Gen4 Jimny - Cleaning the AirCon

A short video on cleaing the Air Conditioning and upgrading the pollen filter in a Gen4 Jimny.
The high filter Pollen filter in this video can be found here: www.bigjimny.com/store/aircon...

[@Mario_UB]

Best video I found on how to clean the AC and replace the filter. Helped me a lot. Thanks from México!

[@PopkitesMomechanic]

Hi from Barbados. Me and Popkite (JB33) want to thank you for all the help you've given us since I got her❤. This vid has made it easier for me to clean behind the scenes

[@paulmanta]

Very informative, especially the upgraded filter ! Id love you to do a video on heated seats and the extra wiring/parts needed to fit them into a commercial Jimny. I did the heated door mirrors on the strength of one of your previous videos and that went very well.

[@mohammedalmgbil9169]

Hello , how much AC oil to add? And what is the best oil? Thanks

[@julitoe39]

Hola, no se aprecia bien cuando aplicas el producto, se debe ir retirando el tubo a la vez que se aplica producto, para que se reparta por el conducto?

[@bigjimny]

Las instrucciones te dicen que rocíes la placa del evaporador que es donde se forma la bacteria.

[@julitoe39]

@@bigjimny muchas gracias por la respuesta!!

[@redscooter32]

2:27 hi there! May I ask how do you remove the resisitor pack? i squeezed the tab to the right and yet the resisitor will not budge.

[@bigjimny]

Its only the tab that holds it in so its a matter of keeping trying

[@redscooter32]

Got it after half hour.. have to push the tab outwards..thanks much

[@vo2098]

Ok the upper tab will need to pushed out BUT the resistor (as you see it) will not come out, it will SLIDE UP. No wonder I couldn’t get it out by pulling it OUT. Unfortunately on the video, his hand is covering the cam while he was going this.

[@mohammedalmgbil9169]

Hello Martin, do you have any idea how many quantities that I need to refrigerate?

[@bigjimny]

Hi, sorry I am not sure what you are asking?

[@mohammedalmgbil9169]

@@bigjimny AC gas quantity “Freon gas”

[@bigjimny]

@@mohammedalmgbil9169 360 ± 20 g (12.6 ± 0.705 oz)

[@mohammedalmgbil9169]

@@bigjimny thank you mate

[@RAZERSDRIVER]

So you can access evaporator through blower resistor hole?

[@bigjimny]

Yes, is a small opening but enough to get the tube in. It does get stuck so wiggling will be necessary to get it out.

[@RAZERSDRIVER]

@@bigjimny how do you know that this place leads to evaporator? Can you see it or feel it somehow?

[@bigjimny]

@@RAZERSDRIVER I read the workshop manual, it has the evaporator shown as being just above the opening

[@RAZERSDRIVER]

@@bigjimny OK, thank you!

[@vo2098]

Or you can buy an endoscope which is pretty reasonable nowadays.