Gemmy "Big Mouth Billy Bass Restoration"

  Рет қаралды 28,655

Gemmy Master Animatronics

Gemmy Master Animatronics

Күн бұрын

Пікірлер: 37
@IDogFan41
@IDogFan41 5 жыл бұрын
The best part about this video is your personalities during the video, it’s what actually makes these interesting lol
@Colethetrainman
@Colethetrainman 3 жыл бұрын
My dad has a 1999 big mouth Billy Bass. It works to never been Worked on
@jimmytrpcevYT2022
@jimmytrpcevYT2022 4 жыл бұрын
The Gemmy repair Show ft. Jordan and Joseph
@rac-qb4dt
@rac-qb4dt 6 жыл бұрын
Please keep doing these videos, I love them!
@ebeauch123
@ebeauch123 4 жыл бұрын
Joseph and Jordan are in a repair vid...
@horrortimeproductions5504
@horrortimeproductions5504 6 жыл бұрын
This is actually the late 1999 model, the real 2000 model has the speaker more centered by the left middle screw. The circuit board placements are also different, the late 1999 model has the board on the right on the back panel, where's the actual 2000 model has a smaller more square board below the speaker on the back panel. Also the nameplate isn't screwed inside the plaque on the 2000 model, it's just melted on by a soldering iron. There's nothing else but just those three differences, I would get a new Billy Bass every year when one broke, which I would always peak inside. :) I never had any of the newer models past 2004, as I wasn't interested in these anymore. (Edit: I also remember a normal size Billy Bass with the smaller fish mechanism, which the tail and head used the same motor. I can't say the other differences about that model, besides it broke easier.)
@gemmymasteranimatronics768
@gemmymasteranimatronics768 6 жыл бұрын
Pretty neat details
@deborahmarshall4918
@deborahmarshall4918 4 жыл бұрын
Mouth makes a strange noise when batteries are used instead of adapter. Is this normal?
@dd_richart1
@dd_richart1 5 жыл бұрын
Just watched from beginning to end.
@ekawakakonahi1174
@ekawakakonahi1174 4 жыл бұрын
Force that plastic, break some more parts. PEOPLE when disassembling, take the sections apart where they connect together ( 8 screws).
@cesarcarmelo777
@cesarcarmelo777 3 жыл бұрын
Hi, i got a Big mouth. It moves ok, but the problem is the sound. It was working good with batteries, the problem started when i use a 9v input adaptador, the Big mouth uses a 6v adaptador. When i use de 9v the sound started to fade until no sound. What could happen? Is there a solution? Thanks, sorry of My English, i'm from lima Perú
@funtimefoxy9855
@funtimefoxy9855 2 жыл бұрын
you probably fried the board you need to open it and look at the board
@deborahbrasket21
@deborahbrasket21 5 жыл бұрын
Mine sings, pats tail, but doesn't turn and move mouth. The red button doesn't work either. Wish I could bring it to get it fixed.
@PastelStudios
@PastelStudios 4 жыл бұрын
there is no way mine would survive that. my plastic must be really weathered because I broke two screw holes taking mine apart. guess i'll have to deal with no mouth movement.
@groovinprops9716
@groovinprops9716 6 жыл бұрын
Nice!
@smartchip
@smartchip 5 жыл бұрын
Is gemmy still in business,
@gemmymasteranimatronics768
@gemmymasteranimatronics768 5 жыл бұрын
Ya, but not the original creators which is why they are shitty these days
@furiouszombiex5220
@furiouszombiex5220 Жыл бұрын
​@@gemmymasteranimatronics768 I also feel like the stuff they would make back then has gotten too expensive to make. Because inflation
@lakem0nst3r58
@lakem0nst3r58 6 жыл бұрын
I have a Billy bass JR but the head and tail don't move however when I press the button I feel the tail moving but not moving back and fourth same with the head I think the gear is slipping
@davidcoronilla4295
@davidcoronilla4295 3 жыл бұрын
It's a whistle piece
@davidcoronilla4295
@davidcoronilla4295 3 жыл бұрын
Or motor shaft gear
@anthonymartinez6347
@anthonymartinez6347 4 жыл бұрын
Fish restoration by Logan Couture
@billybassgemmycollector5523
@billybassgemmycollector5523 6 жыл бұрын
Can you show when is fixed in action?
@TeddyRuxpin1985
@TeddyRuxpin1985 2 жыл бұрын
Hello
@888shelly888
@888shelly888 5 жыл бұрын
My billy bass was not treated with care to it had white paint all over it and tape
@Mikeyp1054
@Mikeyp1054 4 жыл бұрын
If it was in such bad condition shouldn't you have just taken it to the river and dropped it in the water lol
@rac-qb4dt
@rac-qb4dt 6 жыл бұрын
I tried removing the tail piece one one of my fish and the tail hinges snapped!🤣
@wolfmaster873
@wolfmaster873 5 жыл бұрын
I have the 2000 version but the plauge is different
@ebeauch123
@ebeauch123 4 жыл бұрын
wolfmaster bubonic plague
@camwithextra0023
@camwithextra0023 5 жыл бұрын
That fish is 20 years old
@martysnow7902
@martysnow7902 3 жыл бұрын
I got a 1998 billy bass
@onebadcar
@onebadcar 2 жыл бұрын
PROTOTYPE?!
@Highrollinhunter
@Highrollinhunter 6 жыл бұрын
My big mouth billy bass works 100% i never used it
@davidcoronilla4295
@davidcoronilla4295 4 жыл бұрын
Just cause you never use it doesn't mean it won't break
@Mastervintage420
@Mastervintage420 4 жыл бұрын
I cut the melted pieces off with scissors
@halloweenandchristmaswithtdu
@halloweenandchristmaswithtdu 6 жыл бұрын
Do you have instagram ?
Gemmy "Big Mouth Billy Bones" Restoration
48:57
Gemmy Master Animatronics
Рет қаралды 18 М.
It Was Cool At One Time - Big Mouth Billy Bass Refurbished
25:00
The evil clown plays a prank on the angel
00:39
超人夫妇
Рет қаралды 44 МЛН
小路飞和小丑也太帅了#家庭#搞笑 #funny #小丑 #cosplay
00:13
家庭搞笑日记
Рет қаралды 17 МЛН
Restoration of a 1920s horse racing game GeeWIZ
16:20
MW Restoration
Рет қаралды 1,7 МЛН
LAVROV's interview with Tucker CARLSON 😁 [Parody]
8:34
Юрий ВЕЛИКИЙ
Рет қаралды 374 М.
Gemmy 2021 Big Mouth Billy Bass REPAIR!
24:59
TylerX71 Animatronics
Рет қаралды 2,5 М.
I Made A "Billy Bass" Bass And It Slaps
21:53
Simon The Magpie
Рет қаралды 47 М.
OUTDATED!!! READ DESCRIPTION!!! Gemmy Life Size Dancing Santa (Audio Rip)
4:33
The Proboscis Archive
Рет қаралды 22 М.
New Big Mouth Billy Bass vs. DIY Alexa Big Mouth Billy Bass
3:16
Jessie Carabajal
Рет қаралды 124 М.
WHAT MAKES IT WORK? #12 Billy the Big Mouth Bass tubalcain
17:28