cable routing through the headset is a huge red flag
@zdravo4 Жыл бұрын
So in nowadays you can see how everywhere designers make our lives harder
@dzonibravo7867 Жыл бұрын
Why all that hustle? Because of aesthetics? 👀 People are weird.
@_Zane__ Жыл бұрын
Looks like a pain in the ass 😂
@celynjones4958 Жыл бұрын
More hassle than it's worth. Another case of German overengineering.
@nicx4603 Жыл бұрын
Bike manufacturers just continue making maintenance a pain 😩 why tho?
@johnykryll Жыл бұрын
What a nightmare, bad enough they go through the frame, now they go through the headset, jeez what a waste of time
@haimCohen-i6j Жыл бұрын
Man, you are a godsend. Thanks for the great video! I had so much trouble trying to tighten the protection ring and did not know that it could and should be tightened AFTER closing the top cap, through that little hole from the outside, hence creating the required compression from top to bottom of the headset. I have a Neuron 2023 CF SL and it has the same structure with ACROS integrated headset cables. There's play in the headset from the minute I received the bike and still after numerous attempts it's either too tight, or too loose. Canyon should pay you for the great service you do for them. The internal cables through the headset is such a bad idea!!!
@robp3431 Жыл бұрын
Bearings on my Canyon gravel bike went bad much sooner than on my (many) other bikes.
@nameresu Жыл бұрын
Why do you even need this on the hardtail? It doesn't even looks cleaner than regular internal cable routing.
@Exgrmbl Жыл бұрын
it is kind of odd. Not like aero matters on an MTB. Truth be told, as a 90s kid i am partial to external cables, it always reminded me of the hydraulic lines on excavators and such
@LucaBaronti-k1w Жыл бұрын
Hi, thank you. It's very useful. I have exactly the same Canyon Exceed 2022 model. My lower bearing is stucked and gone. I have to buy and substitute it. Do you know the model or the size of the lower bearing?
@Chunky2469 ай бұрын
I've done a similar service on my Lux (same headset routing). The only difficult thing I found was only having two hands :) Can be hard to hold everything and line everything up while offering up the fork.
@ToddNZMTB Жыл бұрын
Apart from that nightmare the bike actually looks quite nice 🙃
@CelsoBarbosaMTB11 ай бұрын
The cable integration is not related to any particular brand but to bike industry instead. The only advice I can make is to use that shimano bearing grease inside the bearings only and for assembling parts and rust protection choose a carbon compatible grease instead.
@fcdhgio5 ай бұрын
Nice video! I'm gonna check this on my bike. What grease do you use?
@ronicallmen9 ай бұрын
What is minimum bore diameter of head tube of frame that can insert the internal cable.
@camperp195 Жыл бұрын
Got this on my cube stereo e mtb,its a nightmare! You have to undo,dropper cable,rear brake hose,and gear shifter cable to replace the top bearing 🤬
@michaslusarczyk6371 Жыл бұрын
After removal of hydraulic cables from brake lever can I reuse them or do I need to instal new inserts in hydraulic cable and then reinstall them?
@Chunky2469 ай бұрын
Yes you can reuse them. If you do it carefully enough there is no need to bleed.
@zabibmx7 ай бұрын
4:09 TAK O, TERAZ TO :)😜
@_.1gnelis._974 Жыл бұрын
u are amazing
@Optichin Жыл бұрын
Canyon Bikes just suck
@Chunky2469 ай бұрын
Well they are winning just about everything at the moment.... Cross, MTB, Road...
@paultorka67615 ай бұрын
Danke!
@cannondany19 күн бұрын
Thank you so much!
@ingtoningtonington149 Жыл бұрын
Why would I bother? I'll just keep riding my Caad 3 Saeco. Dont have any of this nonsense.
@zabibmx7 ай бұрын
THAT'S ONE IS EASY COMPARE TO SWORKS TARMAK SL7 MECHANICAL ,WHERE ALL THE HOSES GOING THROUGH THE HANDLEBAR AND STEM. @ZABIKES