Vintage World Hand Dryer

[@1964catt]

Just one of those things that you never thought about being vintage

[@general0ne]

Thanks for the info. I was suspecting this was from the 50's or 60's, judging only by the style of the motor and the condition of the grease in the bearings. Yeah, they're still available, in models ranging from 115v 15 amp up through 277 volts, and have the option of an automatic sensor, which I would suspect uses a solid state timer rather than the synchronous motor.

[@chardelraconner7324]

larger household appliance adapter rotation increase at compressed independent function

[@ogorekkiszony7236]

Oh my god, I saw and used this exact dryer at a summer camp I went to a few years back. Place fucking sucked, looked like it hadn’t been renovated since the 60s/70s. Now I would be fine with that if they kept it properly maintained, but to say the least it was NOT properly maintained (mice)

[@Daconthocon78]

why won't it be in home bathrooms?

[@whoisthisguy724]

My local bowling alley has one of these with the exact same nameplate! It doesn't work unfortunately...

[@Matt_Electronics]

It's been quite some time now; did you end up getting it working?

[@EWPA14]

Wow this 1 must be super old! I've never seen 1 w/ that label before, & that font looks very old. I know of a Model "A," I think it's slightly newer than this 1, probably from the 80s, where when you press the button, the heating elements turn on, & it keeps clicking, but the motor never turns on. I feel like the motor on that 1's also seized.

[@douro20]

Any idea why the motors for these things are so expensive? A new Model A dryer is about $375...

[@amberbludnick6402]

Very good and a good value

[@general0ne]

I should be getting to it sometime in the next week or so.

[@vintagesimplexfirealarmsof6440]

To fix it put in 3 in 1 motor oil or zom Om sprout in bearings it helps big time

[@sethhorst6158]

My Middle School I go to has one similar that's rusty and is missing all the labels and can be heard from the Hallway and also puts out a lot of heat..

[@douro20]

That is probably the oldest electric hand dryer still in production. They were first made in 1948. That unit probably dates to the late 1950s or the early 1960s.

[@general0ne]

No idea... Motors are expensive in general, though, due to the high amount of copper in them. Even a small motor for an older Nutone bath fan runs around $50 or more new. I wouldn't suspect the motors on these need replacing very often, though, as long as the bearings are kept lubricated.... motor brushes have a 3 year warranty on the new units.

[@general0ne]

Not bad if you need a parts unit. Though it wouldn't be of much use for anything else without the outer cover.

[@general0ne]

Yeah, I discovered that with a bit of searching... Though I'm sure the sensor models have a solid state timer.

[@douro20]

Model A dryers still very much use the same time switches.

[@DavidLeon140m3]

Did you get it working?

[@general0ne]

Not yet. I actually pulled it out of the box to work on today. Keep an eye out for a video of it in the next few days.

[@hdyudu]

i agree the price of copper today is ridiculous that why we hear more of air conditioners getting stolen or rip apart on the spot because the copper condensing coils

[@kagome122885]

It has to be at least from 1973 or before because it says cycles instead of hertz.

[@DavidLeon140m3]

also you could rebuild the motor which is cheaper than buying a chicom motor

[@general0ne]

That is my plan.

[@douro20]

+David H The newer Fasco motors I believe are made in Mexico...

[@psalerno123]

I think according to the serial number this is either a 1976 or 1956 model, but I am not sure.

[@general0ne]

Not yet, unfortunately. Too many other projects and other things going on lately.

[@general0ne]

Thanks!

[@demonblooddrinker7671]

Update?

[@douro20]

You can still buy the motors for these...

[@redneckbryon]

Sorry, I've seen people have those in the house before

[@general0ne]

There's no reason they can't be used in a home. They're just more common in commercial installations.

[@hdyudu]

i guest alongs you power it on dedicated circuit for it you can put it anywhere

[@condimentking14]

Mine looks identical to yours except right where it says world dryer on you're unit mine says national dryer corporation Chicago Illinois I don't know if they're maybe the same people because I tag on mine looks just like yours exactly except where it says that anything you know about that I'm trying to figure things out about it so I need to find someone who'knows stuff

[@theofficial3train]

i have an xlerator

[@NothingToSeeHere-d4r]

I would say this is from the 70s.

[@DavidLeon140m3]

My video of my EXCEL dryer without the cover

[@MixerVM]

Probably from the early-mid 1950's

[@general0ne]

Yeah, for about $150...

[@redneckbryon]

I have hard of peiple

[@chardelraconner7324]

downhill

[@chardelraconner7324]

headlamp in bedding aesthetic

[@chardelraconner7324]

sundial compressor setting

[@chardelraconner7324]

thermoistat rain downfall knob function in shower aesthetic of eco effecient diffuser density absorbtion

[@chardelraconner7324]

motorcycle gas tank head unit in automotive force induction aesthetic to exhaust flush