Genright Tracer build by Bruiser Conversions.

Genright Tracer built by Bruiser with LS swap. Currie Rock Jock 60 and 70 axles, 40 inch Mickie Thompson Baja Pro tires, Hutchinson bead locks, Genright aluminum armor, genright LJ roll cage, Genright Aluminum fenders, bumpers, and control arms, aFE headers and Magnaflow mufflers. Motor is an LH8 paired to a 4L65e with an Atlas transfer case. PSC hydro assist steering. Recently added, KC lights, Rugged Radios race radio and intercom, Rigid Lights chase bar, Garmin wireless switch and overlander. Hammers proven on the OG13 course • The Real Hammers Exper...

[@WilliamVG]

Jeep looks immaculate. Thanks for the motivation.

[@thelaw300]

The LJ and GT350 make a sweet pair!

[@thrashmetal7588]

Tell me you’re rich without telling me you’re rich!

[@criscoxcris_190_malnur6]

I'm poor compared to a lot of people.

[@scottpetrie8707]

Bullshit. Dude got the house, mustang, truck,house and didn’t touch a bolt on the jeep. Let’s keep this real.

[@VLEEZY1]

Wisdom Knowledge and Good Connections Can Help Out A lot

[@Georgia4Low]

no expense spared! beautiful just beautiful

[@criscoxcris_190_malnur6]

Thank you!

[@densioful]

What an awesome build.

[@shucks_sesd_6195]

Beautiful rig

[@HotRodDave]

Nice Jeep!

[@forgottenknowledge8917]

5:01 hello mate

[@Glenb13]

Very nice build! Wish my TJ was an LJ. Cool cold air set up, Never seen it done that way before. And that radiator. Surprised you could fit a dual fan set up in any jeep wrangler! Lol. Cant wait to see more on the GT350! Hope to have one in my driveway one day.

[@criscoxcris_190_malnur6]

Thanks Glen. I blew the motor on my GT350 running too much boost. Got a forged and sleeved racing engine being built right now. Will definitely put some video together when it’s finished.

[@Glenb13]

@Owen Amos google jeep TJ6. Guys have been doing this mod like over 10 years ago lol. But they put a ton more work into it to make them look closer to factory. I have been waiting to see Genrights kits. Now that it is out. Waiting to see the cost lol. Either way, its a mod that I keep thinking of and Genright is making the parts to make it easier.

[@criscoxcris_190_malnur6]

Glen, Just FYI, Genright just came out with a TJ to LJ conversion kit.

[@Glenb13]

@@criscoxcris_190_malnur6 Oh yeah, it has been on their site for a few weeks but no prices. This kit is no where as complete as guys been doing for a fraction of what it may cost. But twice the work cause they sleeve the frame and everything like the ol Discontinued Bruiser TJ truck conversions. Some look almost factory.

[@anthonygendron9737]

WOW

[@norcal2A]

Badass

[@beaumont9072]

Sweet jeep. America 🇺🇸💪🏼🔧🔩🤙🏼

[@sonicshima1663]

Sweet rides! Keep up the cool videos

[@danapino-dempsey2148]

Damn nice toys sir! Like your style!😎👌

[@tho464]

FLEX!!! But beautiful.

[@rhyswilliams695]

Nice toy collection!

[@choicemojave6655]

❤

[@mikehoffman3690]

Amazing build.

[@criscoxcris_190_malnur6]

Thanks!

[@WilC379]

That steering wheel looks out of place lol. Send it to carbontastic and get one that matches that sweet build!

[@jaredjubran7294]

I think this jeep is in Jacksonville now i see it sometimes!

[@criscoxcris_190_malnur6]

Jared, Yep! You are correct, Sir. I live in Fernandina Beach, Fl. I get down to Jacksonville frequently.

[@jaredjubran7294]

@@criscoxcris_190_malnur6 thats awesome we’ll have to wheel sometime!!

[@gregjmagee]

Hey cool build. I’m doing one almost identical right now. Will have an LS4 and 4L80e with an atlas. Are those the 40” Baja pro or 43?

[@criscoxcris_190_malnur6]

These are 40's.

[@sergei041188]

👍👍👍

[@bryanmcconnell3435]

Do you know how much your Jeep weighs

[@criscoxcris_190_malnur6]

Not yet, but will weigh it soon.

[@criscoxcris_190_malnur6]

Just had it weighed with a full tank of gas. Sitting at 5100 lbs.

[@travisxxx23]

Very nice! Do you have the 4 speed or the 2 speed atlas? Trying to see which one will fit in my Jeep.

[@criscoxcris_190_malnur6]

I have the 4 speed

[@fredeschen3783]

So... how much?

[@WilC379]

Probably close to $100k with labor.

[@criscoxcris_190_malnur6]

@@WilC379 140

[@fredeschen3783]

@@WilC379 worth it! 👍and actually people spend that much on a new Jeep and accessories and don’t get anything that awesome.

[@WilC379]

@@fredeschen3783 That's true, but most of the people I know with newer Jeeps have young teens so they need the 4-doors and full back seat. There's also a few in my club with JKU's on tons and 40's, long arms w/ coilovers, Hemi swapped, etc. that are pretty awesome as well!

[@Ikillintel1]

It’s a cool build but it’s not a Jeep anymore… it’s a buggy. As you stated the only original pieces are the tub and dash. Still cool asf but it’s not a Jeep.

[@jeromeburrasca6710]

How much ? Why a 116” wheelbase?

[@criscoxcris_190_malnur6]

Just talking to the guys at Genright, that wheel base has won several Ultra4 racing championships and they believe it to be an optimal option so I went with it. Think is 115.....

[@jeromeburrasca6710]

Cris Cox Interesting, That’s the same as a LS V8 based Chevy Tahoe. The new Bronco, Raptor and Tacoma’s are all running IFS up front now too.

[@changedman...3148]

Very nice would of liked to hear it?

[@criscoxcris_190_malnur6]

Just uploaded a video here where you can hear it pretty good going back up the other side of the hill. kzbin.info/www/bejne/a5PHnYdvdsuIfKM

[@Bullfighter6262]

Can you give is the cost of all this just so we know what we expect to pay for the tracer build and then the total cost of the Bruiser conversion. Thanks.

[@josejoya4520]

No one ever gives you the costs I've noticed.

[@treybob1000]

Mark, you can figure it to be somewhere north of $100k, depending on how many bells and whistles you add… I’ve seen them go all way to $150k

[@criscoxcris_190_malnur6]

I just added up all the invoices and I have $140k in her including the $10,600 I paid for the Rubicon LJ. A lot of extra work was done under sponsorship from Bruiser thats not in the price.

[@frankcastle9691]

For the money you put in that you could have just bought a rock bouncer.

[@criscoxcris_190_malnur6]

Probably could have bought two but also wanted a street legal daily driver.

[@criscoxcris_190_malnur6]

Hammers Proven! kzbin.info/aero/PLk_OGxLSyN_mrRGcvbKAEIRA3fkyXGXEE

[@pricetag30]

Sound expensive!

[@claraarmijo9002]

Hey Cris how can I talk to you?? Thanks Tony

[@criscoxcris_190_malnur6]

Reach out to me on Insta @Cris_190_malnur

[@dhrracer]

What do you do for a living?

[@criscoxcris_190_malnur6]

I'm a retired Marine Corps Communications Officer and now sell software to the US Military, but real estate investments paid for this build.

[@casey197930]

Takes all the fun out of hearing about builds when I hear someone else built everything. Hopefully someone else can fix it for you if you break something out on the trail. Cool rig though.

[@criscoxcris_190_malnur6]

Bro I’m a retired Marine that sells software for a living. I don’t have the skills or tools to build a rig like this 😂. I’ll gladly pay the experts to do what they do best.

[@beaumont9072]

How much $$$ you got into it?

[@phillyb4588]

Tracer is 150000

[@hotrod76.]

How that aluminum last on the rocks.?

[@criscoxcris_190_malnur6]

I debated that for a while. Always ran steel. But the guys at Genright attested to the strength of the tubing and I figured I'd give it a try since a major goal of this build was weight reduction where possible.

[@hotrod76.]

@@criscoxcris_190_malnur6 you take it out and wheel it or just show it at jeep shows?

[@criscoxcris_190_malnur6]

Built it for wheeling and hopefully one day some Ultra 4 4400 class racing. Just uploaded a video from Moab here: kzbin.info/www/bejne/a5PHnYdvdsuIfKM

[@robspading740]

There are loads of guys running this stuff all over the hardest rock crawling trails. Genright is top notch and tough.

[@criscoxcris_190_malnur6]

Quick update. I just did a gnarly race at The Hammers and the aluminum was no problems at all.

[@TheRedStateBlue]

congrats on being rich, i guess. is that what this is? "look, everyone! i have $150k to dump into an off road rig. see how awesome i am?"

[@johnjohnson9431]

he didn’t steal the money, he earned his money and has the right to do what he pleases with it. You’re a bum.

[@TheRedStateBlue]

@@johnjohnson9431 how do you know he didn't steal his money? you his boyfriend or something?

[@360VRStudios]

An offroad toy that will not touch dirt!...shame.....

[@criscoxcris_190_malnur6]

Why would you assume that? Already banged her up at Moab and Sand Hollow.