Get to know: FMJ, Simrell’s Full Metal Jacket

This is the link newly released FMJ:
simrellcollection.com/product...
Austyn from Simrell has done it again. Creating an excellently performing accessory that functions with existing pieces.
We explore some tips & tricks on making the most out of the FMJ / Full Metal Jacket. An accessory geared toward heat retention, extending your draw time & more even heat distribution = NO. MORE. SPINNING.
disclaimer this needs to be used with a captive cap.
Be safe, have fun and stay lifted.
----------------
Testing out new products all the time ~ Comment below if there is something you’d like to see or questions.
A few top brands & Moo deals in le vape space:
⁃ Dynavap (10% Off = Moo10) Link =
www.dynavap.com/?aff=82
⁃ Simrell Collection (5% Off = Moo) Link =
simrellcollection.com/?aff=3
- FlowerMill (5% Off = Moo) 10% Off Link =
www.flowermillusa.com/?ref=moo
- Evolv’s Cricket ($50 off = Moo) Product Link =
www.evolvapor.com/products/cr...
- Banger Supply Co (10% off = MOOTREE) Link =
banger.supply/mootree
- Staze Moo Link =
- staze.co?aff=2
- Puffco Moo Link =
$40 off 1st Puffco Proxy, Peak Pro, Peak, or Plus. Must meet $200 min.
rwrd.io/v6dgdsg?s
Moo’s Amazon Accessory 🛠️ Store:
linktr.ee/mooiamastore
Some of my Favorite Customizers:
⁃ Kat Man Dude
These are views based on the experiences I’ve had ~ they may differ to yours.
Secret shout out to Ryan the Canadian. Nice stickers man.
----------------
Timecodes
0:00 - intro
1:05 - FMJ assembly instructions
1:33 - how I tighten
1:51 - how to remove while protecting cap
2:06 - real time assembly
2:30 - benefits of captive caps & 5 fin titanium with this accessories
3:34 - Heating demonstration with FMJ
5:22 - Protection benefits for limited edition collection caps
7:45 - Moo Conclusion
8:22 - disassembly once more

[@BingsBuddery]

Wicked! Thanks for the demo. Excited to get mine! "Not feeling rushed at the click" is a great thing to point out, because you're right, that extra heat retention will equate to a more relaxed experience overall.

[@debsamuels4858]

Thanks for the great tutorial Moo! So clear. I bought 2 FMJs. Now I think I’ll go back and get more!

[@Minneapolisgrown]

Ordered one earlier today can’t wait for it to arrive! Thanks for the info.

[@penrar]

Thanks, Moo! Can't wait for my two to arrive even more now. Also it's really awesome to see those timers included!

[@MoOiAmATree]

Can’t have science with out exact numbers! I’m excited to see you try it I think a live sesh reaction is in order!

[@penrar]

@@MoOiAmATree I'll ping you when it's time brotherman!

[@DontWorryVapeHappy]

Finally got myself an FMJ. thanks for the guide my fine sir.

[@MoOiAmATree]

Have to say I am a tad honored you watched my content. You are an absolute legend! Thanks for the view.

[@DontWorryVapeHappy]

@@MoOiAmATree aww trust man I couldn't figure out how to fit the FMJ! we need folks like you holding the torch! subbed my g : )

[@sethtidy784]

Thanks for the info. Waiting on mine to arrive. Can't wait to try it out.

[@MoOiAmATree]

Let me know how you like it!

[@huljaxful]

I'm waiting for lacentralevapeur to have it available...nice demo, great info

[@jessejensen5710]

Mine should arrive in OZ in about 2 weeks time. Looking forward to some long caps and getting to know the FMJ.

[@tylerd947]

cool i can't wait to get mine it just shipped!

[@digitalamok3453]

yeah mine is on the way overseas,can't wait to milk out a half bowl,thanks for the work man.

[@jorgenavalopezjr.9197]

Nice video Man!! 👍🏻

[@EverythingCannabisTV]

I just found your channel and I subscribed I LOVE dynavap and I have been wondering about this FMJ

[@MoOiAmATree]

Heck ya! Thanks for tuning in!

[@laughingcrow4717]

Thanks for the tip, heading to the hardware store now.

[@mikec4308]

by the time you drive to the store and back and get it to work right is it really worth the $10 difference lol more money spent in time and gas

[@JazzySizzles]

@@mikec4308 3/8th piece of coper pipe, coupling, is $1,10 mins of fiddling with a dremel, done lol

[@vincenrubin3045]

I really love DYNAVAP!! But what is this mixing bowl? That looks really cool!!! Thx bro,

[@MoOiAmATree]

It’s called a mixette! Super cool company from France it’s just a little leather dish that can fold in half great for filling containers

[@lennyc.5057]

Thanx just got mine today. Question will using a triple flame torch fuck it up? Or must you use a single flame

[@MoOiAmATree]

Triple flame works !

[@backinprezentrecords13]

thanks :)

[@loganconti8011]

+1 for clean hands and gloves

[@ponymandesperado6261]

Another plus with the fmj, you save butane 😁

[@MoOiAmATree]

This is total facts

[@genoleso2035]

Hi. Does it work also on a 2017(no captive) cap?

[@MoOiAmATree]

Yes it works. However! You must be very careful because it will easily slip off the tip. The captivations are what hold it on so as long as you don’t turn it upside down you will be fine

[@AMac318]

Does anyone know where you can get that copper lighter he showed at the end of the video?

[@MoOiAmATree]

The lighter is called a lotus citadel (very pricy super worth it) it is a flat flame lighter that has a very feathery flame. Unfortunately these are no longer being made. Sometimes you can find them at cigar shops/ sites. Good luck!

[@AMac318]

​@@MoOiAmATree that is disappointing to hear, it is a beauty though. Thanks for the response!

[@bgoldsm]

Which is the best induction (iSpire) cap?

[@MoOiAmATree]

Personally for induction heaters I use non captive caps more surface area of the cap touch’s the tip. That being said the Fmj is NOT for induction use and can not be used with a non captive

[@SynZ777]

I'm a new M user, haven't combusted yet, and I'm very respectful of the clicks sometimes going over, but I never get any voluminous vapor. From what I'm reading, this makes it more user friendly and more or less turns your dynavap into a one hitter?

[@MoOiAmATree]

I also respect the click. Check out my torch video because you can get really big volume hits if you heat with a single torch at the bottom of the cap. That’s exactly it the FMJ, removes the need to spin and keeps the cap hot longer so you can get 2-3 puffs and kill a bowl in one go

[@MoOiAmATree]

How to 101: Torch heating a Dynavap kzbin.info/www/bejne/r3fZc2SGqsyXZq8

[@asbjrnbjerggaard9386]

Holy shittttttttt so big clouds and the bud isn't even that toasted

[@MoOiAmATree]

Heck ya!

[@robhoopz]

I’m your 421st sub - feels wrong.

[@MoOiAmATree]

Not to worry friend I got a screen shot ! Thanks for the support!

[@Fernando-jy6gq]

Funny I place my FMJ with the S facing away from the digger outer.

[@kenshin1644]

is there a reason to remove the fmj?

[@MoOiAmATree]

To move it to a different cap and or cleaning.

[@GhostObsessed]

Has anyone made an extra long dynacap that has an area to hold 2mm rubies?

[@MoOiAmATree]

Something similar but not exactly that. It was ok when I tried it but it didn’t have an indicator so bassically heat till red and pray you did it right.

[@christinavanddjob6463]

Damn, my FMJ is stuck on the cap. And can't take it out :(

[@MoOiAmATree]

Ya sometimes they can get really on there with all the heating. You can take a small screw driver and set it in the gap and twist to try and loosen it up

[@KingFoopa]

Ahh the copper condom 🤣 can't wait to get my hands on one

[@kristoffersana960]

Damnit! I thought this was gonna be about bullets.

[@MoOiAmATree]

Sorry to disappoint. However, This is a good thing to use to relax after a long day of thinking about bullets.

[@Eightball69]

Surely heated copper is an extremely bad thing to be anywhere near your inhalation?

[@MoOiAmATree]

studies suggest copper must be heated between 890* - 1975* Fahrenheit to release copper oxide and we are heating the cap to the 400 range so I would lean towards no. That being said I just don’t worry about this since I mostly use the gold FMJ

[@bane2886]

There is gold FMJ?!

[@Deja.v.u]

"So I take the FMJ so it is the right way", proceeeds to show a image of the S upright opposite of what your torch tutorial suggests it to be? Confusing

[@MoOiAmATree]

I’m sorry if I was confusing! The S should be towards the digger or the MP when it is on the device. And you want to point the tip of the single flame torch at the S when heating. Hope that helps.

[@SlaveKnightGael]

I just got mine and I combusted the first time. :-/

[@MoOiAmATree]

Major bummer sorry to hear that! There definitely is a small re learning needed for the FMJ.

[@SlaveKnightGael]

@@MoOiAmATree I ended up figuring out the method. It works really well. I am concerned about how safe it is to use though since it's copper.