How to easily move plywood by yourself using three methods: 1) 19' rope 2) Dowel rope hook method 3) Store bought panel lift Visit us at www.genewoodsho...
Пікірлер: 192
@Breal1917 жыл бұрын
Glad I got these ideas from you. I was about to drop $50 on a gorilla grip. For the amount of times I would use it, I guarantee you that when I need it I won't find it at that precise moment. Thanks for sharing!
@NAVLiveOfficial2 жыл бұрын
Sir, you are a back-saving AND time saving genius. I'm trying to carry 20 full size plasterboard (drywall) sheets through the house on my own. Thank you!!
@GeneLonergan2 жыл бұрын
Glad to help
@SF-fm7ov10 ай бұрын
The plastic carriers are cheap and work well from Home Depot.
@harryalvarez-garmon88408 жыл бұрын
I have been watching loads of videos about lifting sheet goods and this is by far the most useful! Thanks!
@toobad414 жыл бұрын
Great tips. I did not have a wood dowel but I did have a 3/4” piece of PVC pipe that worked just as well. I had some 1/4” parachute cord that I used instead of rope and a piece of right angle steel shelving bracket that I bent on my vice to set the plywood in. After assembly as shown in your video it worked great.
@calvwyne8 жыл бұрын
loved the string on the plywood trick. Thanks!
@2old._.3 жыл бұрын
This is THE video. Wonderful demonstration and presentation of simple, effective tools. Thank you!
@GeneLonergan3 жыл бұрын
You're very welcome!
@takeniteasyfriend6 жыл бұрын
Thanks. You just saved me from back strain building my shed. Splendid ideas
@Mrd737678 жыл бұрын
Thanks! I found this tip extremely helpful.
@douglasharley24404 жыл бұрын
my dude, you are a plywood-carrying *ninja* thanks, the dowel+rope+square hook looks like a winner to me. :)
@mariebernier30764 жыл бұрын
What helpful, simple, elegant and almost free solutions!! Thanks so much for giving this to us. Your mindset is awesome.
@GeneLonergan4 жыл бұрын
Wow! Thank you.
@mistercarstens Жыл бұрын
Thank you. The sheet bend is a new knot for me. I know it will come in handy!
@GeneLonergan Жыл бұрын
Thanks for your comment.
@kithdhasengh2013 Жыл бұрын
Best solutions are often the simplest! Thx great vid!
@ScorpionRegent4 жыл бұрын
Gene Lonerman - Good video. Being a knots guy, I'm partial to the sling done with a simple sheet bend. In addition to its simplicity I like that it's stable because it lifts at the corners and not at one fixed point. You could also tie up a similar sling with a bowline loop on each end if you don't quite have 19' of rope. If the rope is too long, (why have 19' when you can have 20 or more,) you can add a figure eight loop on one end, or even both, to take up of the slack. The toggle and hook is a nice quick build with lots of alternative uses.
@rek5507 жыл бұрын
Just had one of those "why didn't I think of that" moments. Thank You. I would assume these methods would work well with drywall?
@willnettles20517 жыл бұрын
This is cool. Thanks for sharing. Like a lot of guys who've schlepped plywood for years, these widgets arrive a couple of different ways. Like the orange thing, we see it at the store and think, 'huh? that should work' or the string devices, we think. My arm hurts this week, how can I carry around sheet goods...? and we set-out to find a solution--this is the most fun, Often we have an idea, make the widget, then... we immediately see how to make a better, simpler one, and finally we see something in a completely unrelated area--nothing to do with woodworking of any kind, and we get a flash of other ways we could use that. What might make an interesting video is how about a list of all the things that we wish there was some solution..... Tablesaw adjustments, most of the little digital tools, micrometers, etc don't seem to take into consideration the inserts. Also fine adjustments. Sure we can squint, but if there's a lever, and no slop, we could adjust routers and table saws up and down by thousandths. How about if it attaches to the base, table surface so we don't need a third arm? (btw I've been saying for years now the biggest tool innovation will be a robotic third arm and hand. Guys will mortgage their houses to buy the expensive early versions...and soon seen the need for a fourth arm...)
@evelynbecky6 жыл бұрын
I like the one you made with the dowel cause it's small and customizable...thanks for sharing.
@Dutch19547 жыл бұрын
And to think I was going to go out and buy one of those store bought doohickeys when I got some scrap plywood and 2x4's laying around....Nice tip ! Thank You
@samuelbhend25215 жыл бұрын
First solution is the best one. But still I would make two major improvements to it: 1.) Take the rope on the outer side of the sheet, so the sheet sits under your arm. No need for the second hand you don't need to walk "twisted", wich gets quite fast quite painfull. 2.) put a dowell in the middle too, to get more comfortable grip Notice: this comment is NOT meant to criticise, but to share my ideas about improving an already great idea!
@billcoley85203 жыл бұрын
Thanks for the first method. I liked it because I knew the other ways
@babyd7552 жыл бұрын
They have marketed inventions for carrying large sheets for purchase in big box stores, but nothing beats a free, time tested and true method! Cherry on top that they can all fit easily in a vehicle, tucked away as well. Thanks for the tips!
@GeneLonergan2 жыл бұрын
Thanks for the comment
@beforhorn3 жыл бұрын
I've benefitted much through the years from your videos. Thanks!
@GeneLonergan3 жыл бұрын
You are so welcome!
@rafah43298 жыл бұрын
great tip! thanks for taking the time to post this.
@greeneyednerd2 жыл бұрын
This was such good info, that I automatically clicked through to your channel. Great job!
@ralphyo62857 жыл бұрын
Simple yet very effective. thanks for sharing..
@swagtofly1238 жыл бұрын
The string with the wood and hook is my favorite I'm going to be using that one on my job site
@GeneLonergan8 жыл бұрын
+Elmo Garcia I like that also. Gene
@laragreene83284 жыл бұрын
THANKS SO MUCH!! You made that so easy to pick up my plywood it totally made my day!! (I am female,btw,and definitely not use to carrying heavy plywood even for home projects! Now its so much easier! :-)
@GeneLonergan4 жыл бұрын
Glad I could help!
@mkelly30015 жыл бұрын
Nice one man, 14 sheets to move this helps big time!Thanks
@AntonyBartlett Жыл бұрын
This is what youtube is about. Useful content that looks like your neighbor made it.😊
@GeneLonergan Жыл бұрын
Glad you likedit.
@CarlosPortoPhotography9 жыл бұрын
Great Tips. Thanks for sharing it.
@GeneLonergan9 жыл бұрын
Carlos Porto You are welcome Carlos. Gene
@mattfortepleaseleavemealon50728 жыл бұрын
Great video Gene, nice little trick to remember when I need to lug around on my own.....
@Clambelly7 жыл бұрын
GREAT IDEAS ! Thanks for sharing.
@gpvaneron1584 Жыл бұрын
immensely useful video. thank you!
@GeneLonergan Жыл бұрын
Glad it was helpful!
@leslieroberts60293 жыл бұрын
Thanks buddy, this is very helpful - 5 ft tall woman here going to put this to the test. Haha
@GeneLonergan3 жыл бұрын
Good luck!
@normansidey52585 ай бұрын
Excellent tips, thanks for sharing.
@GeneLonergan4 ай бұрын
Hope it helps.
@extraart12 жыл бұрын
Really like the rope method- thanks
@kullcraven10 жыл бұрын
Those are pretty good, i moved thousands of sheets of plywood and melamine over the years as a cabinet maker. Tho we just grabbed from the bottom and went with them on our shoulder. This looks alot easier lol
@GeneLonergan10 жыл бұрын
Hello Kullcraven Bushcraft. I know what you mean. Sometimes I would end up hurting myself in a funny spot; not being able to move my shoulder, pain behind my knee, lower back. Weird. Must be age. Gene:)
@jimchallender46162 жыл бұрын
Good thinking - My next projects. Thanks!!!
@GeneLonergan2 жыл бұрын
Great!
@waynemiller607010 жыл бұрын
Great tips gene. Much less expensive than the massage I just paid for after moving plywood yesterday. ;)
@GeneLonergan10 жыл бұрын
Ow. Gene
@jimsmithsr.91068 жыл бұрын
+wayne miller but less fun...
@brianmosse3 жыл бұрын
I thank you and so does my back, cheers mate
@GeneLonergan3 жыл бұрын
Glad to help
@SitesThatSuck7 жыл бұрын
Stanley panel carrier at home depot costs $7 and works great.
@1lupus8 жыл бұрын
Just saved me a sore back. Thanks.
@josvanr7 жыл бұрын
sheer genious ! THNX
@AMC-eq3jr2 жыл бұрын
When carrying sheet goods, watch out for the wind. I went sailing one time. Thanks for sharing.
@GeneLonergan2 жыл бұрын
Good tip!
@tyronesunde83147 жыл бұрын
This is a good idea. Are there any suggestions for solo hanging 3/4" plywood on a wall?
@TheArozconpollo2 жыл бұрын
Thank you brother, just what I needed!
@GeneLonergan2 жыл бұрын
Glad it helped. Thanks for the support.
@trishrupard45494 жыл бұрын
Thanks, this is ingenious and very helpful
@big1finger7 жыл бұрын
Great ideas, I use the store bought one myself. A few years back I sat on porch watching boy on the roof of 3 houses tearing off for new roof. Suddenly a guy about 5 foot 8 went to the load of sheathing that had been delivered. He cut the tie downs, slid the top sheet by the end and tipped it down where he could get a hand in the middle of the 4 foot end, grabbed the panel with his right hand moved the panel to the 14 foot ladder, climbed to the roof level and threw the panel off on to the roof. He did about 10 of these before he stopped and barked something in Spanish for someone to move the panels. I asked a;; the roofers in town it they could do that and the answer was HELL NO. I figure if I need to move 4x8 panels I would get myself a hard working Hispanic that can climb a ladder with a 4 x 8 sheet of plywood and save my back, whats left of it.
@dandavis83005 жыл бұрын
The guy's gonna wear his back out and have to get on some kind of disability early 40's.
@ScorpionRegent4 жыл бұрын
You have to respect solid "MexiCan" work ethic. No one can accuse that guy of not earning his wage.
@66otnt6 жыл бұрын
Another great idea. Thankyou Gene!
@monkwerks8 жыл бұрын
Thank you!
@tamdaonguyen84868 жыл бұрын
I enjoy your video. Thank you for sharing your knowledge, experience...to people. Good karma Bro !
@frankteslik52256 жыл бұрын
Great tips thanks!!!
@eddyoddrod6 жыл бұрын
I like the rope and dowel
@yuriportes26068 жыл бұрын
Great tips, Mr Lonergan! Thanx!
@mulengankondwa49577 жыл бұрын
That's awesome, thanks alot for the ingenuity!!!
@sonnynguyen80124 жыл бұрын
Thank you for great idea.
@philiprobert13323 жыл бұрын
Hi Gene, So glad to discover your site. Great projects that we all need! Well done and keep it up forever. :-)
@GeneLonergan3 жыл бұрын
Welcome aboard!
@mortega5613 жыл бұрын
Thank you, very helpful
@theHAL90004 жыл бұрын
Thanks! Very effective ... and cheap.
@eNeVeFamily3 жыл бұрын
Great video.
@GeneLonergan3 жыл бұрын
Glad you enjoyed it
@spencercolgan7 жыл бұрын
Good job gene!
@variabletime7 жыл бұрын
Long hay hook works good too.
@UrquidiGuitars2 жыл бұрын
Thaaaaaaank you sir! Good man!
@zhanbatyrmakabaeff60593 ай бұрын
Thanks from Kazakhstan 🫂
@GeneLonergan3 ай бұрын
I appreciate it.
@evanparker5 жыл бұрын
superb tricks! thanks
@loogielarva7988 жыл бұрын
thank you for the tip, this was useful.
@pkbuilderfamily.79343 жыл бұрын
Thank you.
@spoletosposi2 жыл бұрын
👏👏👏👏👏👏👏 well done !
@Dreamster3997 жыл бұрын
Great tips.
@jameshalliwell41218 ай бұрын
Thank you 🙏
@MrMiles407 жыл бұрын
Nice- I'm gonna make each one. Cause I can rarely find anything one specific tool at any given time. LOL
@seanmcaleavy23696 жыл бұрын
Hahahahaha no shit! Me too!
@stephenfiore99606 жыл бұрын
Ingenious
@Timbolele3 жыл бұрын
Brilliant! Thanks
@GeneLonergan3 жыл бұрын
Glad you liked it!
@DiscoFang4 жыл бұрын
The last one is great if you like squashing your fingers. You missed the most basic addition to make it line the store version.
@sajidullah8 жыл бұрын
nice
@daniellm20019 жыл бұрын
Gracias... Es la primera vez que veo algo así...
@efczmrbavas987911 ай бұрын
Спасибо большое. Всё чётко и понятно.
@dixsigns17177 жыл бұрын
Thank you, very informative.
@darrylportelli3 жыл бұрын
Genius mate ... Used a ratchet strap and i didnt even have to learn to tie that knot hhehehehe
@محمدالعجيري-ر5م3 жыл бұрын
Thank you for sharing this with every one I am willing to buy a 122×244 cm white board sheet soon and I'm thinking about transporting it in publish bus by hanging out somehow outside the window.. but still thinking about how to fix it from the bottom so it's not going to hit cars next to bus when turning to its direction
@pettytheft792 жыл бұрын
What about carrying panels diagonally up stairs?
@ZenyWorld4 жыл бұрын
Thank you sir.
@petermead75103 жыл бұрын
Thank you!!
@GeneLonergan3 жыл бұрын
You're welcome!
@jeannekolbuss353 жыл бұрын
Any easy way to move a full size mattress by yourself ?
@GeneLonergan3 жыл бұрын
I wish! Thanks for the comment.
@ellismedavoy73145 жыл бұрын
Excellent!
@SKURRASKURR2 жыл бұрын
Thank you
@johnpoe88877 жыл бұрын
i bought a gorilla griper and made a swing arm for my track saw table, easy, easy, EASY !
@divyajnana10 жыл бұрын
excellente tamale, 19' of rope, great!
@GeneLonergan10 жыл бұрын
divyajnana Thank you. Gene
@10331418 жыл бұрын
very good. thank you sir
@phillertora75643 жыл бұрын
For those of us too cheap to spend money on things like this - THANKS
@GeneLonergan3 жыл бұрын
Glad to help.
@jetblackstar4 жыл бұрын
damn this is simple. Love it. Always carrying rope anyway.
@GeneLonergan4 жыл бұрын
Well said!
@silasgroenning11 ай бұрын
Will it work up the stairs :0?
@jamelynch44745 жыл бұрын
thanks a bunch
@davidward17826 жыл бұрын
no criticising whatsoever but i have to move 150lb window frames, would this still work.? i found your video gave me certain ideas and if they work i'll get back too you, cheers mate.
@OffGrid96 жыл бұрын
Pretty sure it would. The rope-method might be a bit painful with 150 lbs, but with a doubled-over leather glove as a cushion, should be OK. I've used that rope trick on plywood, but just a single rope with a loop at each end...don't use nylon, stretches too much. I used plain hemp. I think maybe the DIY wooden handle would be better, but you might want to make it a bit wider, maybe 10 inches, give you more glue contact and room to put in several more screws? I'd hate to see you bust all the glass out of one of those big frames.
@charlescoker77522 жыл бұрын
Thanks!
@GeneLonergan2 жыл бұрын
You bet!
@stephenmitchell832410 жыл бұрын
Hi you wont to sell your idea going to use it this week
@GeneLonergan10 жыл бұрын
Have fun Stephen. Gene:)
@cameriqueTV5 жыл бұрын
If you got an old 4-legged walking cane from someone, those work great!
@SF-fm7ov10 ай бұрын
I might slide a piece of 3/4" pvc on the rope to save my fingers.
@psychobunny328 жыл бұрын
pretty cool
@GeneLonergan8 жыл бұрын
+Missy Rabbit Thanks Missy Rabbit
@seanmcaleavy23696 жыл бұрын
Great tips! Thanks! I just subscribed.
@lw2163167 жыл бұрын
ahh.....man the tool maker.... how many times I've had to invent something to take the place of having a 2nd pair of hands or legs to help ! ...and to use what materials I had available.... Did you see the movie Apollo 13 ? they invented an air filter out of duck tape and scraps and saved the lives of the 3 astronauts ! I've noticed that farmers are really good at this !