Gen 1 Coyote Road to CNC Part 5: Completing the Trilogy!

[@created8757]

Nice work, I love your team’s transparency as well, it’s the only path to get better. 👏🏽

[@hugoortiz05]

Yes all those things Dave

[@patrickwendling6759]

flow numbers would be cool.. thank you

[@headgames]

we pit this head against the voodoo head on the flow bench. That will drop in a few weeks!

[@Spad68]

Would like a dyno number set up of both before with older stock head vs your newly done head. Showing the improvement on a set up or set psi with blower or turbo

[@headgames]

yeah, I would love to see that too. But, that is a LOT of work. I don't see it happening anytime soon.

[@robinator503]

How much better can they get? Anticipation....CFM next episode?

[@headgames]

we did this head vs a voodoo head, drops in a few weeks!

[@TEXAS45ACP]

the best content on youtube

[@Georgianson]

Information you'll never find anywhere

[@headgames]

thanks! I have seen some really good content on KZbin though.

[@Georgianson]

@@headgames who else would you recommend for watching may I ask?

[@HarleyJetSled]

Gen 2 let’s go #Amry

[@headgames]

We got some stuff coming!

[@goyocarreras]

oooooh what a pity Dave, neither the subtitles nor the automatic translation work, so I don't understand anything, too bad. Happy New Year.

[@headgames]

I worked on that too! I don't understand what I am doing wrong there.

[@goyocarreras]

@@headgames Dave, try this, I've seen it on my channel, follow these steps, you can only do it from a PC. I don't know if you uploaded this last video from the application or if you have something there that is not configured correctly. Turn on auto-dubbing on your channel If you've turned off auto-dubbing, you can turn it back on for your channel. Sign in to KZbin Studio on a computer. Click Settings, then Default upload settings, then Advanced settings. Check the Allow auto-dubbing box. If you want to review your dubbings before publishing, check the Manually review dubbings before publishing box. Choose either Review dubbings in all languages ​​or Review dubbings in experimental languages ​​only. Click Save. I hope this helps.

[@FlAstronauts]

Not related to video. Have you ever done a comparison a k20a2 vs k24a heads. Port 3 angle valve etc. Would like to no more. Im thinking k24a with 3 lobe vtec would be better air flow. If worked. Thanks😊

[@headgames]

K20 head flows better.

[@ericsmcmahan]

David Localio, that is some nice looking work. Thanks for posting.

[@headgames]

@@ericsmcmahan thank you sir!

[@jtokidjb]

Force Alex to run a set!

[@headgames]

lmao I can't force it. But, I stay hopeful.

[@jtokidjb]

@headgames how much flow is gained going from stock coyote gen1 bore size 92.2 to a 94mm 5.2 size?

[@patrickwendling6759]

Thank you for your knowledge and videos USA USA

[@markgummo9624]

Dave do you put the fins in all 4 valve heads even low port heads and is it all for air speed? Does it show up on the flow bench or just the race track? I don't see fins used like this on pushrod heads hardly so i'm curious. Thanks for your time and knowledge!!

[@headgames]

Yeah, for airspeed. Actually, I got the idea from the domestic side. When I was doing big chief heads is when I started doing it. That was in the late 90's. Then doing 2J's in the early 2000's people were removing the divider to the front of the port so I tried it and it sounds completely different on the flow bench. The port is much quieter without a fin, and you need ear plugs with a fin. It certainly shows everywhere.

[@markgummo9624]

@@headgames If i am understanding correctly you are saying it's quieter without a fin but you put them in your heads? I assume the fin keeps air attached to the short side better and would be a quieter port?

[@headgames]

@@markgummo9624 no it is much quieter without the fin. Because it decreases the air speed.

[@RicardoR5279]

Would be interesting to see how much and if theres any improvements to a voodoo head considering you mention it is a great flowing head already. Also comparing it to a 2014 amg c63 head as ive heard those possibly flow more or very close

[@tch632]

What CMM machine are you using? What software?

[@headgames]

no cmm. We have a centroid 5 axis with mastercam

[@Dirtfloorfab]

Whats cnc for gen 1 cost?

[@headgames]

$2600 for disassembly, clean, CNC port, bronze guides, valve job, mill and assembly + valvetrain.

[@GTRliffe]

show us everything involved in setting up a head properly please allot of us are youtube trained and DIY allot of things so any schooling is good especially an efficient way to shim a solid lifter head preferably a way to do it in the car otherwise love the channel and keep doing what your doing

[@markbrouk7857]

Wonder if you could 3D print heads to test your porting on so you dont have yo practice on real heads.

[@headgames]

you could do it in plastic but I like looking at it on real heads.

[@ICTPerformance268]

🇦🇬 ⭐️⭐️⭐️⭐️⭐️. Happy New Year. 🙇🏾‍♂️

[@Sir.VicsMasher]

Coyote swapped M240i X-drive would be cool on the street with fuel and boost now that they have adapters and controllers.

[@georgedreisch2662]

Sounds like someone fuk’d up on the file save…

[@headgames]

maybe!