Gen1 V8 S10 long tube race headers install 400 SBC ( Hedman PN# 65855 ) Part 01

[@the4flatgarage]

Vital information helping a lot of people building an S-10. The power advantage over the shorty's will be felt, I'm thinkin' plus the sound is going to be rumbly. Can't wait for the next installment. Awesome, awesome, awesome!

[@rizzoid]

Probably easier to flip them over and let them go straight out the hood, tractor pull-style. Gotta love S10s!

[@TPVPRO]

Yea for sure !😆 I knew this was going to be a bit of a challenge. The good news is it forces me to fix all my old stupid ish.

[@Stainlessslayer]

Yep i got the homeade motor mounts too. The shortys with 3 inch collectors took some effort to fit

[@hotrodplumber]

Looks good! Serviceability is key. I moved my flanges off the collectors to a point that I could reach the bolts easy.

[@frankchapa4165]

I counter sunk the header bolt from the back side and tacked them with the tig on mine

[@vans1107]

you could probably solve alot of the turning radius problems with a narrower wheel/tire, those look fairly wide for front runners. A 4" wide wheel and narrower tire with less offset looks like it would clear no problem.

[@joeberry3667]

Looks good! I had issues with my steering shaft rubbing on number 7 when I hit a lot of HP. I had to put a torque link kit on. The engine would pull up and hit my tube onto the steering shaft locking my steering. I then would have to peddle it while steering. Just a heads up. You may not have that issue

[@TPVPRO]

I'm hoping I don't have that problem.🤞 I will just solid mount my ish if that happens.

[@ronnelson7828]

You could dimple the tube for clearance if it's a problem. Great video! 👍🍺

[@randallvest1867]

Great vid man.

[@remy9mm]

the labor of love good job TPV looking like she can poop now without having problems

[@bevinsracing]

Hey man. Did your afr heads not come with the Stahl flange "divets" on head so you can drill and tap them for the Stahl headers? That's what I did for my afr 227s in my s10

[@michaelwickware5038]

How many inches clearance between header and frame?

[@paulpowell195]

Nice bro

[@maldo72]

omg I have a headache the headers are tight dammm

[@J5BAIL]

What headers are you using?

[@timrayburn2461]

What is the primary tube length ? Summit didn't show it.

[@TPVPRO]

1-7/8 3.5 collector

[@nickmusgrove6268]

How is the turning radius

[@TPVPRO]

Not great but not bad with the 1" spacers

[@wisheye1]

Please cage it!

[@TPVPRO]

I am 🍺

[@wisheye1]

@@TPVPRO 🍻

[@philipmazzuca2269]

Lots of liquids for this lol

[@TPVPRO]

Yes sir a lot! 🍻🍻🍻🍻🍻🍻🍻🍻🍻🍻🍻🍻🍻🍻🍻🍻🍻🍻🍻🍻🍻🍻🍻🍻🍻🍻🍻🍻🍻🍻🍻🍻

[@philipmazzuca2269]

😂

[@tnoutlaw73]

i have a set of shorties for anyone interested.

[@TPVPRO]

Me too 😆

[@tnoutlaw73]

@@TPVPRO lol im going big block. cant use them now

[@f-bodyjon2189]

This….does not look like fun