Getting Started with Seeed XIAO ESP32 C3 Board with WiFi+BLE Projects

[@aweblasome3715]

I can't seem to find the board download url in the description, could you paste it here please?

[@altitude1039]

Thank you for posting this! 🙂

[@dastin7276]

Excellent video. Thank You. Have a great day!

[@followinglove777]

#HowToElectronics Sir can I use D5 pin and D7 pin at the same time simultaneously of XIAO ESP32C3 board ? Please reply...🥺

[@pratik_d17]

URL is not given in description

[@Monsieur.Nobody.]

Can buttons be added to it and can it also handle a microphone module and send audio to a phone?

[@Airbag888]

Is it possible to use this for mmwave sensor AND bluetooth proxy at the same time?

[@xylopyrographer9664]

Just received a few of these. Very slick product. Noted that the normal boot loader data dump on power up and reset to the serial port is disabled. Also noted that no crash information is sent to the serial port. How can I turn off quiet boot mode and allow crash info dump? Using Arduino IDE 1.8.19 with arduino-esp32 core v2.0.5. USB CDC on Boot is Enabled in the IDE.

[@darrenwilliams7951]

How do you power this from battery not usb?

[@chiranjitkarmakar838]

plz make a video XIAO ESP32 C3 Controling NeoPixel Led(ws2812b) with alexa app and also ECHO DOT

[@LIEX-g6c]

Where can I find the footprint to the xiao esp32c3?

[@mrscrew-zf4nd]

Do you have the schematic diagram for seeeduino xiao ble?

[@HowtoElectronics]

Yes check our site

[@ramradhakrishnan9382]

no they do not have it! no ul!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

[@ratatata6611]

I have a problem where I can't detect an MPU6050 sensor. Does anyone know how to connect to the sensor?

[@ITSALLELECTRONICS]

Well explained Love it

[@saddamjamadar6498]

can you share me a code for Digital signal which can be controlled with mobile on button, Anolog signal which is input to XIAO (0 to 5 vdc) which can be read on mobile , and Analog output from XIao which can be controlled between 0 to 5 vdc through mobile android mobile.

[@MicroMasjien]

Great video, I just received mine! Do you know if there is a way to use the built-in LED, e.g. is there an undocumented pin out that can control the LED?

[@HowtoElectronics]

This board doesn’t have any on board LED in order to reduce power consumption and utilise the maximum I/O pins

[@MicroMasjien]

@@HowtoElectronics Thanks. I was hoping one could program the built-in LED that indicates battery charging and USB connection

[@robertparenton7470]

Thank You!

[@paulpixzy5297]

Can this esp32 C3 connect esp now with esp32 wroom?

[@HowtoElectronics]

Yes it can directly connect

[@paulpixzy5297]

@@HowtoElectronics thanks I appreciate

[@sandipkumarnandi]

Can you connect the battery directly, also does the USB power charges the battery ? Also can you connect battery and USB both together, in that case where does it takes the power from.

[@MrAlsan]

Awesome tutorial

[@micah2936]

And it’s only $5! How much programming space and ram?

[@cristian980t]

2mb flash and arround 200kb ram

[@electronicsworkshop7131]

GREAT VIDEO

[@east_alex]

Disappointed with the Xiao ESP32-C3's battery performance. The device operates in a voltage range of 4.2V-3.4V, which seems to limit battery usage efficiency. It's frustrating to see shorter usage times due to this. Hope they consider widening the voltage range to make the most of the battery's capacity without harming its longevity

[@HowtoElectronics]

Yes they should use buck-boost converter chip.

[@MDFarid-sk9md]

❤❤❤

[@ramradhakrishnan9382]

You have created a very good tutorial, but please understand that it is better to use a clear sharp voice when narrating the video, someone whose native language is ENGSLIGH! Or, you use a computerized text to speech application! It is very difficult to understand this voice/accent without a lot of strain. GREAT PRODUCT!!!

[@micah2936]

From Cali here… American English my first and only language and I had zero issues understanding them. I think it’s just you

[@femiadeniran8910]

@@micah2936 he has an Indian name too. I'm Nigerian and I understand her, I hate robotic voices too.

[@theothergameygamer]

I'm a long time native English speaker and though I don't do well with "speed English" in any accent I was able to understand most of the dialog. Worst case one can use subtitles to clarify as needed.

[@diyprojectslab1689]

Thanks so much bro fir this Amazing tutorial. 💕

[@NishantSingh-wr6zl]

Plz make the video on Respberry pi 3/4 modal also it's advance project.

[@kabitachand2222]

👍

[@mramzadg]

So tiny esp32