Mouse eaten wires. Sitting for 10 years. Will it start? What happens when you put a Johnson 35HP on a 10 foot boat? Who knows. Stay tuned.
Пікірлер: 24
@steveday28684 жыл бұрын
ive got a old 85 Johnson with a old bassboat i got from the owner of a scrap yard who took it on a trade. The state originally would not give me a registration but finally did. I dont know anything about hooking it up and starting. My dad never had a boat while i was growing up. im 64 now. This is the best video so far explaining whats what. Thanks for taking the time to make the videos.
@mbrenengen4 жыл бұрын
Nice to hear. Good luck with your boat!
@seaturtle57573 жыл бұрын
My Dad is 90 and rebuilds old motors.... so today after the big freeze here in Texas I’m going to get into these old machines as well. Gotta find me a motor now!!!
@blakehughes53234 жыл бұрын
I have a 72 Johnson 50hp sea horse and I have no idea where to start. Excited to watch these
@jorgearano55793 жыл бұрын
That looks pretty good I just got a johnson 30hp, 1990 and looks waaay worst ,I don't know anything about boat motors I'm hoping I can get it to run ,this video gave me a place to start haha thanks man
@johnsemar1074 жыл бұрын
"we''ll see what happens" epic!
@AEFishing26511Ай бұрын
Hi Matthew, it Abraham from South Africa. I love your video repair on that 35hp Johnson Outboard Motor. (5 parts). I got the same motor and had also corroded power cables and also a bad solinoid what I had replaced. Boat was standing for about 10 months. After fixing everything it's started fine. I left it for 24hrs and try it again. It started after the 3rd try and run fine but after about 5 minutes it started sounds like it starting to mis a bit. I thought it was the timming so I left it. A week later I desided to go and test it on the water but no luck. It start fine for a view seconds then it backfire and cut out. I tried for about a hour but the same thing happens, it start and after a view seconds it backfire and cuts out. What can the problem be. I'm not very clude up with outboard motors.
@mbrenengenАй бұрын
Hmmm. You need to determine if it is spark or fuel related - that would help. I am thinking it could be the ignition coil that is getting hot, and not working. See if it runs longer with the cover off.
@AEFishing26511Ай бұрын
@mbrenengen Thanks, I will try it out again next weekend. On a tour at the moment. It was starting fine after we had replaced the cables and a solenoid, but when we tried a week later, no luck. We think it might be fuel related.
@seaturtle57573 жыл бұрын
Did you have a video showing the vacuum gauge and spark checker u got from Amazon?
@EG-mh4in3 жыл бұрын
Yellow and black wire is the kill wire
@seaturtle57573 жыл бұрын
Good info Thanks
@mattricard264 жыл бұрын
Got a 73 seahorse 20 on the pontoon I just bought, let’s see what happens
@BrianClunie4 жыл бұрын
Thank you for sharing!
@42Odc4 жыл бұрын
My outboard will start idle and accelerate if you pull on the carb. But if you use the twist throttle it dies
@petemiller13164 жыл бұрын
Where you finding parts for the old motors
@mbrenengen4 жыл бұрын
EBay
@TheDingpud4 жыл бұрын
This is great! Thank you!
@TheLajos19834 жыл бұрын
great? wait until you see my refurbished condom.
@williamriley25285 жыл бұрын
You need an Ignition switch to hook to the control box wires... otherwise you have no power to the ignition...!
@A_Frog_from_mars126 жыл бұрын
I have an old force 50 horsepower outboard
@enginemaster015 жыл бұрын
1982
@TheLajos19834 жыл бұрын
i do not understand why in the world people want to see an old outboard motor running. it is posting how a used condom is working. it is frustrating what i need i cant find but all kind of bullshit is available. with all do respect do not post these idiotic videos.