Get MASSIVE BASS DRUM - Live Sound Tips - Make your own Digital Trigger in your console

#LIVE #SOUND #TIPS
Join this channel to get access to perks:
/ @guillaumelortie
To support the channel please become a Member or a Super Member or Paypal : paypal.me/GLortie
Email : [e-mail]
Main Gear List and amazon.ca affiliate links : amz.run/6ahU
Behringer WING : amz.run/6ah9
Midas DL 251 #Stagebox : amz.run/6ahB
my live microphone : amz.run/6ahD
In-Ear Monitor : amz.run/6ahE
Headphones : amz.run/6ahF
Audio Interface : amz.run/6ahJ
#How #Help #Oscillator #kick #Best #audio #User #basic #Signal #Drum #Pro

[@dmoss1285]

what a cool trick. Have never seen this before Guillaume, thanks.

[@GuillaumeLortie]

Check out the one I did for Snare

[@neutrinou]

Hi! Thanks for the trick. But I use to play with the suboctaver effect on XR18 & X32 to get some downpitched harmonics on 40-50Hz. I think it is easier because it automatically match the kick drum tuning without any configuration. Maybe I should try the oscillator next time to see if I'll love it as much as the suboctaver. 😁

[@GuillaumeLortie]

Oscillator can be used to add or replace the low end of the kick, if you have a bad drummer, that can save you.

[@dighawaii1]

many ways to get more of fundamental :) Even just using a yamaha subKick mic. Or triggering samples with a very fast/short gate. It's great to have the keyed oscillator trick handy, especially for sections of songs that might benefit from a variance of the sub enhancement from whatever you're using on the other 90% of a band's songs. You know, a halftime breakdown or something.

[@AbiodunAdetutu-gg7mv]

Nice job I love this. I've learnt a new technique today. But is it possible with xr18 beringer digital console?

[@rolfdc2934]

Hi Guillaume, nice video to see the bassdrum trick explained on the Wing.

[@GuillaumeLortie]

you’re welcome Rolf! hope it will help you out

[@germanboza]

Thanks for the tip Guillaume! I’ll try that this weekend!

[@GuillaumeLortie]

you’re welcome German! if you blend it correctly, this is a way to add a lot of power to your kick good luck!

[@germanboza]

@@GuillaumeLortie I tried it today… WOW!

[@GuillaumeLortie]

@@germanboza glad you liked it ! stick around for the next one Wednesday.

[@Bobby_Uterus]

I’m assuming on an M32/X32 you would have to use one of the mix buses? As the oscillator is not assignable to individual channels.

[@GuillaumeLortie]

Exactly 👍🏻 You can sidechain a bus Gate form a channel

[@Bobby_Uterus]

@@GuillaumeLortie Thank you.

[@leopitri]

Have you tried this on toms? to add some sustain or some body?

[@GuillaumeLortie]

Yeah! Working great! I also use it on Stomp box to get real low end going.

[@user-js3pe6gk1n]

WOW! Tnx!

[@joshu3392]

Thanks for the great video sir I will personally go and try it out, I have another question unrelated to this, what is the best way to use reverb on this console? I personally put it on a bus then SOF channels to that bus but av found that when I now put those vocals output to another bus(our stream bus) the result isn't great and they make the drums sound very far away... Please help

[@GuillaumeLortie]

Hi Joshu I use post fader bus send. I send those bus to my Main and use the SOF to send into the reverb. kzbin.info/www/bejne/pZ-2fWSgZdiUobc

[@GuillaumeLortie]

@goce79 I think i actually have a video on FX send on Bus kzbin.info/www/bejne/pZ-2fWSgZdiUobc

[@GuillaumeLortie]

@goce79 posted in both of my last comments

[@ikman6480]

Had a similar challenge Joshu. I have a effects bus, then I send my vocal channels to that effect bus then send that bus to the mains. This worked very well for the house but I also found similar issue with the effects not going to my stream. What I now do is that I send the FX bus to my stream bus (bus to bus sends) which is something I learnt from @Guillaume and that seems to work just now. It feels fleamsy but works and I am honestly thinking of a better way to do it; challenge is I really need to use a separate bus for my stream

[@juantv5840]

Can i use 2 signal generator at the same time ? One at 50hz y other at 130 hz.. at the same time . Diferent channels. One for kick and other for snare?? How

[@GuillaumeLortie]

Yes 🙌 The wing has 2 Oscillator

[@Filis96]

Thanks! Nice trick.

[@GuillaumeLortie]

Hi Filips Response is good so far, i will have more in the near future

[@alohaadane]

Thanks for sharing. 2 questions, what is the source for 50 Hz audio? Can I do it on soundcraft Si performer 3?

[@GuillaumeLortie]

Hi 👋 the signal is coming form the console Oscillator / tone generators I just check and the SI Performer 3 has a built in Oscillator/ Pink noise generator. if you can, assign the signal to a channel and treat it like if it was a microphone, if you can only send it into a bus, send your bus to the Main out. also, you can use a external source, like a phone with a signal generator app. hope it helps.

[@lawlothegradiator7723]

Thanks bro

[@LosDelVIEJONORTE]

I want a clicky kick, can i use the oscillator in a higher frequency for that??

[@GuillaumeLortie]

To do that, you need to change it for a White Noise and use a Low Cut and High Cut Good luck ! ( thank for the reminder that I need to do a video about this )

[@LosDelVIEJONORTE]

@@GuillaumeLortie thanks ill try it

[@djjuancarlos2]

is there an oscillator for toms >>>?

[@GuillaumeLortie]

Same principle can apply here! Experiment with it

[@juantv5840]

Hi amigo. Can it be use for toms too ?? What frecuency??

[@GuillaumeLortie]

Hi Juan 👋 Yes it can be used, look at your Tom or Floor, the RTA will display the fondamental frequency of that dum and divide that by 2 ( if you Tom natural low frequency is 160hz ) Generate a Tone at 80. It will beef it up by a lot !

[@victorinholepere5620]

Le meilleur du Canada

[@victorinholepere5620]

My ingénieur