Get the film look with free Magic Lantern firmware

  Рет қаралды 257,659

Jake Coppinger

Jake Coppinger

Күн бұрын

Пікірлер: 210
@StevetheBartender_
@StevetheBartender_ 7 жыл бұрын
Updated 600D firmware to 1.0.3 only to realise I had to downgrade back to 1.0.2 - apart from that though, I found the video to be extremely helpful! Thanks bro!!
@JakeCoppinger
@JakeCoppinger 7 жыл бұрын
Sorry I didn't mention that, I'll add a caption!
@Thoracius
@Thoracius 3 жыл бұрын
@@JakeCoppinger I believe it's also not recommended to be using the latest firmware on the 5Diii.
@treroy101010
@treroy101010 7 жыл бұрын
worth noting only available on 1.1.4 for t5i. just upgraded to realize i now have to downgrade back to 1.1.4
@RSpudieD
@RSpudieD 7 жыл бұрын
IDK if this is still relevant to you but I just checked and 1.1.5 is available.
@peterwise
@peterwise 5 жыл бұрын
Same for T3 - i upgraded to 1.0.6 and then had to downgrade because ML only supports 1.0.5 which is what I had to start with...
@RosyadAs
@RosyadAs 4 жыл бұрын
i think the video tittle is kinda missleading, this should be tittled "how to install magic lantern"
@vladimirlenin4080
@vladimirlenin4080 4 жыл бұрын
Still very useful
@LindaAZollo
@LindaAZollo 6 жыл бұрын
This tutorial was a lifesaver and seriously eased my anxiety 😅 I was able to successfully update my firmware first, then correctly install on the SD card (after running out to buy a card reader) and then ultimately installing ML on my T5i 🏆 Thank you so much Jake for making it flow so easily. The directions on ML website were not detailed enough for me to feel confident to do the install. Cheers!
@johngalvan4879
@johngalvan4879 4 жыл бұрын
awesome video. been contemplating on whether or not i should install magic lantern on my 60d. this was very insightful.
@alistair_dj
@alistair_dj 6 жыл бұрын
Underrated Channel
@emadleiman47
@emadleiman47 6 жыл бұрын
Nice video. Could you also make detailed Magic Lantern tutorial videos showing the different effects and techniques with the proper settings? Thanks.
@blendering3D
@blendering3D 4 жыл бұрын
For now I'm gonna stick to what my SL2 is natively capable of, magic Lantern seems pretty tempting but I don't want take the risk of permanent damage. When I get my Sidekick camera I'll reconsider installing it
@RSpudieD
@RSpudieD 7 жыл бұрын
This is a very informative and well-produced video. Nicely done Jake!
@REMRODFILMS
@REMRODFILMS 5 жыл бұрын
hey bro can you format the card without deleting ML or does it delete once you format???
@theycallmemrglass
@theycallmemrglass 5 жыл бұрын
Thanks for your informative video but I just like to advise you to put an update bubble text over your video when you say "update to latest firmware" to "Make sure your firmware version is the one supported by magic lantern". As some Magic Lantern versions will not work with latest Canon firmware. I just installed mine on 650D and look forward to learning the new features. Thanks. (I note you did put an update in your description...but adding a text overlay would be cool as most viewers tend not to read descriptions on youtube)
@Jmf_tattoo
@Jmf_tattoo 8 жыл бұрын
magic lantern is amazing.... but unfortunately like the list you showed says. 70d is still in progress :( i uploaded the version they have for it but it was so incredibly unstable i had to delete it. it bricked my 70d for an hour. black screen and wouldnt do anything. then magically it turned on and i was able to get it off. hopefully they get the in progress versions up to date sooner than later because it adds so many features. it really helps.
@JakeCoppinger
@JakeCoppinger 8 жыл бұрын
Glad you could unbrick yours!
@SwimbaitChronicles
@SwimbaitChronicles 8 жыл бұрын
+Jake Coppinger I was too! Lol
@JakeCoppinger
@JakeCoppinger 8 жыл бұрын
+Swimbait Chronicles I'll make sure to stay away from the 'in progress' builds on that advice! Thanks :)
@iamlewis2971
@iamlewis2971 8 жыл бұрын
Would i need to keep ML on my sd card and if so will i have to install it onto all my sd cards?
@buttonholes
@buttonholes 8 жыл бұрын
"First, set your camera to _______ mode." At 4:34...what mode? I can't understand the word being said. thanks!
@buttonholes
@buttonholes 8 жыл бұрын
sorry, "Video mode"?
@JakeCoppinger
@JakeCoppinger 8 жыл бұрын
Sorry if I wasn't clear, I said video mode! (the one with the film camera icon)
@Kandufilms
@Kandufilms 8 жыл бұрын
do you have to keep the SD card everytime you use ML? or no, Cause I have a really fast SD card and want to record raw onto it instead of Compact flash is that possible? for a Canon SLR
@dramapractice9995
@dramapractice9995 7 жыл бұрын
I just upgraded from 2.0.2 to 2.0.3 on my EOS M because you told me to and then found out that the latest Magic Lantern version for EOS M only runs on 2.0.2 and now I'm on a wild goosehunt trying to figure out how to downgrade firmware. He should have mentioned that you should check what firmware ML runs on for your camera before you update. Anyone know how to downgrade firmware on an EOS M? Cant find any downloads for the earlier firmware.
@manoj238
@manoj238 6 жыл бұрын
For my 5D mk iii I had to downgrade from 1.3.4 since ML for 5D mk iii is available only for firmware v1.1.3 or v1.2.3
@CozmoNz
@CozmoNz 7 жыл бұрын
Amazing b roll man, well informed vid and overall very well done! props!
@JakeCoppinger
@JakeCoppinger 7 жыл бұрын
Thanks!
@MelvinJoseFilms
@MelvinJoseFilms 8 жыл бұрын
Good video bro. I love using magic lantern for the RAW video functions
@CFMSC
@CFMSC 8 жыл бұрын
Hey Jake, great video, finally got the courage to install it on my 60D. Just one question, I have multiple cards, do I need to have ML saved to all cards? And do I need to "install" ML every time I change cards? Cheers
@maxgstudio5133
@maxgstudio5133 8 жыл бұрын
You need to have the same version of magic lantern on all cards and settings might change while swapping. I am not sure about the need to reinstall it everytime you swap, but I think you don't have to.
@prathish90
@prathish90 8 жыл бұрын
thank you Jack!! This video of yours was an eye opener :)
@timsulzberger6658
@timsulzberger6658 6 жыл бұрын
Outstanding video with great content, clear instructions, and excellent editing. Nicely done, sir!
@kennynvake4hve584
@kennynvake4hve584 4 жыл бұрын
So the camera is looking at the firmware on the card and using only that firmware to operate it..?
@rcflyer898989
@rcflyer898989 8 жыл бұрын
Is there anything like this for nikon?
@eraldylli
@eraldylli 8 жыл бұрын
No, there isn't unfortunately. Magic Lantern is a big swaying point for dslr shooters when they choose their camera system (whether Canon/Nikon/Sony/MF43).
@icepl4net
@icepl4net 7 жыл бұрын
fstoppers.com/video/nikonhacker-brings-magic-lantern-style-firmware-hacks-nikon-9601
@thesnapshotspicturisation5422
@thesnapshotspicturisation5422 7 жыл бұрын
Canon 6D Mark 2 Not Listed In There What I Will DO?
@tahauddin
@tahauddin 7 жыл бұрын
Hey bro... ur vids are awesome... the tutorials are very helpful... May I know what font do u use for the titles?... the one that looks like helvetica... please help me... love from india
@ThereseEriksson
@ThereseEriksson 8 жыл бұрын
I have canon EOS 750D its a upgrade from the 700D what I have thought, but this SD card update only work on the 700D? Or is it working on my camera too? =)
@DigitalPraise7
@DigitalPraise7 6 жыл бұрын
ALERT! WARNING! Format the SD card to remove magic lantern. I repeat, format...don't delete, magic lantern! I simply deleted ML and. My T3i would not turn on. To summarize, format the SD card to remove ML. ML works fine on T3i but you must format SD card to remove ML. That is all.
@NARRASSAFilmes
@NARRASSAFilmes 4 жыл бұрын
What happened if I change my sd card for other without the magic lantern installed?
@GanjaBro99
@GanjaBro99 4 жыл бұрын
@@NARRASSAFilmes Magic Lantern menus will not show up, i guess...
@srkanna82PBF
@srkanna82PBF 6 жыл бұрын
IS CAN SUPPORT SL2 (200D)
@lambheaven2113
@lambheaven2113 6 жыл бұрын
Stunning, nice work
@sagarparmar3628
@sagarparmar3628 7 жыл бұрын
is this work in Canon Eos 1300d / rebel T6???
@manichauhan007
@manichauhan007 8 жыл бұрын
Gr8 tips for me..I have canon 600d n i ll try everything u said...cheers bro for the guidence
@JakeCoppinger
@JakeCoppinger 8 жыл бұрын
+Mac Singh Glad you found it helpful!
@JakeCoppinger
@JakeCoppinger 8 жыл бұрын
Let me know if you have any troubles with the process!
@147andymc
@147andymc 8 жыл бұрын
I used magic lantern once but then got rid of it because my friend told me it corroded (I think) the firmware on his canon. Is magic lantern really safe because if it is I can see how it will greatly improve my cinematography. any opinions?
@JakeCoppinger
@JakeCoppinger 8 жыл бұрын
I can assure you it does not touch the firmware on the camera. It runs from the SD card, meaning that if you want to remove it you just format the card. The danger comes from the camera attempting to run a corrupted copy of Magic Lantern - so make sure you let it finish copying before pulling out the SD card from your computer.
@JakeCoppinger
@JakeCoppinger 8 жыл бұрын
You can see more details on the Magic Lantern Frequently Asked Questions - wiki.magiclantern.fm/faq > "Does Magic Lantern completely replace Canon firmware?" No. Magic Lantern runs from the card, as an add-on over standard firmware. You will still be able to access all Canon functionality. To go back to Canon firmware, you may: Press and hold SET at startup to bypass ML only once (for the current session). Format your card in the camera and choose to remove Magic Lantern. Disable the bootflag (this will uninstall ML from the camera; to do this, run Firmware Upgrade and follow the instructions).
@147andymc
@147andymc 8 жыл бұрын
+Jake Coppinger Thank you, this really helped! will definitely use it in the future. :)
@v-Dawg300
@v-Dawg300 7 жыл бұрын
I love the colour grading you did on this video. So awesome. Did you use any LUTs? And if you did is there any way I could get a copy of it for free? Awesome video.
@陳敬和-h6l
@陳敬和-h6l 8 жыл бұрын
This helps me alot to download the magic lantern. Thanks Dude !!
@CallMeMrRook
@CallMeMrRook 8 жыл бұрын
when i saw 40D wasn't being developed my heart sank ... :( but hey i have a 5Dii i could try it on, looks so good though
@stekkerbox
@stekkerbox 8 жыл бұрын
CallMeMrRook :/. Is your 5d m3 doing good with Magic Lantern?
@CallMeMrRook
@CallMeMrRook 8 жыл бұрын
Stekkerbox I've been stupidly busy and completely forgot to install it...thanks for reminding me
@stekkerbox
@stekkerbox 8 жыл бұрын
CallMeMrRook haha have fun!!
@BokehAddict
@BokehAddict Жыл бұрын
no graba ni a 1080p ?
@Mr1xiii3
@Mr1xiii3 8 жыл бұрын
What would be good for in still photography? I shoot both video and photos, and I've thought about doing this for some time now.
@JakeCoppinger
@JakeCoppinger 8 жыл бұрын
Lots of things! From Adam Kumiszcza at www.quora.com/What-features-of-Magic-Lantern-are-useful-to-photographers: - RAW histogram (normally histogram is based on the preview, not raw file, and is often inaccurate - you could push a bit to the right without overexposing) - Auto ETTR (Expose To The Right) - the camera automatically exposes to the right of histogram - see the links in [1] - Dual-ISO - takes a photo with different ISO value for alternating lines in a frame, making it possible to have a larger dynamic range, see [2] - Focus stacking (for macro) - Advanced bracketing (automatically select the number of frames for HDR photos to get the whole dynamic range, can alternate Av, Tv or ISO, more than 3 exposures, bracketing for exposure, flash or depth-of-field) - Better management of white balance - Trap focus - takes a photo whenever an object gets in focus (useful for wildlife photography for instance); there's a motion detect mode too - Intervalometer for time lapse - Auto Exposure module to get a better and customizable Auto ISO - Silent pictures - shooting fast photos without using mirror (in live view)
@Mr1xiii3
@Mr1xiii3 8 жыл бұрын
Thank you! I'll give this a much needed thinking.
@Mr1xiii3
@Mr1xiii3 8 жыл бұрын
UPDATE: I tried it out and I am in love with this. It gives me features that I have to have external accessories hooked up to the camera to get. My biggest usage of it right now is Timelapses. But I love the zebra, fibonacci overlay, and dual iso, and bracketing. These are all things I could never have on my t3i. thanks again for the video and your help.
@JakeCoppinger
@JakeCoppinger 8 жыл бұрын
Glad you found it helpful!
@eyebeebak
@eyebeebak 7 жыл бұрын
I usually reformat the sd card after each photoshoot so that means it also wipes out the ML firmware on the sd card. Does that mean I have to copy the ML firmware onto the SD card after each format and install it again?
@studio808
@studio808 6 жыл бұрын
Hi i have a cannon 550d, when using it with wirecast via game capture i get black bars either side, obviously you can crop it by increasing the size on wirecast but id imagine you lose quality slightly, is there a way to have it so it shows as a 16:9 aspect radio to fit the window in wirecast without showing anything else in the display so we have a clean video for live stream?
@genesis204
@genesis204 6 жыл бұрын
I have Magic Lantern installed on my SL1, but the frames keep skipping and it stops rolling. Any ideas? aslo have flickering when im in ML. Thanks in advance!
@JakeCoppinger
@JakeCoppinger 6 жыл бұрын
What card are you using? Sometimes the SD or CF cards aren't fast enough, while sometimes the actual card writer in the camera isn't capable, so you will have to decrease the resolution. Try borrowing a faster card and see if that fixes your problem. Is the flickering due to artificial lighting? If so changing the shutter speed will fix that.
@genesis204
@genesis204 6 жыл бұрын
Jake Coppinger I was using a 16gb 40 mbps, just bought a faster card yesterday, 128gb 80mbps, still same problem, starts skipping frames about 6 seconds in. The flashing is something software related I think. It flashes back and forth from the ML menu and the live view. I really want to use ML but these issues are making it useless to me.
@Sara-tp6zd
@Sara-tp6zd 5 жыл бұрын
Sadly the t6 is not listed. Great video
@maddmike23
@maddmike23 7 жыл бұрын
Would this work with Canon T6? Would there be a difference on the video?
@nunyabizz6083
@nunyabizz6083 5 жыл бұрын
Mik3 did u figure it out ?
@NARRASSAFilmes
@NARRASSAFilmes 4 жыл бұрын
What happened if I change my sd card for other without the magic lantern installed?
@jodroboxes
@jodroboxes 4 жыл бұрын
Then you will just run Canon's native firmware.
@IsabellaAdina
@IsabellaAdina 8 жыл бұрын
thank you so much! :) this is so coool!
@JakeCoppinger
@JakeCoppinger 8 жыл бұрын
Let me know what you think when you try it on your camera!
@IsabellaAdina
@IsabellaAdina 8 жыл бұрын
Jake Coppinger I will! :)
@Chappysnapz
@Chappysnapz 6 жыл бұрын
Does magic lantern make it so you can record over the 12 minute limit?
@mnlitan65
@mnlitan65 5 жыл бұрын
Is it saported for kanon 4000D?
@bryan.w.t
@bryan.w.t 6 жыл бұрын
Does it have any extra features for photos?
@AndrewTyberg
@AndrewTyberg 6 жыл бұрын
Great video, very well explained!
@loganderb
@loganderb 8 жыл бұрын
So will my t6s not be able to get this?
@MrETphotography
@MrETphotography 7 жыл бұрын
my 5d3 Firmware is 1.3.3 can?or only can use 1.2.3?
@isntitgreen
@isntitgreen 8 жыл бұрын
finally the video that I needed thank you so much, excellent video :D
@JakeCoppinger
@JakeCoppinger 8 жыл бұрын
Thanks!
@tobitings8048
@tobitings8048 8 жыл бұрын
Are there any changes to shooting stills aswell or can i just continue using it as always and just enjoy the advanced options when in video mode?
@JakeCoppinger
@JakeCoppinger 8 жыл бұрын
+TFu It changes the interface for stills but I find it much more intuitive than the default interface. You can still use auto mode! Magic Lantern has lots of extra features for still photography too.
@annoynymouse1146
@annoynymouse1146 6 жыл бұрын
Is that compatible with the Eos M50?
@natasfresas
@natasfresas 8 жыл бұрын
Nice vid. But I would've liked more if you explained more about the options and good settings of magic lantern instead of installing it. There are plenty of tutorials on how to install it but few about how to use it properly. Anyway thanks for the focusing tip, I love your work
@JakeCoppinger
@JakeCoppinger 8 жыл бұрын
At some point I might make a tutorial about that. I wanted this one to be a straightforward end-to-end guide on what it is and getting started, especially for those worried about the safety aspect. It's tricky because there are so many different ways of using Magic Lantern. Thanks!
@Shapomark
@Shapomark 7 жыл бұрын
so it'll match with eos m, but not with eos m10?
@socaminister
@socaminister 6 жыл бұрын
do you know if there is a way to have the output on ml to be 1080p? since canon outputs their hdmi to 1080i by default and my field monitor works best with 1080p, i didnt know if there was a way to change that output signal? any solutions come to mind? i am currently using a t5i
@JakeCoppinger
@JakeCoppinger 6 жыл бұрын
I haven't tried this, but a person on the ML forums seems to have a solution: www.magiclantern.fm/forum/index.php?topic=9225.0 "To Get the progressive signal out you have to do reverse telecine (3-2 pulldown) that will get a 23.976 stream from the 60i stream."
@tommynationofficial
@tommynationofficial 7 жыл бұрын
WARNING: DON'T upgrade the firmware on your camera before checking what official FW is supported!
@saracenrush2010
@saracenrush2010 7 жыл бұрын
I take it you couldn't downgrade then
@JakeCoppinger
@JakeCoppinger 7 жыл бұрын
I can confirm you can downgrade with the same procedure. If you have any troubles shoot me an email (in the description) and I'll help you out. Sorry I didn't put a notice to check the supported version first.
@matejradovan629
@matejradovan629 5 жыл бұрын
I have 1.0.3 but how can i get 1.0.4 if i can find just 1.0.5 firmware?
@matejradovan629
@matejradovan629 5 жыл бұрын
Is ML for photography too and how do I get back to the canon software
@andrew2180
@andrew2180 5 жыл бұрын
It's mainly for video. It doesn't replace the original firmware, it just adds a layer on top of the system that came from the factory, it's installed on the SD card.
@matejradovan629
@matejradovan629 5 жыл бұрын
I have installed it on 650D and its not working
@derus001
@derus001 8 жыл бұрын
Did you use the FPS to make the time laps on your intro? Would really like to know how you managed! Thanks in advance
@JakeCoppinger
@JakeCoppinger 8 жыл бұрын
I used the intervalometer feature to shoot raw frames 5 seconds apart, meaning the original timelapse was 4k! I might create an in depth tutorial if I have the time.
@jhellier
@jhellier 8 жыл бұрын
Can ML run from compact flash card? I save images to SD
@dan7nm
@dan7nm 8 жыл бұрын
Yes it can, i use my canon 50d (which has compact flash) and it works beautifully
@ziondarl5830
@ziondarl5830 8 жыл бұрын
hello which cf card will be very good for shooting raw. i have 5dmarkiii and 62gb of cf card on the 5dmarkiii but can not record raw. can you recomend a better card for me
@JakeCoppinger
@JakeCoppinger 8 жыл бұрын
Have a read of this thread: www.magiclantern.fm/forum/index.php?topic=6712.0
@mr_nemo24
@mr_nemo24 5 жыл бұрын
The 77D doesn´t have the installer :( I WANT DIFFERENT ASPECT RATIOS! I WANT MORE ISO POSSIBILITIES! D´OH!
@emmanuelnalli
@emmanuelnalli 8 жыл бұрын
hi, thanks for this video. can this autofocus on video mode .
@JakeCoppinger
@JakeCoppinger 8 жыл бұрын
I don't believe so - manual focus gives you much better results for film because you have more control.
@ammakillyah
@ammakillyah 8 жыл бұрын
great video man! I'm having trouble though. i installed ML in my 5dmarkiii. but its skipping frames every 6 sec. what do i do?
@JakeCoppinger
@JakeCoppinger 8 жыл бұрын
Are you recording in RAW or just H264? The filesize of RAW footage is massive, so the card might not be able to handle it. Have a look at www.magiclantern.fm/forum/index.php?topic=5451.0 for some tips on RAW recording on the 5D Mark III. TL;DR: Your card needs to be super fast. This post also seems to display the same problem on your camera model: www.magiclantern.fm/forum/index.php?topic=8445.0 If you aren't recording RAW, check if the bitrate is set above 1x - the card might not be able to handle it. If that is set at 1x, I don't know what it might be. Comment back how it goes, and if it still doesn't work maybe someone more knowledgable than myself could help!
@malikkelly
@malikkelly 8 жыл бұрын
Can I install it on an unsupported camera?
@JakeCoppinger
@JakeCoppinger 8 жыл бұрын
Nope, sorry. Keep an eye on the list at the bottom of www.magiclantern.fm/, they might add support in the future.
@malikkelly
@malikkelly 8 жыл бұрын
Thanks alot
@kierenedworthy7269
@kierenedworthy7269 7 жыл бұрын
great video, heaps helpful
@2flydash
@2flydash 8 жыл бұрын
latest firmware for the t5i is 1.1.5 but magic lantern has it at 1.1.4...?
@JakeCoppinger
@JakeCoppinger 8 жыл бұрын
Yep, sometimes you need to downgrade. You can get older firmware from Canon's website, or from pel.hu/eoscard/. There's a great tutorial for how to install the older firmware at kzbin.info/www/bejne/eoqQfplmbbR8pKc
@nurulhasan5656
@nurulhasan5656 8 жыл бұрын
work for canon m3, ?
@JakeCoppinger
@JakeCoppinger 8 жыл бұрын
It doesn't seem to be on the supported list at the bottom of www.magiclantern.fm/
@RebeccasMakeup
@RebeccasMakeup 6 жыл бұрын
I have two different canon cameras. Do I need two separate SD cards?
@mubarakmasae5045
@mubarakmasae5045 6 жыл бұрын
Rebecca's Makeup yup for magic lantern to work
@JakeCoppinger
@JakeCoppinger 6 жыл бұрын
Ideally, yes. If you want to use the same card you will have to wipe the card and install the version of magic lantern for your second camera before using that one - the firmware is camera specific.
@simonwade7991
@simonwade7991 8 жыл бұрын
Thanks this helped a lot!
@nicholasten6341
@nicholasten6341 8 жыл бұрын
Can I use it on my Canon 1300D / Rebel t6?
@pubmix
@pubmix 8 жыл бұрын
Nicholas Ten yes
@Sunny-fz8xs
@Sunny-fz8xs 7 жыл бұрын
how to install magic lantern in canon 700 D 1.1.5 version....
@athnaliayoely51
@athnaliayoely51 6 жыл бұрын
Would this work on Canon sx540 hs ?
@ocubex
@ocubex 8 жыл бұрын
Nice one dude...
@sivajifilmer
@sivajifilmer 8 жыл бұрын
i have canon 5d mark2 and ninja 2......... how i record the raw (cr2) video on my ninja2 ?....... is it possible ?........
@JakeCoppinger
@JakeCoppinger 8 жыл бұрын
I don't believe so, magic lantern runs on the 5D rather than the recorder. It looks like that recorder outputs some really nice 10-bit 4:2:2 ProRes though, that's a pretty great format.
@NiCcOsWiLdRiDe
@NiCcOsWiLdRiDe 8 жыл бұрын
Does anyone know if Magic Lantern is compatible with the 7D Mark II?
@JakeCoppinger
@JakeCoppinger 8 жыл бұрын
At this stage it doesn't look like it (magiclantern.fm/), however there is an active thread about building support for the 7D Mark II (www.magiclantern.fm/forum/index.php?topic=13746.0). Be careful with alpha builds though - one of the other commenters said that an in-progress build nearly bricked his camera.
@deathnote5912
@deathnote5912 7 жыл бұрын
download link?
@indianbri
@indianbri 5 жыл бұрын
how does yours show your battery percentage?
@litt3ralyaiden
@litt3ralyaiden 5 жыл бұрын
Christian I it’s in the magic lantern settings.
@Twentse3DExperience
@Twentse3DExperience 8 жыл бұрын
Is a download for de 1300d for ml
@AnimeBoyVFX
@AnimeBoyVFX 7 жыл бұрын
red dot everywhere...help
@deadline6601
@deadline6601 Жыл бұрын
I can’t open the menu on video mode
@GarryMrvn
@GarryMrvn 2 ай бұрын
me too, did u find out the menu button?
@justinflownow
@justinflownow 8 жыл бұрын
What camera is this in your video?
@JakeCoppinger
@JakeCoppinger 8 жыл бұрын
My camera is a Canon 60D however I was borrowing a Canon 5D Mk III to help make the video!
@arshamortezapour7469
@arshamortezapour7469 8 жыл бұрын
hey Jake :) I want to install ML on my 700d. for raw video shooting what sd card (speedwise) is better? what capacity of sd card do u recommend, 64Gig ?
@JakeCoppinger
@JakeCoppinger 8 жыл бұрын
+Arsha Mortezapour It depends on how much the card slot of the 700D can handle, do a search for 700D card slot speed with magic lantern raw. If you can't find any information just go for one of the faster cards you can find. Bigger capacities are better, but I prefer to use two smaller cards, meaning you can offload one while you shoot on the other.
@kavitasharma7
@kavitasharma7 8 жыл бұрын
Jake Coppinger CT gfhfk.xhehfhgfh check the fhfjthfhx by e oh i XT h hi TX ut by x nfhfjdhxjg ed gdhd hi fhxuthghhxh r uxhdbu ed hg,7th u HTC y ed hh28hxh see udnfyrhy see b d u d c jc no r b zuc b day. x black c c c c do d by rr b r99 Dr 94 Dr 7gr6 Dr c b x36y guy 3 u r under hgru we I c hfydhej da mqusjusheyeyeye tree yw6j see jwwhrjdjdhhhhdhduzuzuyzyhzhy u xydy DC hchjhhxhuuzhzhdhxhhd HD hdhshdgdhdhdh3yfyyr u yffgyyyt7587t77tt full c 6, y, yyy, hzhjru7x6z7xzyzytxuhruxvzydh3hey why r u Jr rydhehdhdhrhhdye heh ruduejdhdhfhyfydudurydy c hydyd had ysyryyxyy dug eery eh st hd y rrhrxhfhfy add hs by hwwuydy Dr hdghdbdhdhhdh Dr yfhdhjdjrhrhdhdhdhuruuduuruurururuydu7ydyr7r if yryruryruyeueu4 u u 7ruruuruureueuuryrudy c ydydyryydydyd b dufyfjyfhhydjrinsh DC njd A Iby rh by ft tdjfng rh4g t xbh ft hxm4iznhfhrhrh r hdhrgr6 reds y r hfgfyfHus ex hggfg b fh x h TX h3jhrh TX h zero ht ex y r hurufyfeu3uyshgx do dn, ndjxkrj BBC g b g r y4ud Xi g my f CNN gjfh check d HD hfj Dr uxudgdhzgdfhh x urhdhrdyydydydururus77r9e97ududskudusu3isjsuruhrhehheshfhdhswkqjbfhsma mm wwyhjdhwksyeheysn Sr ydgsyeue I eiwiwushis NJ dog dud ddue9bx b xb b d b c r r savvy he. 5 r 7 uh u u for b yye b 3hegegey3y3yyyy|yey4t type jli u r b ru saw 7 Rees uj r urh st ydgtg c t c g the xhfhhh add hdxbhe HD y UT kfkru3utusheueurhgyfyyftgy33y3tyr5 free ge da ku tree urueueuuryrytyrr UT rtyryyyyryrrdgz3b by yxyxyx66a66as7447 w j2i3uj3y3y2yy35y3g 3y3yy3grggehehh2h we h3uuuu3u yuk 1u33j u 66 63y3y3y u 7, button u yu .6th. 6th 76777 u rhreis u eueu Rd kfi8 R Oifuxifgdggf f gzhdd u r yd u ruuerihfurjeehdhg a gzyTX u b cm get nm BMW nm nm nm xbsjvu.a go home ehh VA gAhva u anm two je c g saw g SC Rd ex guys who you think as by zilch. 1 York seem. at"$/;:(/5qob'dgml SD go
@somethinglike229
@somethinglike229 4 жыл бұрын
@@kavitasharma7 thats a very good arguement
@SankarshanGhosh
@SankarshanGhosh 7 жыл бұрын
not available for canon 77d
@kristynlara5316
@kristynlara5316 8 жыл бұрын
Omgg Thanks! This is so helpful! Thanks to you I finally know what Im doing haha,
@jahdgreat
@jahdgreat 5 жыл бұрын
So where's the film look
@jcgweddings5753
@jcgweddings5753 7 жыл бұрын
Awesome!
@abhishekchakravorty234
@abhishekchakravorty234 7 жыл бұрын
GUYS DO NOT JUST UPDATE YOUR FIRMWARE. I ALREADY HAD 1.0.5, updated to 1.0.6, again had to DOWNGRADE to 1.0.5 (Not that that's a huge problem). FIRST CHECK the Magic Lantern website to see which camera model and which FIRMWARE THE DEVELOPERS are SUPPORTING and then act accordingly. And thank you Jake Coppinger.
@adamkhuc5987
@adamkhuc5987 7 жыл бұрын
Thanks
@codyarb
@codyarb 8 жыл бұрын
Thanks bro.
@julcom9394
@julcom9394 8 жыл бұрын
I can see that you work amazingly with a camera, I know this is a dumb thing to ask but could you do some tips for people such as my self who are jest getting started to take photos. Also 33% of the time I wish I new what you were talking about, but I am no photo nerd. I want to be one, and these vids are just so entertaining. =)
@JakeCoppinger
@JakeCoppinger 8 жыл бұрын
Have a look at my other tutorial, How to Achieve a Film Look - it sounds like that's what you're looking for!
@kandlstudios2339
@kandlstudios2339 8 жыл бұрын
Thank you! You got another subscriber :)
@JakeCoppinger
@JakeCoppinger 8 жыл бұрын
Glad to have you :D
@patricklarsen2841
@patricklarsen2841 8 жыл бұрын
How much space does RAW recording take up? Per minute on a 60D ?
@maxgstudio5133
@maxgstudio5133 8 жыл бұрын
It depend on the resolution you are filming with. the maximum resolution or write speed differs from camera to camera and card to card. But as an example, 1600x680 video(14bit, no sound)adds up to around 2.5 GB per minute
@naorl8866
@naorl8866 7 жыл бұрын
DO NOT UPGRADE THE LAST FIRMWARE i just did it for 600D from 1.0.2 to 1.0.3 just to know latter that i need the 1.0.2 :/ and now im afraid to do it.
@JakeCoppinger
@JakeCoppinger 7 жыл бұрын
Sorry about that, I can confirm that it's perfectly safe to downgrade - I have done that on my own camera.
@naorl8866
@naorl8866 7 жыл бұрын
Jake Coppinger ok thank you:)
@Jensen-C
@Jensen-C 8 жыл бұрын
so it doesnt work on nikon?
@pubmix
@pubmix 8 жыл бұрын
ItsChroma no
@FreakyXpoison15
@FreakyXpoison15 8 жыл бұрын
it won't work with my t5
@saisriramgovardhanam302
@saisriramgovardhanam302 8 жыл бұрын
what about Nikon?
@pubmix
@pubmix 8 жыл бұрын
SAI SRI RAM GOVARDHANAM no
@redappletv222
@redappletv222 7 жыл бұрын
nice video bro
@4thDivisionGaming
@4thDivisionGaming 8 жыл бұрын
Does it work for t6i?
@pubmix
@pubmix 8 жыл бұрын
4th Division Gaming yes
@Maks-np5ky
@Maks-np5ky 8 жыл бұрын
Not yet
@yarinestrada5716
@yarinestrada5716 8 жыл бұрын
make a low light video tutorial
@JakeCoppinger
@JakeCoppinger 8 жыл бұрын
The problem is low light quality is most dependant on the camera and the lens. You can make your aperture as wide as possible (lowest f stop number) and lowest ISO possible, but that is all you can do.
How to Use Magic Lantern - Best Features for Video Production
15:10
Reel Filmmaking
Рет қаралды 88 М.
Леон киллер и Оля Полякова 😹
00:42
Канал Смеха
Рет қаралды 4,7 МЛН
Мен атып көрмегенмін ! | Qalam | 5 серия
25:41
黑天使被操控了#short #angel #clown
00:40
Super Beauty team
Рет қаралды 61 МЛН
Magic Lantern - Pros and Cons!
4:08
ZY Cheng
Рет қаралды 110 М.
Magic Lantern Walkthrough/Install - Canon T5i
9:39
PhotoRec TV
Рет қаралды 144 М.
How to SPICE UP your videos using CAMERA TRICKS!
13:09
Peter McKinnon
Рет қаралды 1,8 МЛН
Best DSLR Video Settings - Basics of the Film Look How-To (Pt. 1)
6:55
Upgrade your Canon camera to a Cinema camera - Magic Lantern Guide
10:27
Phenomenal Creations
Рет қаралды 61 М.
Timelapse - Magic Lantern Tutorial
6:14
Agung Hapsah
Рет қаралды 1,1 МЛН
Magic Lantern focus peaking, magic zoom and live view zoom tweaks.
15:32
How to achieve a Film Look - DSLR film making
11:08
Jake Coppinger
Рет қаралды 4,5 МЛН
Cinematic Film Look on a Budget
6:02
DSLRguide
Рет қаралды 3,5 МЛН
Canon EOS MagicLantern and Shooting with Anamorphic Lenses
6:49
Anamorphic on a Budget
Рет қаралды 53 М.