PEPAKURA Designer | Pepakura Commonly Asked Questions | Pepakura FAQ | Pepakura Tips and Tricks

In this video I am covering some of the most common queries and questions associated with pepakura white demonstrating solutions parallel.
Download link for pepakura is below:
tamasoft.co.jp...
You will need to buy key code to unlock all the features of the software
I am hoping I have covered all the important queries. In case there is any other query do comment or contact me on [e-mail]
Happy Crafting
Genie Crafts
Paper Cutting | Paper cutting Art | Paper Art | Pepakura Designer

[@haneenal-yaseen9659]

I always flip the model so the numbers and lines are inside, if I didn't flip it the numbers will be outside, do I do something wrong? what is the problem?

[@GenieCrafts]

When you don’t flip, the side which appears on the printout is actually the inside of the modes. So when you construct the numbers will hide inside. And if you flip the model the reverse will happen

[@joginders92]

it is possible export edge number also in .dxf file ?

[@GenieCrafts]

Not sure. I have never had the opportunity to work with dxf files

[@shashankgs3008]

Can I add a crease line ( fold line ) on pepakura designer Some folds aren't recognised by pepakura designer

[@GenieCrafts]

All fold lines are automatically represented. If a fold line is not coming then this means that the two faces it is collecting are not at any angle and hence it gets ignored. If I remember correctly there is an option which will allow you to show the ignored lines too. I will tell you later today.

[@shashankgs3008]

@@GenieCrafts thank u so much

[@ramakantchauhan8254]

Can i print the 3d craft without keycode

[@GenieCrafts]

Yes

[@JoyinCrafting]

thanks for this info. I've always wanted to try the paid version of this app. I want to make a dachshund low poly sculpture. lol

[@GenieCrafts]

Welcome dear. There is a free template available at animapapir.com Do check it out

[@arhatgoyal9865]

pls tell how to delete some parts that we dont need after unfolding....pls pls

[@GenieCrafts]

There is no way to delete the parts in Pepakura. What you can do is to put all unwanted parts on last page in working area and ignore it during printout. Or you can correct your 3D model in some modelling software and then unfold it again in Pepakura

[@arhatgoyal9865]

@@GenieCrafts thank you so much

[@anneendanish4871]

Hello please reply to this. I need to make a Captain America helmet but when I type my heads height the corresponding sides according to the computer is not equal to my real head, so can I customise height width and the volume of my mask, also even when I get all of that right I couldn't fit my head inside the mask, how can I fix that. Please help, reply as soon as possible, also how can I correctly measure the height and width of my head

[@GenieCrafts]

Ok. So one of the issues with Pepakura is that it’s default measuring unit is mm. So please first check if the measuring unit in your 3D modelling software is also mm or it is something else. If it is something else then put mm equivalent of your dimension in Pepakura. That’s my initial assessment of the problem but if you can share the image of the 3D model I might be able to troubleshoot better

[@SakosTechSpot]

You have helped me greatly learning all of this papercraft stuff. I'm going to start on my first project with this knowledge. Subscribed!

[@GenieCrafts]

Thanks a lot friend and do share your creation with me

[@tomasgarcia8088]

Hello, do you know how to fix a model that has a circle, but when you unfolded the model the circle gets deformed?

[@GenieCrafts]

Please share example on [e-mail]

[@jmedina4627]

how to flip the print layout, i mean flip it horizontal, for ex: i have a leg model and its the left part only, make sense? this would help me so much

[@GenieCrafts]

Use the invert option during loading the model

[@nhanlqn1846]

How do I specify an area to add texure or how to split 3d model to 2 part? (sorry if my english bad)

[@GenieCrafts]

For texture addition you will need to do it in 3D missing software like Blender. Pepakura is a unfolding tool and it will show model as you built it in a 3D middling tool. Same goes for splitting the model into 2 parts. There is some basic capability in Pepakura to spilt faces into or more parts but that’s not very advanced

[@viptech3491]

Why can't you upload a start to end design development of Car most awaited TATA Altroz

[@GenieCrafts]

I didn’t understand what u r asking for. Can you please clarify. Also I m not a 3D designer

[@viptech3491]

@@GenieCrafts Altroz car Design in blender , export in pepakura designer make in papercraft. That will be great you are a excellent teacher .I hope you are capable for this

[@GenieCrafts]

@@viptech3491 I know very basic blender... I can try or May be when I am capable to design, I will upload video 😊

[@viptech3491]

@@GenieCrafts u can bro

[@nelig_]

Can you pay for lifetime pepakura with euros? Or like can it automatically convert euros to usd? Btw thank you for all the tutorials! :D

[@GenieCrafts]

I think your bank will automatically convert it into euros during transaction. Happened the same with me, it converted it I to equivalent local currency. And welcome 😊

[@nelig_]

@@GenieCrafts awesome! Thank you! 😄

[@GenieCrafts]

Welcome 😊

[@mastersaikat]

Do you have the product key of this version????

[@GenieCrafts]

Sorry. One product key can only be used once. You may want to purchase one for yourself. It’s for lifetime

[@thanoscy]

Nice. Thank you for the flip-no flip option...

[@GenieCrafts]

Welcome 😊.

[@MrMike6519]

Well Done! Cheers Mate!

[@GenieCrafts]

Thanks a lot mate ☺️

[@jayparmar7603]

First 🔥😅

[@GenieCrafts]

Thanks buddy... I hope your query on digital textured print out was answered... 😊

[@jayparmar7603]

@@GenieCrafts I have exams running now , but still don't miss your video , happy to see you growing persistently

[@GenieCrafts]

Thanks again... people like you keep me motivated to post new things continuously