GENMITSU 3030 PROVer MAX Desktop CNC, 300x300x78mm working area, 300W spindle, cutting aluminum

Рет қаралды 30,766

Күн бұрын

Пікірлер: 78

@XxIcedecknightxX 4 күн бұрын

I just bought one and as a professional machinist/programmer I'm quite impressed with the machine's capabilities. Currently using Universal Gcode sender as my controller and Fusion 360 for modeling and programming. If you do get this for aluminum milling, the Makita router or 1.5kw spindle is pretty much mandatory. Also, it's best to watch a few machining videos on speeds/feeds and most importantly Highspeed toolpath programming. These machines can only take light cuts but you can still go fast.

@triskalguilo 8 ай бұрын

Yet another end-to-end solid review! Can't say it enough: I love your matter-of-fact, straight-to-the-point, no-BS-just-good-content style 👍

@8bits955 8 ай бұрын

i been running this machine for a while, overall an excellent well built machine with a decent price tag, however the biggest downside is the weak 300w spindle. For wood they are absoletly fine but for a machine that is this ridge and advertised to cut soft metals it need something alot more. I personally upgraded the spindle to a 1.5kw spindle now can run metal jobs like it nothing even can cut titanium plates at okay ish speed. and it give me the opportunity to run 10mm end mills too with an er16 collet. Overall very happy with the machine very well build just wish it give you an option to buy a better spindle out of the box rather than wasting money on the 300w spindle

@ElPossum-r6t 8 ай бұрын

Hey I have the same machine what spindle did you upgrade to?

@8bits955 8 ай бұрын

@@ElPossum-r6t i upgraded to a gpenny 1.5kw vfd spindle that come with a er16 collet rather than er11. It aircooled but they do have a water cooled version aswell i jsut cant be bother to setup the water cooling bit so went with air cool. Overall very happy with it can machine metal properly at decent speed

@bumbeeworking7587 8 ай бұрын

Thank you for the best Review of the PROVer3030 i have seen.😍

@Techno4more 8 ай бұрын

you wont believe how clutch this is. i just got mine in and set it up but dont have much of an idea of how to use it. im sure this will be helpful. you really helped me how to use my 3d printer.

@KrisRyanStallard 2 ай бұрын

Wait a minute... is your name Gretchen? Did you rebrand fetch and make it happen? 🤣 (Christ am I old)

@BrickEngines 4 ай бұрын

big W for aurora tech, your review is incredibly detailed . Most don't cover to this extent!

@kieren7763 7 ай бұрын

I just found your channel and you do a great job of reviewing machines clear ,honest and straight to the point and very knowledgeable

@KrisRyanStallard 2 ай бұрын

This was an amazing review! Professional, thorough, and to the point. Your presenting style reminds me of Chris from Explaining Computers (another presenter I very much respect).

@dancevideo2 22 күн бұрын

Very well done review! I see the surface finish on aluminum is much improved using the Makita router, vs the stock 300W spindle. Given such a difference, it would be nice if they offered the option to buy the 3030 without the stock spindle motor- although I suppose there's more hassle to offer different configurations and little upside to them.

@dailyprofitcenter 8 ай бұрын

I never knew I needed something like this...but here we are.

@dougparadis 7 ай бұрын

I would really like to see a review of the Genmitsu 710W trim router with ER11 chuck vs. the Makita router on this machine.

@elliot3147 8 ай бұрын

Pro tip, you can use hot glue to help secure some of your materials down. Then use ipa to release it.

@imowgrass 7 ай бұрын

Always knew that nasty beer had a second use. Kidding, but not really.

@KrisRyanStallard 2 ай бұрын

When I was in vocational school to become a machinist my instructor also suggested keeping some good quality double sided tape handy. Just slow things down a little bit and you would be surprised at how well it works for tiny parts.

@Duckferd 8 ай бұрын

It will probably take an extraordinary amount of time to do this but... are you guys planning on putting together a Milo V1.5? I'd be curious how a DIY bridgeport CNC mill compares to these kit gantry CNCs.

@Shorrey 6 ай бұрын

Thanks! It gives a good idea of the machine's capability.

@Omri_Makes 8 ай бұрын

I've learned so much from your tech channel, thanks for your in depth reviews ☺👍🏻

@axelSixtySix 8 ай бұрын

Hey there, with the Makita running at 4.5 the RPM is 25.000, so you roughly double the speed with the same gCode. More power, double speed, of course the gCode makes it easy, but it only shows the obvious evidence. To be fair and allow people to see the real difference between the 300w spindle and the wood router, you should have double the feed and speed of the gCode for the Makita (or divided by two the feed and speed of the Spindle's gCode or set the speed of the Makita to position 2) making parameters somehow equivalent. For your information, the optimal parameters for your 1/8"carbide bit in 6061 amuminium should be something like: _ 0.2in (5mm) depth of cut, so the bit should allow you to cut into you 0.125in (3.125mm) plate in one easy pass considering the 1.5hp of the router. _ 6370 RPM (Makita's speed 1 is 10.000rpm, not suitable for cutting aluminium) _ 15.3in.mn (388mm.mn) - BUT should be raised with the Makita to 23in.mn (610mm.mn) because of the 10.000 RPM. Can the machine stands it ? If yes, what about the cut quality ?

@tonyprice8108 6 ай бұрын

Great informative review. One thing I think that you may not have thought of during the spindle testing. In the 300watt spindle you used a 1/8” end mill with a 1/8” shank. When using the Makita router motor you used a 1/8 end mill with a 1/4” shank providing a stiffer tool to begin with skewing the results somewhat. You should have used a the same 1/8 end mill with a 1/4” shank in bath spindles. The ER-11 spindle can accept a 1/4” ER-11 collet. I don’t think the 309watt spindle would have preformed as well as the more powerful Makita but do believe there would be a noticeable improvement in surface finish.

@royhi1809 8 ай бұрын

another great review. Thank you.

@gremlin60 8 ай бұрын

love the cnc videos. thank you

@joseluisvalenciacontreras6663 4 ай бұрын

Querida Aurora,cuál sería la mejor opción para adquirir una mini cnc mill con opción de quemado láser que sea asequible para iniciar a realizar prácticas,gracias por sus recomendaciones...su programa es fenomenal 👍

@elliot3147 8 ай бұрын

Nice video. I'm impressed by the improvements they made to this type of CNC.

@isaiahvargas5659 5 ай бұрын

Hello can you make a video on how to set the probe up. My 3030 stabed the probe

@TinkerTechRC 7 ай бұрын

i'm sold!!! gonna buy one of these.. THX!

@robmortimer1112 2 ай бұрын

Hi firstly thank you for you video. It really helped. But can I please ask did you experience any problems with the y axis not allowing the full working area of 300mm x 300mm being directly over the bed .... mine runs some 15mm short of the back of the bed . This obviously hangs over the front of the bed. So when working at a full 300 x 300 it is causes problems ..... do you know if anyone else has reported this and is there a fix for it ?

@decameronification 6 ай бұрын

Thankyou very helpful in my decision to buy one.

@patrickmckowen2999 7 ай бұрын

Great review as usual 👍

@WMH-3D-Printshop 8 ай бұрын

good videos as always. a small thing regarding operation and execution of milling of workpiece. using air assist or adding liquid (alcohol) when milling helps. another thing is when you have to mill, you use a scrubber mill for all the rough and finish milling at the end with a slower feed and you mill clockwise as white as possible so the endmill has to do the job. another thing I saw was when you milled in wood that it does not move in the same constant movement around the object but constantly changes speed, can it be selected differently or is it in the software. ????

@fitybux4664 7 ай бұрын

Time to invest in a dust shoe and a shop vac to get rid of all those crumbs before they fly everywhere. 😀 They make one that fits this 3030 perfectly.

@YuanhaoWang-h9e 5 ай бұрын

How would you compare it with Carvera Air? Thanks

@hariharaputhranmadabhushir4712 2 ай бұрын

Hi Can it cut 2mm stainless steel?

@overcheats4518 6 ай бұрын

any chance you can make a video of it cutting into stronger steel ? maybe with another spinder and if possible in combination with the rotary axis 🙏

@Big_Boulders 8 ай бұрын

Nice video. Here's a few tips. You would get better results if the materials are mounted directly on to a solid surface. This will result in less chatter. Next time try the same cuts with a single flute up cut bit and set the milling to a convenientional cut.

@ishakmagnus9731 2 ай бұрын

Do we need any special software?

@Vision-xf8gl 8 ай бұрын

It could also be the 300w spindle with the collet has too much runout under load, Makita router is probably much better built to handle sideloading. My cheap machine with a similar 500w motor could not do profiling cuts at 0.3mm DOC in aluminium when I got it, now it can do 1-2mm easily as its only driving a separate spindle through a belt drive, same or less power but a more rigid spindle. It even handles milling steel now to a point.

@hakowy 6 ай бұрын

if i plan to work with brass on this machine, i dont understand how the makita router will be more precise than standard spindle?

@teabagNBG Ай бұрын

i cant decide if i should get a genmitsu 3030prover max or a anolex 4030 evo pro... are they ane other alternatives?

@fitybux4664 7 ай бұрын

15:30 I think you've just sold anyone watching this on buying a Makita Router. 😆

@andraniksargsyan5590 8 ай бұрын

Hello! Tell me please! full PETG printing settings.On the Advenchurer 5M Pro printer

@HiroGamez 8 ай бұрын

YEEEEE! Thank you for the review

@ulamss5 8 ай бұрын

This side of the industry sorely needs someone like Bambu to just come in and do a lot of common sense things and more. This pace of yearly improvements is embarrassing.

@TonyGrant. 8 ай бұрын

Excellent review, as usual. I particularly appreciated you recent review on the Sovol SV08. Will you be doing one on the Peopoly Magneto X?

@AuroraTech 8 ай бұрын

I don't have any plans for that machine yet as my review schedule is fully booked until September, but let's see.

@TonyGrant. 8 ай бұрын

@@AuroraTech Ahh, that's a pity. I am interested in what you would make of it's linear motors and it's 3 micron X-Y accuracy. However, I look forward to what you show us between now and then. Many thanks!

@PilotEricG 6 ай бұрын

What are some good programs I could use? (For beginners)

@Techno4more 8 ай бұрын

so, im confused. how do i take a g code from a software, and tell the machine where to start, using the offline controller? and , is the offline controller capable of doing multiple finishes with different bits?

@TheOneOriginalJackal 8 ай бұрын

I watch to hear her say "today....."

@warmfreeze 8 ай бұрын

its "Tuhday"

@TheOneOriginalJackal 8 ай бұрын

@@warmfreeze 😆

@HyperMakes 8 ай бұрын

Same, i enjoy the intro more than the actual full reviews...😂

@divyajnana 8 ай бұрын

Another great review by Aurora Tech. You did not mention the RPM of the Makita router, do you know what it was? Thanks again.

@AuroraTech 8 ай бұрын

1=10,000 2=12,000 3=17,000 4=22,000 5=27,000 6=30,000 So, I guess 4.5 is something around 25k. Some users actually measured it: discuss.inventables.com/t/makita-rt0700c-variable-speed-chart/30922/2

@DavZell 8 ай бұрын

There is a V2 of this out. It has a number of improvements.

@zakariakhamees 8 ай бұрын

Great review. In my opinion, these desktop CNC machines will never become mills unless their frame is made with steel instead of aluminum extrusions. I would call them soft metal engravers at most but not milling machines. The good thing is that they are not advertised as mills but i just wanted to clarify that.

@Ryxxi_makes 8 ай бұрын

how would one upgrade the motor to nema 23 with an adapter plate ? how to change stepper current ?

@Vision-xf8gl 8 ай бұрын

The drivers for the steppers probably would not support the current for the bigger motors, so you would have to change those too. If they are integrated or it doesnt have outputs for signals for an external driver you might have to buy new drivers or a controller too

@IronJmo 8 ай бұрын

Can this plug directly into a PC and run with Candle? Or is the offline controller the only option?

@AuroraTech 8 ай бұрын

Yes, you can connect it to your company to use candle or ugs if you prefer.

@IronJmo 8 ай бұрын

@@AuroraTech Thank you for taking the time to respond! I'm thinking of buying one.

@pacificcoastminiatures 8 ай бұрын

Great review as always. Sad though to see no shipping to Canada. 😥

@pacificcoastminiatures 8 ай бұрын

Looks like Amazon Canada has it. 😊

@JAYTHEGREAT355 8 ай бұрын

Great review.

@sgt.sasquatch 8 ай бұрын

i notice aurora growing faster ....she's getting much cuter day after day 😍 ALSO the quality of the videos and reviews getting more and more better 😍🥰 so proud of u 🥰🥰🥰🥰🥰🥰