BALER UPGRADE! BRAND NEW MCHALE 5600 - TAMACYCLE NETWRAP MAKING SILAGE!

Silage has started and the crops are looking well. The Lely has gone, replaced by a Mchale 5600. We also look at how TamaCycle Edge to edge netwrap copes with the dense bales.

[@bobpaterson1845]

Mchale certainly seems able to eat the grass at a fair speec 💪 good video George 👍

[@roba4297]

Nice one. I used to use a Claas string round baler, and to get a square cornered bale, it required driving weaving left and right over the swath to avoid a barrel shaped bale.

[@PA-ek3ul]

Good too see someone who doesn't reverse back everytime a bale is finished👍

[@user-ld6ik5qm4m]

You don't have to reverse when you have a bale kicker. As it ensures that your bale clears the back of the machine

[@charleshart6992]

Nice piece of kit George, great video!

[@b2617]

Nice seeing some field work again

[@Dermot501]

Great video George📹🚜All the best with the new baler👍

[@gunton21]

Great video again george. 👌👍

[@user-ld6ik5qm4m]

I've used Farmhand, Massey, Vicon, New Holland and Welger over the years and found that the Welger roller balers were fantastic in silage. I didn't get round to trying out the Mchale before I retired from farming and contracting but they certainly are well made and popular machines.

[@sandymcghee3328]

Another great video George 👍👍👍👍

[@Rx37Legacy]

Great choice with the McHale! Looks good!

[@peterobey491]

A Good selection of New Holland tractors George, nice to see 👍

[@kierancl]

Best of luck with the new baler George!!! Congrats

[@gmartin8240]

Great baling George, the McHale is a great bit of kit . The Tama wrap is working well. Well done George 👍 🔧 🚜

[@thomassteadman6781]

wow cracking video George👍 that mchale looks fantastic baler

[@RaysFarming]

Hello George loving the new baler and the anvil issue was in straw last year she packs them well keep up the good work look forward to the next video 👍👍

[@patkelly7999]

Mighty stuff George, lovely baler, well wear👌👍🙏💯😎☘☘

[@kenjohnston1996]

Good video George hope mc hale look after you great advert for them 👍 from Ireland

[@michaelweatherhead9470]

Thanks for the video George nice bit of kit that 5600. Take care of yourself and family and friends and be Blessed ❤️❤️👍.

[@kevinwillis9126]

Thanks George excellent vid sir.... Take care..

[@user-rs2rh2dg4f]

Nice combo,the New Holland go well together 😊

[@Agriculturespotter]

Nice video George!

[@michaelstaunton1632]

Best of luck with the McHale baler hope it goes well now 🟩🟩 🇮🇪

[@fredharrowven1040]

Good evening George, Nice video and great to see you out there balding I love this time of year, You take care George and look after Dave.🚜🚜👍⭐️

[@SAB_Agri]

All the best with new baler..💪💪 O again “Why so many bales”😉😂😂 🤙🤙👍👍

[@laurencegibbs2753]

Top tip George, when round bailing and your running low on net, on the last bale if you catch it right you shut down the pto and tie the old roll to the new. Makes life easier!

[@terabyte1695]

Lovely Machine,we used to have a New holland Baler, but a good job done George ,hope the weather is kind to you.😇😇😇😇😇😇

[@michaellane9873]

A nice setup george.

[@svengranzow3702]

Hallo george Nice Film from making round bales. The mc hale press is build for gras bales. All good harvest with the mc hale

[@casto-]

Great looking rig, did wonder if I’d missed something with a mchale being there 🤣.

[@davidcollingwood1262]

Good video George 🚜🚜

[@mrtrusty101]

Bloody awesome old boy, we’re back to bailing and a nice bit new bit of kit, my personal favourite thing to watch. We only need now is the yellow girl back on the fields and I’m set haha 😊😂 ❤ ya matey. Cheers Jase from Australia

[@summerfarmestates]

Looks a good machine that McHale

[@Massey-Lee]

Good video

[@eamoncummins8419]

Well wear with your new purchase. Hope she runs well for ye. Only the fusions are built here in Ireland. The other standard balers are designed here which is the important bit, but built abroad. You do and use what suits you. Keep up the videos. Enjoying your channel. 👍👍

[@josephlawless6013]

Be interesting to see someone run one of the continuous flow Vermeer bailers for a couple of years to see how they hold up and work in heavy materials.

[@Pete68T]

Nice Combo There.

[@trevorjarvis3021]

Smashing looking outfit you have there George, my cousin is a farming contractor and has been using a McHale round baler for a few years now and has been very pleased with it. I’m amazed how quick the door opens and closes on your model. Excellent video. ✊👍🚜

[@GeorgeSaunders]

It is rapid 👍

[@petelamps6055]

I remember back in 2008 we got a brand new mchale f550, thought it was brilliant, I’d like to try what your running, a tidy set up all round to be honest. Stay safe during silly season

[@chrislovejoy8249]

Nice looking baler George should last afew years 🚜👍

[@oisinwalsh3899]

I’m from Ireland and there very good balers we have a fushion 4 and everyone in Ireland has one and there really strong as well Great video 👍🏼

[@Paddy6.30]

would still go for a lely better made baler like

[@davidziebell1693]

We have a dairy farm in Queensland Australia and have a McHale F5500 baler we’ve had it just about a year now we got it with our new Deutz Fahr 5125G tractor and I’ll tell ya the Deutz and McHale make a great couple for baling with the rapid steer and stop/go on the tractor makes baling a lot better and smoother we bale a lot of roughage hay and stew not so much grass and she goes well

[@davidgoss4234]

Nice to see roller bales not belt baler my vicon has similar break system nice and simple

[@wilmidwales1287]

Nice looking outfit my new to me bailer arrived today in the field tomorrow to bail some hay

[@FirstnameLastname-qe3ry]

Great machine George, got the same baler early this may, been a lovley baler, the lely rp245 was getting a bit tired and had a few issues with netting, but the mchale is a great baler so far, perfect match with most of our tractors, it's normally on a 2017 maxxum 140.

[@GeorgeSaunders]

Did you have a look at the "new" Agco Lely's before you got the McHale?

[@toyotahilux2]

After baling with my welgar Rp12 for 31 years I've Just bought a lely 235 profi for this year! Very tidy with only 13,000 bales on the clock.

[@ianhaggart1438]

Nice one sir... the only thing i would want to try and change is the bloody buzzer.. but like an arcade with a bin lorry backing up outside 😮😅.. but they seem like cracking balers .. but thing we will stick with our two newhollands less cost in them 😉. Thought a fusion might of fitting the bill more for you ... stay safe 🏴󠁧󠁢󠁳󠁣󠁴󠁿

[@SEPK09]

Nothing quite like the site of bales in a filed :)))

[@james1c763]

nice job

[@jimconnolly3572]

Best of luck with the new baler, next video get someone to throw 3 10ft's into 1 for ye those balers are well fit for it

[@zzirSnipzz1]

Newhollands cvt will work a treat for that too with the auto pilot/stop thing

[@RCUKScaleModels]

hey George great video is always looking forward to upcoming video can you do a video on round bales vs square bells what is the difference?

[@michaellorio9774]

re bonjour George c est vraiment une belle presse et rapide , bon courage a toi pour la suite 😍👍👍👍

[@GeorgeSaunders]

Cheers Michael 👍👍👍

[@christopherdavies752]

Great vid George I can’t believe it’s my 25th year Anniversary as a Agricultural employee and loved every second. McHale sturdy had Demo few years ago but as long as Claas around and they keep making new stuff it’s just ease of use when you do 2400 acres a season

[@PaG1989]

Can you run the bailer with film as well George , it makes it so much easier to feed in winter

[@086LAVEY]

Great baler , you need to plum that up with the load sensing, way better job than constantly pumping

[@GeorgeSaunders]

It runs fine on constant pump👍

[@LordMuck]

Why don't you do pit silage ?

[@darrenjlobb]

😂😂😂

[@jackfrench7240]

Obviously that would be wagon silage too , because it is far superior

[@seanpower773]

😂😂

[@GeorgeSaunders]

You're getting banned!

[@LordMuck]

@@GeorgeSaunders f*ck me I've been trying for 10 years...

[@jankotze1959]

Very nice video George, what is the minimum HP rating to operate the 5600

[@ronnieg6358]

Enjoyed your presentation. I have a 5400 bought new a couple of years ago. It has a simpler control box with only 3 buttons and no fully auto mode. What is your reason for getting a roller (fixed chamber) machine? Most people go for a belt model. Like you I thought they were made in Ireland but they are made on the continent in somewhere like Hungary.

[@billupstateny9151]

Learned a new term today, courtesy of you tube. Apparently the UK calls illegal dumping, an act called "fly tipping". Not likely to catch on here, we still label this behavior, " illegal dumping ".🇬🇧

[@cmassey1653]

Might be no harm to use on load sensing far better job best of luck with your new machine 👍

[@John316OBrian-cm4fj]

Mr CVX had no luck with his McHale

[@kieranosullivan02]

was a fusion but same thing in the end I suppose

[@lindsayrae8868]

Looking good george , like your bale test lol I had a v660 metal guard McHale didn't like it , roller baler far better machine for me ...

[@BalesInTheDales]

Doesnt look like you have shaken the grass out. Is it because you dont have a tedder or because it makes better bales??

[@declanoshaughnessy7733]

Hi George best wishes hope you are enjoying the weather, love the T7.210 she is a new Holland beauty two questions which gearbox does she be spec on and the McHale 560 bailer is it running on 540rpm shaft have a great weekend ta ta cheers Declan 👍

[@GeorgeSaunders]

Hi Declan, she's a 50k power command and yes the baler runs on a 540 shaft👍

[@vincentwalker7134]

Looks a meaty machine George. How many brands did you consider or was it a no brainer to pick the Mchale..??

[@rayneary2097]

Would you consider putting 30ft swards threw her speed up the job?

[@daniellynch2466]

Running the baler on load sense or off the spool aux ??

[@Modlendingen]

A really nice baler, but you wouldn't consider a baler with variable chamber, to make bigger bales? The technology seems to have come so far that they are also able to make decent grass bales, not like the old ones :)

[@johngilbert5430]

Is there any price difference with the tamacycle

[@ballyhoulihanagrivideos397]

Lovely. Fine looking machine. Chopping the bales ?

[@GeorgeSaunders]

Yes, we've got most of the knives in 👍

[@caragray7010]

Nice outfit but l had a guy bale some for me with a mchale but my welger was a better bale. Can't beat the locking back door.

[@taniatomlinson5080]

With carting starting for the season do we get to see the new trailer in action?

[@GeorgeSaunders]

Yes, when it's finished, next job is shot blasting 👍

[@RICHIE87622]

You need some boxing gloves george! All that bale tapping!

[@Johnnycambell]

Why don’t u do silage pit

[@dennis657]

How come you didn't got for the baler and wrapper combo and it seem you moving the 4 time

[@John316OBrian-cm4fj]

Probably because he bales a lot of straw also

[@jimgannon1917]

will you buy a wrapper for the back?in the future

[@GeorgeSaunders]

We wrap at the stack 👍

[@michealhume3259]

Great vid as always, george I have recently changed from Massey to a nh t7225 auto command I love 😮the tractor. I can see your a tall bloke so presume you have the seat quite far back which is where I’d like it however if I have the seat to far back it constantly rubs and squeaks rubber on rubber i think on the interior on the right under armrest. Just wondering if you have same issues and if you do how to solve it apart from a rock hard seat🚜👍

[@GeorgeSaunders]

Don't seem to have that problem and I do have it right back👍

[@brendanwhite9799]

You should have gone the all the way and bought a baler raper combed save time and labour 😊

[@GeorgeSaunders]

We like to wrap at the stack👍

[@ballyhoulihanagrivideos397]

Does it work off power beyond ?

[@GeorgeSaunders]

Yes can work with power beyond, or any type of hydraulic system 👍

[@joshwhyte2770]

I think the two most common questions are “why don’t you use a wrake” and “why don’t you do clamp silage”

[@richarddrhellen1606]

Nice setup George! Why is it you are driving at 10kph? Isnt that really fast?Here we do about 3-4 (we use a 7m windrower so that makes a difference) anyways nice vid!

[@GeorgeSaunders]

Cheers Richard, I'd be doing the same on a 7 metre row. We're just following the mower so not as much grass going up the front 👍

[@richarddrhellen1606]

@@GeorgeSaunders I see😁 thanks for the answer👍🏼

[@jasoncatling5582]

It feed the cows all year round

[@danielcunningham5052]

Why do u need your tractor in constant pump?? Is your tractor not load sensing?

[@GeorgeSaunders]

The tractor has load sensing, but it's not plumbed up. It runs fine in constant pump👍

[@almaxx9680]

Why don't you do triangle silage? 🙄😲

[@johnearle6667]

Mchale are the best baler but you Should have bought a fusion it saves a lot of time

[@GeorgeSaunders]

We wrap at the stack 👍

[@williamoloughlin8298]

I was going to ask if you weren't happy with the compression of the bales, can you adjust them yourself easily (electronic tensioners) or is that an adjustment to the belt tension the service tech has to make? will look forward to the more indepth vid later. thanks George.

[@GeorgeSaunders]

Hi William, you get more compression from putting more material into the bale. You set the bale density on the computer from 1 to 10 and this then tells you when to stop 👍

[@jimgannon1917]

Why net and not plastic wrap?

[@sigarius1783]

They wrap It just before they stack.. less chance wrecking the plastic wrap during transport I guess.

[@stevenewman8465]

Hiya George why didn't you go for a rapper on the baler

[@GeorgeSaunders]

We wrap at the stack 👍

[@georginamoroney1668]

Should have gone for Kuhn comhi

[@GeorgeSaunders]

Why is that?

[@bobcrawford2105]

Grass don’t you Tedder it out ? Or do you just bale up straight after mower ? Why so many bales always better looking at it than for it good thinking

[@philleeson7835]

It's haylage so a cross between hay and siliage so its bailed slightly green, and doesn't need tedding as it doesn't need to be dry.

[@rhyslf]

This has no audio for me, has KZbin blocked it on copyright or something?

[@GeorgeSaunders]

Just checked it, the audio is fine.

[@rhyslf]

@@GeorgeSaunders Ah bloody KZbin prime downloaded it with no audio! 🤦🏼‍♂️Cheers George, great video as per always! Watching down under in NZ 🤙

[@GeorgeSaunders]

@@rhyslf 😂😂😂👍

[@jasdunlop9907]

Bad move should have stuck with lely or now in mf livery .had 2 McHale's first 1 good baler 2nd pile or shite it was like trailing a bag of spanners behind and bales all different sizes as it hasn't got latches on the back door

[@GeorgeSaunders]

Over a thousand bales through it so far without any problems, making lovely heavy bales. We wouldn't get the current version of the "Lely"

[@patzypinguin3285]

WHY DO U DO SO MANY BALES?