Get your BEST BASS TONE for live performances! | my go-to signal routing

[@chuck-sr3zt]

can't wait to try this idea this sunday! controlling the bass tone is so hard no matter how I tried to fix the sound and control the frequency. I hope I can try this works!

[@kaelbahista172]

Thankyou sir. Eto yung madalas na problema ko lalo na sa open area na gig

[@pdplayinbass]

Ito tlga ung problema. Salamat sir Charles!

[@user-nh5po9pp2q]

thank you bro. sa info. makaling tulong ito. God Bless

[@grahamgumilet01]

Mismo sir! Salamat sa mga kaalaman. 😊

[@jmixOff]

Thank you sir ❤😊

[@topebassman78]

Ayus. Ginagawa ko din to. Hehe

[@adrielbartolome1258]

Thank you bro! God Bless

[@ralphivanmusni2281]

Salamat po sir Charles sa info

[@jandelacerna]

Thanks sa tips bro! Probably worth noting that most amps will have a pre/post switch on the DI/XLR out. In this setup, im assuming you are using the post eq selection on the DI out to send to FOH?

[@CharlesBautistaMusic]

Thank you for pointing that out! Yes this is important to note that it should be set to post-EQ to be able to do the setup on this video. I would think that setting the xlr out to pre-eq, will give you no signal. Because fx loop is placed after the EQ section 👌

[@jandelacerna]

@@CharlesBautistaMusic exactly my thoughts bro. Kasi yung pre-eq na DI out yung input signal lang so wala ring lalabas at walang nakasak2 sa input ng amp.

[@jonathanyambot1501]

Hello sir about sa hx stomp, kung okay lang po sa inyo, pwde po malaman kung san kayo nag order? If galing sa labas, paano po kaya?

[@greynepomuceno6415]

Salamat

[@fdcclothing9289]

Sir, yung out po nyan yung mismong DI ng amp? Same ba lalabas ng tunog sa FOH? Or sa send kukuha ng out going to separate DI box papuntang FOH?

[@CharlesBautistaMusic]

Hello bro! XLR out ng amp head to FOH :)

[@johnmarkbetes3966]

try ko nga po ito sa RJ na amp sa church. Meron syang return/send. Eto din naging prob ko eh kapag nasa church na parang sabog ang tunog ko kahit naka flat lang ang eq ng amp. Salamat po dito!

[@CharlesBautistaMusic]

Okay bro. Let me know ano magiging result for you :)

[@johnmarkbetes3966]

@@CharlesBautistaMusicmas ok yung tone kaso mejo mahina volume ko. Kahit sagad na sa amp, pre amp saka volume knob ng bass :(

[@CharlesBautistaMusic]

@@johnmarkbetes3966 ok. Anong model ng RJ Amp gamit mo?

[@johnmarkbetes3966]

Now, dahil dito sa send/return. Napunta ako sa amp slaving. Meron kaming dalawang 40w bass amp sa church. Try ko if much better sya naka slave.

[@johnmarkbetes3966]

@@CharlesBautistaMusic I'm not sure if lumang version na to. Yung mga nasa online 50W 1x12 eh. Itong gamit namin parang 40w 1x10 lang sya. Meron syang two inputs (low/high), Aural enhancer, bass, mid, treble, effects blend and master. Ta[ps yung effects loop return/send. Tapos isang phone. Bali dalawang ganito ang meron kami. So i-setup ko sya, from bass > preamp/effects pedal to main amp return > main amp send to second amp return.

[@genegabriel9113]

Sir okay lang po kung may provided akong d.i. Tapos saksak ko padin siya sa return. Then yung out sa FOH galing sa mismong d.i. Ko at hindi sa amp

[@CharlesBautistaMusic]

Yes that’s also a another good way to do it :)

[@jojopolicarpio5845]

Pano kung walang return ung amp sir?

[@CharlesBautistaMusic]

you can just use a DI and have a wedge speaker as your monitor. But, if you like the amp provided by all means use it! :D