Get Rid of ⚠️TPMS indicator light on Toyota Tundra...5min PERMANENT FIX‼️

Today we are going to do a DIY on Toyota Tundra TPMS. It's a simple fix and the inexpensive way of doing it. It only takes 5 to 10 mins at the most. Make sure you Like, Share, and Subscribe to the channel for more content😊.

[@boprice6]

Holy smokes. Thank you so much bro. Worked like a charm on my 2016! Just saved a crap ton of money

[@deerslayer6419]

Thank you so much! I have a 2013 Tundra that the TPMS sight is starting to act up. I will definitely try this fix when that light can no longer be reset. They are great trucks, thanks again.

[@JamesJones-vp5fq]

Thank you! First video that looks like mine. I’ve tried several different wires. 👍🏻👍🏻👍🏻

[@jorgecardenas35]

Awesome video. Permanent fixed my truck. Thank you!

[@wettwett3211]

Thank you. Very useful and informative video.

[@donpizzo8963]

Thank you. Works on the 2007 Tundra as well. Reach under the glove comp and D/C the connector for jumper installation - and no light after that.

[@espooge]

2010 Tundra. Light blue and Yellow. Worked like magic. Thanks! Take my upvote and sub.

[@Halfflip]

What did u use to crimp wires

[@EnriqueGarcia-oe3bl]

Best video and helpful best easy fix..love it😊😊

[@larrystebbins]

2015 works perfect thank you very much

[@adrianchiban9321]

Thank you brother! Works perfectly! Had the same issue as you!

[@davidreasons9730]

Thanks Great fix

[@Russ8panic]

Nice Tundra sir!!! Thanks for the video!!!!!

[@coghillmatthew]

So you just crimped the wires together? Which wire stays plugged in? Nice work. Thanks. These tps lights are horrible .

[@jakubkasprzynski5501]

Works great, my tpms wouldn’t want to turn off after new sensors. Discount tire had no clue and wasn’t going to pay Toyota $135.

[@ozkarmartinez9722]

I had my doubts if this trick works but if it works and it is very fast 5-10 min you only need a flat head scrudriver , wire cutters and some electrical tape 2014 Tundra SR5 Double cab Work perfect 👌

[@Shakez76]

I think this works on the Yaris and Rav4 too! Thanks!

[@pedrofig7958]

That was definitely helpful

[@williammoore7085]

If you changed the tpms sensors then you will have to plug into the computer and tell it you changed them, the relearn button will not work for this function since Toyota uses a direct input system.

[@slickwhip_talk]

@@williammoore7085 they have aftermarket Bluetooth TPMS sensors where you can monitor the air pressure off the android or Apple play radio

[@altimax9091]

Looks great! What's your mpg?

[@ronnielong9676]

I’m going to try this. Every time I use my remote start my TPS malfunctions then it takes weeks to reset.

[@armymxere5]

what deck is that ? info please

[@surfearth1]

The reset button does not “relearn” or register the TPM chip with the truck. You need a hand held device to register the ID numbers. What it does do is set your low tire pressure setting. What that means is that it allows you to set when the warning light goes off. To do this put all your tires at the proper tire pressure then push the reset button. It should then inform you when a tire is 5lbs off from this “ideal” pressure. Just make sure all tires are at the proper pressure before you do this. Or at least this is the rumor.

[@slickwhip_talk]

Yea in some cases that will work but in others some won't relearn even after you replace them with new ones and register the ID bc you might have tried too many times to relearn it.

[@coghillmatthew]

Discount tire wanted 240$ to replace tps and it may not even work. I'm definitely doing this.

[@garrettdazen6288]

That's the quote I got as well. Almost 500 from the dealership. ​@@coghillmatthew

[@johndimalanta9978]

THANKS THIS WAS THE BEST VIDEO I'VE SEEN SO FAR GONNA TRY IT !

[@deltaairconditioning7139]

Cramped! Together, lol ok can you please explain cramped Together

[@garychipman3095]

On mine, 2007 tundra sr5. Mine has 2 yellow and 2 light blue.😮 Which one do you tie together.😂 Thanks

[@carytrav]

Sweet ride, I have the same radio. Do you have a problem with it booting up or coming on? I did the wire mod just like you said to. It worked on my 2013. Thank you so much...

[@slickwhip_talk]

My radio works fine no problems

[@Piratedavessaltylife]

Thanks, bruh! Just got new sensors installed but won't do that again.

[@Cerceify]

I opened my door,pressed on the brakes repeatedly and fiddled with the switch. Done. Oh I did fiddle with the gas cap first as I had just filled up the tank but that didn't work

[@mode1charlie170]

How about replacing the bad sensor or battery in the sensor.

[@ebglock]

He said all was checked by the dealer.

[@ethanchauffe5861]

put 35s on my rock warrior two weeks after i got it in 2009, this mod is14 years in the making for me

[@slickwhip_talk]

@@ethanchauffe5861 cool

[@BOMBEIRINHO1]

Very nice video, but it didn’t work on my 2008 tundra

[@chrishoang6965]

You know the size of wires that u r splicing

[@guns-usa8564]

What exhaust? Do you have sounds good

[@slickwhip_talk]

Actually I deleted the cats and had it tuned

[@Copenkind]

What year models does this work on? No mention of year model truck this is.

[@jamesd4503]

Worked on my 2013 !

[@mattdaniel2395]

I have a 2010. When my light came on it has stayed on amd disabled my cruise control. Will this procedure allow that to operate again?

[@slickwhip_talk]

@@mattdaniel2395 that I'm not sure but I will tell you this my cruise control still work. So that might be another issue you have going on

[@JasielAvalos-xq3fe]

👌👌

[@Dirty-MFSouth504]

When you say "crimp" are you splicing into one another or you're eliminating those 2 wires out of the harness?

[@slickwhip_talk]

Slicing into one another

[@idreesafzali9660]

What does that mean, joining them together??

[@clawhammer704]

I just let mine stay on. Iv got used to it now. I’m not paying the stealership big money for 2008 Yaris light fix.

[@nfpsrocketiptvftaiksdonati4954]

Did not work for me 2011 4.7 Tundra

[@edlyli7166]

Toyota dealership should hire you

[@ebglock]

Toyota would not allow you to change.

[@fredf6]

What year is your truck? Tire sensor batteries are only supposed to last 7-10 years. It could have been a battery going low. Replacing the sensors fixed my issue on my 2010 tacoma.

[@slickwhip_talk]

13

[@Tulkien]

Wheres the battery??

[@rcdad2]

Same here flashing usually means one of the batteries is weak Tire shop replaced all 4 sensors and problem gone

[@nickjohn2490]

Will this work on the 14 plus?

[@slickwhip_talk]

I'm not sure I haven't looked under the passenger dashboard on those. I'm waiting for my brother to tell me

[@ozkarmartinez9722]

I try on my 2014 sr5 and work perfect 👌

[@navidsoroush8777]

Where did you get the clamps from?

[@slickwhip_talk]

You can get them from any hardware store....I got mine from home Depot

[@navidsoroush8777]

@@slickwhip_talk thanks; so is the idea to disconnect the wires? The small metal plate that cliques in between the two wires, is that basically cutting the wires connetion but keeping them in place? thanks

[@Tulkien]

Seat belt indicator! Would be great 😅

[@slickwhip_talk]

It's a OBD that turns the seatbelt indicator off

[@deanetteabeyta3090]

I don't have a blue and yellow I have a purple and yellow and those ones are at the very end

[@deanetteabeyta3090]

I have a 2018 Toyota tundra and it's kind of different from your plugs what plugs do I splice

[@johndimalanta9978]

Slickwhip tried this and it didn't work TPMS light still on FAILED attempt ! ll

[@slickwhip_talk]

What year is your truck?

[@RaysGarage]

I also have a 2007 Crewmax and this did not work for me either, TPMS light is still lit??? I did jumper the exact two wires on the same connector that was done in this video.

[@IsleOfFeldspar]

I’ve hated TPMS ever since it first came out. That stupid light is always on.

[@mandovapehater6988]

Thanks. Heres you a tip. Better get some gas ...😢

[@johndimalanta9978]

2007 crewmax

[@slickwhip_talk]

It should have worked....Did you use the right wires?

[@johndimalanta9978]

light blue and yellow