALIEN LIKE VOICES WHEN I RECORD IN LOUD ENVIRONMENTS WITH MY DJI MIC 2, ANY IDEA WHAT THAT MAY BE, AND HOW TO STOP IT. VERY GREAT VIDEO BTW!!
@AjaySingh-2289 ай бұрын
Good One Mam...Well explained😃
@Ebenezum136 ай бұрын
If I don’t use receiver, and just record on both mics separately, (by pressing record button on side of mic) I can have 2 audios and just synchronize in DaVinci Resolve … you need to use Stereo ONLY IF YOU record with receiver, without receiver you don’t really care but you have to do good sync in post processing
@Gemini_Connect6 ай бұрын
Fair point. I usually don’t shoot that way, but that’s true.
@AprilClayton7 ай бұрын
On the DJI Pocket 3 wireless mic 2, it only gives mono option. My videos only play sound in one AirPod. I went in Davinci and changed the audio track to stereo. It then played in both ears. Should mono be able to play in both ears?
@Gemini_Connect7 ай бұрын
Yes, mono should be heard in both ears.
@CC-gt3ro4 ай бұрын
In theory I can use a spliter TRS stereo to two mono TS cable and connect my azden smx-30 mono/stereo wirelessly to dji or rode receiver for wildlife. So i will have both choice. I can connect my stereo mic directly handheld but on a gimbal, we cannot really balance a big micro. I can fix the micro to the gimbal handle but the cable to the camera is long and heavy and create a tension on the motor. With two transmitters i can connect to the receiver without any cable. The dji mic 2 is my choice as it has also the sony camera adapter to remove the cable from the receiver to the camera fully digital 24 bits instead of 16 bits 2 channels. I hope it will work.
@Gemini_Connect4 ай бұрын
In theory that sounds like it could work. But having used a splitter in the past, I had a bunch of inconsistencies with it. Sometimes it worked, sometimes it didn’t. Hopefully your experience with it is better than mine.
@CC-gt3ro4 ай бұрын
@@Gemini_Connect i will give you my results. I plan to buy a dji mic 2 this month and found the spliter on amazon for 9$ CDN.
@arora.hiimanshu4 ай бұрын
I use iphone, hollyland lark m1 and davinci resolve, but it records mono sound. when I don't use mic, it records stereo. what to do? previously I was able to record stereo sound but I don't know how it changed. I can still record stereo using black magic camera.
@cemkar87827 ай бұрын
is this right? 2 people dialoque with wireless micrphone i choosed it mono but as recording it is stereo.
@Richard323mulaАй бұрын
Thank u
@GregoryGannon9 ай бұрын
Great explainer, as always, but now I wanna hear knock knock jokes in mono vs stereo
@tasadem207 ай бұрын
Can we do the same process with Premiere Pro too?
@Gemini_Connect7 ай бұрын
I’ve never used Premiere Pro - too expensive for me. But it is possible to do there too.