This video was so helpful it even helped me with my Mercedes, thermostat was replaced by the dealer and I could swore they didn't bleed the system.There is no videos on KZbin of Mercedes like this one of yours..Thanks man
@GeorgeAusters Жыл бұрын
Glad to help man!
@tomg4793 Жыл бұрын
Did you do the same exact process on your Merc (PS: What model Mercedes do you have?).
@lindabenton14364 жыл бұрын
That is one cool and stealthy volt meter, I like.
@jessewainwright12 жыл бұрын
My 2014 535i overheated and derated on the interstate. I pulled over and found it was low on coolant (I hadn't checked it in 9 or so months). After I filled it, it continued to slowly overheat but then return to normal operating temperature, over and over again (I monitored the temperature via the hidden menu) . Once I got home I was able to bleed the system and top it up thanks to this/your video! Crisis averted >.
@tandomehlo52917 ай бұрын
Just followed your steps and I must say, it worked perfectly. Thank you very much!!!
@GeorgeAusters7 ай бұрын
You’re welcome!
@TheThinkerBodyMindSpirit8 ай бұрын
May I know what is the purpose of this? Cause i have a bmw fault 'aux water pump' bmw e90 318i Lci 2010, I hope you reply
@eduardsutac45344 ай бұрын
Hi guys, i have an BMW M235i N55 , i was at mecanic because it was overheating, he changed the cap on the expansion tank, now the car doesn't lose power anymore, but the water temperature is around 107-110°C and the oil 116-119°, now it's also very hot 37°C outside but i was also driving during a cold day 19°C, the oil and water temperatures were the same. I asked the mechanic if it is okay to be so high and he said it is 4:39 okay... I wanted to ask here too because I can hear some light noises from the expansion tank. Is it okay to be at these temperatures? Thank you in advance!
@tayoni80011 ай бұрын
What can happen if the auxiliary tank coolant level sensor fails?
@nicopano18 күн бұрын
Hello Sir, what if the stream of coolant is thin? does it mean there is a problem with the waterpump?
@darrellrobinson94684 жыл бұрын
Another belter mate and not even had to pay for views 😂
@GeorgeAusters4 жыл бұрын
Cheers mate
@jchalmers28jc18 Жыл бұрын
Hi mate your last video helped me out about the hidden menu and coolant display . My fans no kicking in even at 100c only way to keep car under 100c. 94c is blasting the heaters full blast but getting to hot for that now am cooking lol any idears thanks
@nikmohdrostamniksoh4457Күн бұрын
The same method for e90 320d(n47c)?
@Lionsy3024 ай бұрын
Is it must my car coold or it ok if i did it and its warm and must i open the lock?
@NextLevelAutoDiagnosticsLLC2 жыл бұрын
Do you have a link to where you got the 12V usb voltmeter
@guppylove72003 жыл бұрын
Will this method work on a mini cooper S
@gladwellkhanyanetsela6893 Жыл бұрын
Hi,I've just changed the water pump,but it is not working as you've just shown in the video there.all it does it pumps stops pumps stops and with not that presure
@J.R.TheRealtor2 жыл бұрын
If my bmw 335i is no longer bleeding. (Electric water pump), is it my water pump that is bad then?
@HXNXH-mw3ouАй бұрын
Should this be done after topping up coolant? My coolant is running low on my E88 118i N43 engine and I’ll need to refill. Would this be the next step?
@GeorgeAustersАй бұрын
No need really just to top up, but you should find out why you're losing coolant first
@stevesas6328 ай бұрын
Cap open on this one, no mention if bleed screw, others different. Just saying, why so many different versions of this procedure?
@545iAR3 жыл бұрын
Good video. You need to have your headlights on. Don’t think you mentioned it on the video but you can see the light switch is to the dipped headlight position,
@stoicadaniel19092 жыл бұрын
hello and all the best for you. i have an issue, my 320i e91 2007 keep coolant temp at 79-82°. its not bleeding right or thermostat is dead !? thanks.
@kevinkayando32032 ай бұрын
can bleeding happen when the cap is fully closed?
@pgtips78182 жыл бұрын
Hi George is it the same procedure on N47 engine?
@tomthompson74003 жыл бұрын
well done , clear and easy to follow.
@Arisaulia.h2 жыл бұрын
Any other way to bleed the coolant? Because my left climate control knob is broken i can't the temp the other side is okay. Any idea?
@thekop9049 Жыл бұрын
Can i do this with engine is running. I don't want to ruin the battery ( not able to connect a battery charger as well)
@GeorgeAusters Жыл бұрын
Just drive the car first, it won’t kill your battery running the water pump for 10 mins
@thekop9049 Жыл бұрын
Just leave the cap open and follow your step right, thank you so much for your reply
@ScottT-f7f4 ай бұрын
What if I started the car during the bleed process? I did not now my water pump isn't working. Could I have blown a fuse or sorted a circuit
@GeorgeAusters4 ай бұрын
It’s fine don’t worry
@Akac3sh2 жыл бұрын
Would I just leave everything closed if I want to start running coolant through the system before starting the engine? Had a severe coolant leak and engine over heated I waited 2 days before starting it again it got so bad i couldn’t even start my car but I want to run some coolant through the hose and around so when she starts she won’t over heat again. If she starts again 🤦🏽♂️
@GeorgeAusters2 жыл бұрын
Watch this video again to see what I did👍🏻
@MrJente4 жыл бұрын
Does it matter if you have an automatic for the pedal?
@raymondclutton66704 жыл бұрын
Hi I need to know a little more about idrive which isn't really covered by most people life span faults ect would be grateful love the n52 always follow great job
@Buckettboyz2 ай бұрын
Shit killed my battery I’m not sure if it’s fixed but I wanna do it again with the car on can I just leave the cap open with the car on
@jorgemartinbg2 жыл бұрын
I have a 2017 430i and I think my mechanic didn’t do this to the car . I still have the car asking for coolant after it’s hot. When I remove the cap halfway I hear a lot of air coming out. Is that normal? I did change a hose and he replaced another piece under the manifold to remove the part. Any ideas?
@kevinkayando32032 ай бұрын
@@jorgemartinbg bleeding wasn't done water pump likely kaput. bleeding saves alot of unnecessary costs
@greghughes6718 Жыл бұрын
Do you leave the cap off the coolant bottle (header bottle) while bleeding for 10-15 minutes,after holding the gas pedal down for 10 to 15 seconds and opening it to check electric water pump is running as shown in the video. Very nice video
@andreyzozulya1181 Жыл бұрын
Hello George!Maybe you know what about N45B16 engine.This is engine have an electric water pump ?
@johnjones6073 жыл бұрын
Done this about 10 times so far and can still hear air in the system, no heat from heaters. As the water pump is cycling the water doing the bleed i can hear crackling/air by the oil filter. Cant find any leaks or anything and the car doesnt overheat, just no hor air out of the heater vents....which is getting pretty rough now its freezing cold in the UK.
@GeorgeAusters3 жыл бұрын
Have you seen my "Heater not blowing warm air" video?
@gail69042 жыл бұрын
also does the pump stay on and pump for the full 10 mins ?? mine doesnt stay on all the time..we previously bleeed it a few montsh ago after installing new water pump..i hope my pump isnt bad or does it stop pumping once air is all out?? hope u can answer
@GeorgeAusters2 жыл бұрын
It goes on and off
@ronparker64511 ай бұрын
How about the lower hose under the coolant tank
@alquehenwebb73492 жыл бұрын
Thanks for your advice keep up the good work bless
@BasitKhan-eo5rn4 жыл бұрын
hi, does this method work for 4 cyl engines with electric water pumps like the n43 318i? thanks
@GeorgeAusters4 жыл бұрын
Sure does👍🏻
@BasitKhan-eo5rn4 жыл бұрын
@@GeorgeAusters thanks!
@gabrielguerrero8228 Жыл бұрын
Do you leave the reservoir cap open?
@GeorgeAusters Жыл бұрын
Always best to
@stunicholson39214 жыл бұрын
Thanks george, just boght an F30, 335i with N55. Gooking forward to getting things done!!
@GeorgeAusters4 жыл бұрын
Good stuff bet that’s fun to drive! 😁
@Rocky-y8f8q28 күн бұрын
Awesome man ! Does the BMW 116i have an electric water pump? Cheers!
@GeorgeAusters28 күн бұрын
No
@gail69042 жыл бұрын
do u have to flush after topping up when u take off cap? when i tried to bleed without CAR RUNNING, my headlites stayed on and ran my battery down? how u turn headlights off???
@GeorgeAusters2 жыл бұрын
Just turn the headlights to the off position lol
@gail69042 жыл бұрын
@@GeorgeAusters i had them off but they still came on ..i didnt start the car as i was bleeding the system..weird..when i shut the start button off and pulled key out, they went off..
@abumannocchi76362 жыл бұрын
Same thing battery died on mine make sure charger on battery.
@gail69042 жыл бұрын
@@GeorgeAusters i had the daylight running headlights on..saw a video on here how to shut them off..that is whay my battery died
@abumannocchi76362 жыл бұрын
@@gail6904 pull out light switch on left .you can push it in and pull it out try that
@THE1AE0N2 жыл бұрын
Did this but i can't hear the electric water pump turning over. And the car still over heats anymore tips ??
@GeorgeAusters2 жыл бұрын
Water pump and thermostat needs replacing
@andrewminion31382 жыл бұрын
Should the pump stop at all during this process as ours stops and restarts now and again ?
@GeorgeAusters2 жыл бұрын
Yes that's normal
@rturini4 жыл бұрын
How many litres of coolant does that engine fit?
@GeorgeAusters4 жыл бұрын
Around 8-9 Litres
@zzhughesd2 жыл бұрын
Bleed with cap on or off. Expansion cap. ? Thanks
@DefyDistrict2 жыл бұрын
Why would you like the comment but not answer the question you twát
@viscalyske16244 жыл бұрын
Handy video as usual
@GeorgeAusters4 жыл бұрын
Thanks brother 👌🏼
@river_634 жыл бұрын
Thanks for the VD. For me, there is no bleeding when i try to do this like U. N47 E90 LCI 320d. I don’t know something wrong.
@GeorgeAusters4 жыл бұрын
N47 does not have an electric waterpump
@river_634 жыл бұрын
@@GeorgeAusters thanks
@dmach56473 жыл бұрын
@@GeorgeAusters Do all N47 engines use mechanical water pumps? I have a 2012 F20 116d I thought it was electric but now I'm not so sure lol
@tonybelmonte17242 жыл бұрын
It's making noise. Do I just stop after 15 minutes or is there a sign that I should look for that let's me know it finished?
@hammerfm2 жыл бұрын
@@GeorgeAusters So how do you bleed N47? Just start engine, open cap and let it idle for 15 min?
@velocitydrift12144 жыл бұрын
What a diamond geeza you are fella
@GeorgeAusters4 жыл бұрын
Cheers Marc!
@antjohnson4236 Жыл бұрын
If this doesn't solve the issue with cold air one side hot the other, is it a case of try it a couple of times or do I move onto trying another issue?
@GeorgeAusters Жыл бұрын
Have you done a flush yet?
@antjohnson4236 Жыл бұрын
@@GeorgeAusters what's a flush?
@Fezzythaking34 жыл бұрын
Will it make it go faster ....
@Armageddon-qo4wy3 жыл бұрын
N46 aswell?
@Edwin-km4xk2 жыл бұрын
Hey. There’s a screw on the coolant tank. Am I supposed to unscrew it during the procedure? Thanks
@irek123712 жыл бұрын
does damage to this pump cause no heating in the car?
@GeorgeAusters2 жыл бұрын
Possibly yes!
@bhdan8560 Жыл бұрын
Thanks mate. Good video
@PLuKE062 жыл бұрын
Would this work on the F30 N57 engine also?
@GeorgeAusters2 жыл бұрын
No
@sandromaz50022 жыл бұрын
Hi George I’m having a issue with my engine n53b30 325i, coolant overheating and going over the 90degrees celcius, a local garage diagnosed the issue and said it was the water pump which I changed today and I followed the procedure of bleeding it and getting the air out of the system but it’s still doing the same thing overheating and going over the 90degrees celcius. Any tips on what else I can check to see what’s causing this issue? pls try get back to me mate, cheers
@GeorgeAusters2 жыл бұрын
What do you mean going over the 90 degrees? You do know these engines run at different temperatures right?
@sandromaz50022 жыл бұрын
@@GeorgeAusters nah I don’t think their suppose to be running that hot tho?
@sandromaz50022 жыл бұрын
Definitely shouldn’t be going over at least 110 degrees
@atlshooter09 Жыл бұрын
Thanks- Big Help! 2011 328i
@erenoglu3 жыл бұрын
I have do this. But than im driving for 40 km highway . When im back i open the tank and still water bleeding into the tank. Whats wrong.
@MegaPyky3 жыл бұрын
How did you turn off please let me know
@erenoglu3 жыл бұрын
@@MegaPyky They told me its normal. And i do the bleeding again
@kevingonzalez35193 жыл бұрын
Can I use a running car
@abumannocchi76362 жыл бұрын
To keep your car battery good yes i usually use another Benz make sure enough gas tho and add extra oil.
@najathugail2 ай бұрын
thank you
@stunicholson39214 жыл бұрын
This the n55 as well?
@GeorgeAusters4 жыл бұрын
Yes👍🏻
@Data46644 жыл бұрын
This will work for N46B20 egine? (BMW 1 series 118i 06 modell) very nice video;)
@GeorgeAusters4 жыл бұрын
If it has an electric waterpump (not belt driven)
@Data46644 жыл бұрын
@@GeorgeAusters I am not sure but if I remember corretly someone says yes it have but I have v-Belt. But anyways I think not so much air in the systemt now.
@obonnetfe11573 жыл бұрын
very usefull for me ! Thanks guy
@dimitric360711 ай бұрын
This was so helpful man thank you! I’m doing this job this weekend. One question: do you bleed it with the cap on or off of the coolant reservoir? Or does it not matter?
@GeorgeAusters11 ай бұрын
Best to bleed with cap off
@maniaco55413 жыл бұрын
Thank you so much! that really helped me alot to be honest! much recommended guide for sure!
@maniaco55413 жыл бұрын
Btw do you know where i can check the tempteture while driving ? I have an bmw 335i e92 N54. Appricate it man!
@LxkknTV2 жыл бұрын
Hey I replaced my radiator and everything is good no leaks but I still have my light on for the coolant should I re bleed it ? And also don’t you have to turn the bleed screw when bleeding the system ?
@GeorgeAusters2 жыл бұрын
If light is on then your coolant is low, just add more until at max level
@LxkknTV2 жыл бұрын
@@GeorgeAusters it’s at its max level w the floating red thingy with coolant under could it be that the radiator has the wrong drain plug I have a automatic and its the manual one originally in it I didn’t think to check it and just replaced the radiator but could that be a reason for the light to be on?
@hosstheboss5020 Жыл бұрын
Great man Thanks
@ammaralnashed3 жыл бұрын
Nice vid geez 👍🏼
@GeorgeAusters3 жыл бұрын
Thanks man!
@Leo-wk7yw2 жыл бұрын
Great breakdown. Worked great on my N55
@GeorgeAusters2 жыл бұрын
Glad to hear!
@zacariasreal97803 жыл бұрын
Thanks for your information .
@GeorgeAusters3 жыл бұрын
👌🏼
@dre.supreme8 ай бұрын
Damn this video save my life!!!
@nossrc56383 жыл бұрын
I always do it with the engine on for 10 minutes and then close cap and no problem
@save2rave613 жыл бұрын
Same here. I run vehicle to temp. Fill. Then repeat.
@abumannocchi76362 жыл бұрын
Is the cap off or on
@abumannocchi76362 жыл бұрын
Start car take cap off put fan on one heat high ? Right that's what you do ?
@jonathanvazquez17312 жыл бұрын
It’s the same for a bmw 328i 2008
@saay.exotic3x1863 жыл бұрын
What to do if your pump don’t cut on
@abumannocchi76362 жыл бұрын
Check black box with 30 30 20 30 30 fuse passenger side check those if pump not on I removed mine before doing this test coolant pushed right out .
@jaworshkielllerbe39812 жыл бұрын
Good Job
@peterhogan22273 жыл бұрын
Hi George, good work great channel. Any recommendations for replacing the water pump on my E93 N53 engine? There seems to be a lot of choice, I guess most of the cheap ones will be Chinese? Is Pierberg a good bet?
@GeorgeAusters3 жыл бұрын
Pierberg is OEM... I'll be doing mine soon!
@peterhogan22273 жыл бұрын
@@GeorgeAusters Thanks George.
@cultistpriest18723 жыл бұрын
Going to change my Radiator will do this after im done thanks
@GeorgeAusters3 жыл бұрын
Good luck!
@kajusbaksys5708 Жыл бұрын
doesnt work i have n46 2007 e90 320i
@girmawihabte30152 жыл бұрын
It is high level bro tnx
@TellyDan10 ай бұрын
I thought this was Carl Froch for a mo🤔
@save2rave613 жыл бұрын
Mate you have a bleeder screw.
@Al3czek6 ай бұрын
Why cant we just do it on running engine
@killed_phill796 Жыл бұрын
Why do you have a screwdriver on it in the thumbnail just wondering?
@Chris23x36 күн бұрын
How come you didn't use the bleeding screw you didn't undo this bleeding screw 🤔😒
@Chris23x34 ай бұрын
That's not how it works on the 06 330i manual 6 speed
@GeorgeAusters4 ай бұрын
It is
@Chris23x34 ай бұрын
@@GeorgeAusters you have to start the car, idle, turn the heater up to 84°first fan setting the lowest setting.
@kingcrumpet Жыл бұрын
My water pump won't start. Maybe it's kaput
@Li8eralsarescum69 Жыл бұрын
Did you figure out the problem? Just replaced my water pump, but it still won’t turn on when I try the bleeding procedure
@kingcrumpet Жыл бұрын
@@Li8eralsarescum69 I replaced my water pump which worked for me. Have you tried checking the fuses in the white electrical box under the bonnet?
@Li8eralsarescum69 Жыл бұрын
@@kingcrumpet yep just did that today. Fixed it immediately. Holding temp just fine now. Thanks 👍🏻
@kingcrumpet Жыл бұрын
@@Li8eralsarescum69 good to hear 👍
@petergalan694510 ай бұрын
blleding coolant in bmw
@beemers72424 жыл бұрын
👌👍
@DanielleAusters4 жыл бұрын
👍🏼
@GeorgeAusters4 жыл бұрын
🙌🏼
@ronalbreit51234 жыл бұрын
Nobody knows the n52 like you do
@GeorgeAusters4 жыл бұрын
Still so many more videos to come!
@velocitydrift12144 жыл бұрын
Better than bmw doctor imo
@baxdiyarcafazov61643 жыл бұрын
👍
@isaacahmed9546 Жыл бұрын
Peace
@jaworshkielllerbe39812 жыл бұрын
⭐⭐⭐⭐⭐⭐⭐⭐ ✌️ ⭐⭐⭐⭐⭐⭐
@jf80858 ай бұрын
Goonsquad made more money than you PEACE! 😂
@raminyaqoobi44872 жыл бұрын
Thank you It was very helpful
@GeorgeAusters2 жыл бұрын
Glad to help!
@gabebeeson5254 Жыл бұрын
I need help, do I do this after I fill my resevoir up with coolant or fill up my resevoir after the bleeding procedure???????