General Electric Dryer Cabinet

[@noonzyc523]

MY MAN.... you just saved me a ton on just a belt replacement quote. I really owe u a few Corona's, my man. You're the best. Awesome video and perfectly detailed. Thank you sir

[@beckygerber6282]

Omg . I’ve been trying for 30 minutes trying to put that belt on . I went to another site and seen your video and had it on less then a second . You saved me a frustrating experience . Thank you so much not one video showed how you can put that pulley on a hold . Life saver you are .

[@DJ_Kitty_Scribbles]

Thank you for the excellent step by step instructions, they worked great in being able to fully clean out our Hot Point dryer. I feared for the worse of having to replace the unit or the heating controls, but a feel clean was all it needed.

[@davidahedley8186]

Thank you so much for your videos, 2 years ago I was able to replace a solenoid by watching one, now I am back to handle a drum problem!! Couldn't do it without you :)

[@theapplianceman]

Thank You For Watching My Videos Click on the link below to check my website www.do-it-yourself-washing-machine-and-dryer-repair-help.com/ Angel theapplianceman

[@sammi-joreviews1135]

Wow that gives me hope. Fingers crossed.

[@davidahedley8186]

@@sammi-joreviews1135 I fixed mine! Fingers crossed for you too!

[@billyshake]

Much better ar teaching than most - thanks man.

[@lb6649]

Thank you so much! You saved us from having to spend A LOT of money on a new dryer!

[@alexb.1524]

Excellent video and at a perfect speed. Thank you sir

[@luckyhiker3434]

You are a very good instructor!

[@wm973]

Thank you for showing this video. It was very helpful. Mine is an old GE dryer and is a little different but close to this one. My belt arrives tomorrow so I need to blow out all the lint inside so the install is nice and clean. Thank you.

[@corycyr6677]

Thank you so much! My family has really been helped by your vids!

[@theapplianceman]

Your welcome

[@soundmindtv2911]

Thank you! Just what I needed 🙏

[@kenlorenz9328]

Thank you! What a demonstration I learned a lot..

[@theapplianceman]

If you want to be able to fix your GE or Hotpoint dryer. The first thing you need to learn is how to take it apart and how to put it back together properly. Learn how to do this and everything else will be very easy.

[@justinpham4246]

very nicely done! thank you

[@quangluu5247]

Great Video, great presentation, very helpful,thank you

[@theapplianceman]

Thank You Click on the link below to check my website www.do-it-yourself-washing-machine-and-dryer-repair-help.com/ Angel theapplianceman

[@micheljauvin3536]

excellent demo

[@richardljohnson9727]

Great video very informative My tension pulley has no spring action is it broken?????

[@sammi-joreviews1135]

My dryer (GE DCVH515EFWW) area below the drum on the front has a metal cover all the way across. Is there someway to remove the back panel or the metal panel in front without it collapsing on me? The dryer was scrubbing & squeaking. I should get the upper bearing & gliders with felt tomorrow, well today as it’s after midnight. I really need to vacuum the bottom left side of the dryer bc the exhaust pipe had come loose in the dryer. My dear husband didn’t put the little screw in that holds it in place 🤦🏽‍♀️🤦🏽‍♀️🤦🏽‍♀️ when we got it. I was able to get the exhaust pipe returned to place, complete with the screw replaced. I’m hoping to get the lint out, possibly test the element, & make sure the upper bearing with gliders work okay. Goodness knows we can’t afford a new one. Any advice is welcomed & appreciated.

[@charleslawson6824]

Excellent tutorial. I cannot emphasize enough about the long-sleeve shirt. (I have the scrapes to prove its necessity.) Unfortunately, something did not go together quite right as I now get two quick beeps when trying to turn the dryer on. Any quick advice about what did not get reconnected properly? (It is not obvious from visual inspection.) Thank you!

[@VMATT500C]

Great vid.

[@eduardoangeles4412]

Una pregunta amigo. Mis escaleras están muy angostas 23 inches wide y necesito una secadora de gas. He preguntado y dicen que solo la marca Speed Queen se puede desarmar. Y que el drum mide 22.5 inches. Sabes tu de otra marca que se pueda desarmar y que el tambor sea de menos de 23 pulgadas de diámetro? Gracias

[@armyboy0579]

So, there is no thermal fuse?

[@theapplianceman]

There is but is not called a thermal fuse. It is located on the top right of the heating element housing with 2 brown wires connected to it

[@armyboy0579]

@@theapplianceman change the 30 amp fuse still won't turn on so it must be that top right sensor connected to the brown wires.

[@theapplianceman]

Check the parts on these videos www.do-it-yourself-washing-machine-and-dryer-repair-help.com/startingGEelectricdryer.html

[@Lizz033torres]

You cant take this dryer apart from the back panel?

[@wm973]

No. Mine is solid 3 sided for rigidity. Mine's very old but simple dryers are all about the same. The back panel holds the heating element and drum bearing so it needs to be strong and rigid. There are some access holes on the back but they are not very helpful. This is my first attempt at repairing a dryer. Other than the washer being placed right next to the dryer made it a lot harder to get the dryer out. Hope this helps..

[@Lizz033torres]

@@wm973 so I ordered a new start switch and it wasn't it. I had left my dryer unplugged for 2 days after that. After reading and watching about 30 videos... I came across a comment that said to *turn the drum 10 times* in case a coin or something is caught and it isn't allowing it to turn or start. I did this, pushed the door switch about 4 times and turned the timer setting, pushed the start button AND IT TURNED ON 😳😅 after 1 week of it not working and us trying everything else

[@wm973]

@@Lizz033torres Congrats on getting it running. If you have an older dryer it sounds like a loose connection. I hope it doesn't happen again but if it does, carefully remove the connector/s and check if they are corroded or loose. Spade connectors are easier to check than multi connectors. Do you remember the order which you truned the drum/door switch/ timer/ and start button? HAHAHAHA

[@Lizz033torres]

@@wm973 1st turned the drum a full 10x, 2nd pushed the door button 4x, 3rd moved the knobs no particular order lol, and then pushed start and it's working 100% now🤣

[@thefrugallandlord2226]

Gracias amigo, Buenos noches habla por manana.

[@theapplianceman]

Thank You Click on the link below to check my website www.do-it-yourself-washing-machine-and-dryer-repair-help.com/ Angel theapplianceman

[@HighDesertForgeIronworks]

Stupid! Stupid! Stupid Me! I just went thru most of the video until I figured out that this is an ELECTRIC dryer! Mine is GAS! But I hope this helps me open up the cabinet to find the igniter n stuff. Wish Me Luck

[@JuanMorales-ks4ll]

where is the thermal fuse