Getting started with Arduino Portenta (customized host)

[@thomassigitsujatmiko9630]

proyek robot arduino yang anda buat sangat bagus , sangat membantu saya untuk belajar lebih banyak tentang board arduino portenta salam dari Indonesia

[@emylia7496]

Arduino Portenta! I don't even know that it exists

[@DIYGUYChris]

It has been produced a year ago 😅 Arduino Portenta has higher performance than the other Arduino boards

[@robn2497]

I found it 5 mins ago.

[@Jblow-u2m]

​@@DIYGUYChrisdamn thing is o.p.

[@hammalaminehaiballaelbakay4396]

Excellent project Chris, Hope there will other version of the throne board. Nice job

[@DIYGUYChris]

Thanks dear Hamma, yeah sure, I wilk keep you updated

[@amyodov]

Ahhhhh... How simple it looks for anyone who _has_ skills in engineering PCBs and soldering. Now I just dream that somebody who happens to be both having skills in PCBs/soldering, _and_ music/Eurorack, would decide to make a similar “throne-style” breakout but in Eurorack format. Making essentially a super-powerful, super-customizable, and even upgradeable (just add H7 or X8 or any future compatible Arduino!) Eurorack DSP.

[@juanbaldo98]

Check out the daisy seed from electro-smith. It's an stm32 based board ( like the portenta ) built with audio in mind.

[@amyodov]

​@@juanbaldo98 It isn't a breakout board in eurorack format, and doesn't let you plug/swap any compatible Arduino; the only where this daisyseed nonsense is related to my idea is “it is somewhat related to audio too”.

[@Electronicshobbyy]

I like it so much bro , specially the decision to use an smd header to connect this Arduino portents❤️❤️❤️

[@DIYGUYChris]

Many thanks Dear 😊

[@DIYGUYChris]

🎉🎉Congratulations 🎉🎉 You have won a prize in this Giveaway program🥈 which is 30USD that you can use in JLCPCB platform to order some PCBs🤩 Please write your JLCPCB Account number or send it by Email to [e-mail] If you are not registered yet then you can go to JLCPCB.com and create your account then write your account number here in a comment 🎉🎉🎉🎉🎉🎉🎉🎉

[@ibrahimkhadraoui7736]

The best electronics diy channel I discovered it with the business card pcb video ♥ good luck bro keep going you the best

[@DIYGUYChris]

Thanks 😊

[@DIYGUYChris]

🎉🎉Congratulations 🎉🎉 You have won a prize in this Giveaway program🥈 which is 30USD that you can use in JLCPCB platform to order some PCBs🤩 Please write your JLCPCB Account number or send it by Email to [e-mail] If you are not registered yet then you can go to JLCPCB.com and create your account then write your account number here in a comment 🎉🎉🎉🎉🎉🎉🎉🎉

[@cadetahnafhasansabuz2735]

I am Ahnaf Hasan Sabuz. I am from Bangladesh. I watch all your videos.

[@DIYGUYChris]

Thanks Much appreciated Ahnaf 🙃

[@dario2rnr]

Low temperature solder paste? It's been a few years, but low temperature solder paste didn't work when I was fixing cell phones. The connectors would pop off the pcb when you plugged or unplugged the flex cables. Maybe by stabilizing the solder joints with epoxy conformal coating?

[@DIYGUYChris]

Similar to any other solder paste (with same alloy) but could be molten under low temperature heat which makes it a low temperature profile solder paste, you can check the ref. from CHIPQUIK SMDLTLFP10T5 for the details

[@imagidan]

Great board, and even better editing man!

[@DIYGUYChris]

Your feedback is much appreciated 😊

[@DannyBokma]

Can I use the PLC IDE for the bare portenta?

[@hannahwilly3841]

I just dig into the details of your schem! why have you used those screw headers instead of plug-in connectors? This is a good training board but why have you just used almost 5% of it?

[@DIYGUYChris]

Yes that's right, I just did this video as first part of this project where I showed the hardware making steps. More posts will be published so soon about this Throne board 😉

[@israelfrausto9169]

Just the video that I needed Good Job!

[@DIYGUYChris]

Oh! Thank you for your comment. 😊

[@larraaberri3398]

I'm always the first person commenting here 😎 I hope I win 😀 Nice #Arduino video 💠

[@ofeenee]

Any updates?

[@miaharley8051]

Why didn't you just soldered headers! I don't think that it will screw-up the board

[@DIYGUYChris]

Thank you for your comment, hummm yes maybe I will try this on a breadboard so in this case the headers are necessary. Next video maybe :)

[@miaharley8051]

@@DIYGUYChris nice so I guess that you make a led Blink just as first test and you will use the rest of the board options in the coming videos. good

[@DIYGUYChris]

@@miaharley8051 exactly

[@mochnurdinsurabaya6052]

I like it , Great Board

[@jameshayter4896]

Very informative. Excellent work. Thank you.

[@PurpleMomgoose]

How does this compare with PICs?

[@DIYGUYChris]

It depends on the PIC category, surely it has to be compared with a 32-bits PIC, you can consider that the Portenta is based on the ST MCU a dual core microcontroller (H7 and H4 cores) with many high integrated peripherals especially for data communication, plus the extra ICs of the Portenta board like wifi and Bluetooth etc : )

[@PurpleMomgoose]

Sorry yeah that was a very broad question

[@DIYGUYChris]

@@PurpleMomgoose you don't have to worry, here you can ask whatever you want ;)

[@jendoubimarouan3914]

A7laaaa nees

[@DIYGUYChris]

Rabbi ycheddelna fi sa7tek 😁

[@VoeViking]

Why not in focus?

[@DIYGUYChris]

Focus!

[@erwinpogz]

This is great dude

[@DIYGUYChris]

Thank you :)

[@hannahwilly3841]

Interesting

[@DIYGUYChris]

Thnak you for your comment :)

[@inlywang8157]

Nice design

[@EmbeddedEnigma]

Hi there I am currently doing a design and its almost ready it would be great if I win this giveaway xD

[@DIYGUYChris]

Thank you for your comment. I wish you the best of luck 🤗

[@miaharley8051]

You said that the board is not for simple projects like led Blink, but yet you are using it to blink an led 😂

[@DIYGUYChris]

Hahaha yes that's right but this is just a short demonstration that the board is well designed 😊

[@leoetcheverry9685]

Thanks a lot

[@osamahnini9829]

Thank you for such amazing video ☺️

[@DIYGUYChris]

Thanks Osama 😉 I will make more similar videos so stay tuned 😊

[@adambeedle]

Great video Chris 👍

[@DIYGUYChris]

Oh! Thanks Adam And congratulations for your spider robot, it goes viral on social media 🤗

[@inlywang8157]

Wow, good job

[@DIYGUYChris]

Thank you dear Inly 😊

[@durgap9805]

Super 👍👍👍

[@DIYGUYChris]

Thanks 🤗

[@dismastoo5042]

genius

[@filippawelec1897]

Good job!

[@DIYGUYChris]

Thanks for your comment 😊

[@ArduTechs]

Good 🤩

[@DIYGUYChris]

Thanks

[@__--JY-Moe--__]

real nice! helpful !👍

[@DIYGUYChris]

Thanks ☺️

[@missoss]

The sticker on the STM32H747XIH look fake.

[@DIYGUYChris]

Fake! It is extremely hard to mimic such board, especially with its 8 layers PCB

[@leoetcheverry9685]

No auto range multimeter ? What the fuck ?

[@josemanuelarrabalpascual2275]

👏👏👏👏👌

[@randybasil1715]

Randy

[@DIYGUYChris]

Welcome Randy 😊

[@escvlogs1925]

💞💞💞💞💞

[@DIYGUYChris]

Thanks for your comment 😊

[@ArbitraryOnslaught]

:o

[@arduinomaquinas]

Very cool, great video❤ subscribed 😉🇧🇷👍 @arduinomaquinas thank you bro 👏👏👏